ETH Flex•Tone™ Series Signaling Devices Remote Speaker / Amplifier Explosionproof Dust-Ignitionproof Raintight Wet Locations Cl. I, Div. 1 & 2, Groups B, C, D Cl. II, Div. 1 & 2, Groups E, F, G Cl. III UL and cUL 464 and 1203 Listed 5S Eaton's Crouse-Hinds Flex•Tone Series Explosionproof Remote Speaker/Amplifier is designed for remote mounting in Division 1 areas where simultaneous high decibel signaling is required. Used in connection with the Panel Control Signaling Generator, the Flex•Tone ETH845 operates directly from local power sources, allowing remote speaker/amplifiers of different voltages to be connected within the same system. Available in both AC and DC voltages, the Flex•Tone can be mixed and matched throughout an application using the available line power. ETH845 Series Remote Speaker/Amplifiers must be used with Eaton's Crouse-Hinds Flex•Tone Panel Control Signal Generator on next page. Explosionproof Remote Speaker/Amplifier Applications: • For use where simultaneous signaling of a high decibel sound is required for alert or evacuation in hazardous locations. Features and Benefits: • • • • Heavy duty zinc cast construction. Individual volume control. Corrosion-resistant heat-flowed epoxy finish. Supplied with factory sealed 1/2" threaded fitting for quick installation. • Speaker can swivel 180° vertically or horizontally depending on orientation of mounting bracket. • Mounts onto any surface using only three bolts. • 30" numbered wire leads. Certifications and Compliances: • • • • Class I, Division 1, Groups B, C, D Class II, Division 1, Groups E, F, G Class III UL and cUL 464 and 1203 Listed Materials and Finishes: • Body – Heavy duty zinc cast construction • External hardware – Stainless steel Ratings: • 120VAC, 240VAC, 125VDC and 250VDC Output Sound Pressure: • 109 decibel (dBA) output Ordering Information: Cat. # Voltage Explosionproof Remote Speaker/Amp ETH845/24 24VDC ETH645/24 24VAC, 50/60Hz ETH645/120 120VAC ETH645/240 240VAC ETH845/125 125VDC ETH845/250 250VDC Signal OFF Standby Current (Amps) Signal ON Operating Current (Amps) 0.061 0.250 0.088 0.091 0.031 0.091 0.250 0.950 0.260 0.190 0.130 0.070 ETH845 Series Remote Speaker/Amplifiers must be used with Eaton's Crouse-Hinds Flex•Tone Panel Control Signal Generator on next page. 5S ETH845 Series Remote Speaker/Amplifiers accept a 10VAC audio signal from Flex•Tone Panel Control Signal Generator. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 1291