DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes FOUR (4) T6 G12
Metal Halide lamps.
Catalog #
Type
Project
Comments
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts
are mounted in a separate metal
enclosure box attached to the junction
box with 18" (457mm) of flexible
conduit. Ballast enclosure includes a
separated wiring compartment and
two knockouts for conduit entry and
features a perforated metal door for
easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and ballast enclosure) is removable from
the housing for easy maintenance.
E.... Lamps
Four (4) T6 G12 Metal Halide lamps with
reflectors mounted in adjustable double
gimbal. Lamp holder is individually
removable and may be regressed
1" (25mm) for additional cut-off. 45° x 45°
locking lamp adjustment. Lamp ring
features beveled edge and lockable
accessory ring that can accept one optical
accessory. Additional media holder* can be
ordered to allow fixture to accommodate
up to 2 accessories plus one snoot or
cross baffle. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes G12 sockets.
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
A mounting frame is provided which inserts
into the ceiling opening. The housing is
then pushed through the mounting frame
and secured with screws.
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Four (4) Light
T6 G12 Metal Halide
Remodel Housing
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 7.94" x 27.84"
(202mm x 707mm)
11.31"
Double
Gimbal
COMBOLIGHT®
29.55"
287mm
751mm
9.95"
45º x 45º
Adjust
253mm
1.70"
43mm
8.19"
28.25"
9.45"
208mm
240mm
27.58"
Required
above
ceiling
16.44"
701mm
718mm
26.75"
680mm
6.69"
170mm
418mm
Integral Electronic
Metal Halide Ballasts
*Media Holder:
White - LNF-MH-W
Black - LNF-MH-B
Silver - LNF-MH-S
9.25"
6.69"
170mm
235mm
Separate Wiring Compartment
T6 G12 Lamp with Reflectors
This fixture utilizes T6 Metal Halide lamp and includes highperformance clear aluminum reflectors in narrow, medium,
or wide distributions. Non-standard color reflectors are
available upon request.
Thermal
Protector
18" (457mm) flexible conduit
ORDERING INFORMATION
C4
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
R
E
Lamp Type / Wattage Label / Reflector Type
039T6N = 39 Watt T6 G12 Metal Halide / Narrow
039T6M = 39 Watt T6 G12 Metal Halide / Medium
039T6W = 39 Watt T6 G12 Metal Halide / Wide
070T6N = 70 Watt T6 G12 Metal Halide / Narrow
070T6M = 70 Watt T6 G12 Metal Halide / Medium
070T6W = 70 Watt T6 G12 Metal Halide / Wide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 06/12/2013