DESCRIPTION Catalog # An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange suitable for downlighting and accent applications. Utilizes FIVE (5) PAR38 120V Project lamps. For new construction applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing. Type Comments Date Prepared by SPECIFICATION FEATURES A.... Housing Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a 0.75" (19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50" (13mm) to 1.25" (32mm) ceiling thickness. Optional Chicago Plenum configuration available. conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’. B.... System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. E.... Lamps Five (5) PAR38 120V lamps mounted in adjustable double gimbals. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory. Additional media D.... Electrical Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance. C.... Junction Box Junction Box is UL listed for through branch wiring, 6 #12 90º C supply holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets. COMBOLIGHT® Next Generation Recessed Multi-Lamp Fixture F.... Mounting Butterfly Brackets accept 1/2" (13mm) EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Five (5) Light PAR38 120V G.... Labels cULus listed for non-type IC applications, suitable for use in damp locations. New Construction Housing Ceiling Cut-Out: 7.49" x 34.24" (190mm x 870mm) 16.01" w/ 0.75" (19mm) Trim Flange 43.89" 407mm 1115mm 9.45" 240mm 8.19" 34.94" 208mm 39.76" 1010mm Double Gimbal 888mm 33.44" 849mm 6.69" 170mm 6.69" 170mm 45º x 45º Adjust *Media Holder: White - LNF-MH-W Black - LNF-MH-B Silver - LNF-MH-S Electrical Enclosure / Wiring Compartment For use with PAR38 120V lamps 100W max. Thermal Protector ORDERING INFORMATION C5 Configuration C5 = COMBOLIGHT Recessed Five (5) Light N Lamp Type / Wattage Label 100P38 = 100 Watt max. PAR38 120V Housing N = New Construction C = Chicago Plenum www.cooperlighting.com 1 Primary Voltage 1 = 120V Power Supply N = None - Line Voltage Lamp T Lamp Mechanism G = Double Gimbal R = Retractable Double Gimbal Trim Flange T = 0.75" (19mm) Trim Flange Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 Trim Finish W = White B = Black S = Industrial Silver Housing Interior/Electrical Door/Sleeve Finish W = White B = Black S = Industrial Silver rev 05/31/2013