DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes TWO (2) PAR38 Metal Halide
lamps.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trimless
meshplate assembly are all steel
construction. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a clean
edge. Can accommodate 0.50" (13mm) to
1.25" (32mm) ceiling thickness. Optional
Chicago Plenum configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
Two (2) PAR38 Metal Halide lamps
mounted in adjustable double gimbals.
Lamp holder is individually removable
and may be regressed 1" (25mm) for
additional cut-off. 45° x 45° locking lamp
adjustment. Lamp ring features beveled
edge and lockable accessory ring that
can accept one optical accessory.
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be
configured for remote power.
Additional media holder* can be ordered
to allow fixture to accommodate up
to 2 accessories plus one snoot or
cross baffle. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes Med. base sockets.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and
bar hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
Two (2) Light
PAR38 Metal Halide
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
New Construction
Housing
Trimless
Ceiling Cut-Out: 7.49" x 14.18"
(190mm x 360mm)
23.83"
16.01"
605mm
407mm
9.45"
240mm
13.01"
19.70"
331mm
500mm
Double
Gimbal
6.69"
13.38"
340mm
170mm
6.69"
170mm
45º x 45º
Adjust
*Media Holder:
White - LNF-MH-W
Black - LNF-MH-B
Silver - LNF-MH-S
Integral Electronic
Metal Halide Ballasts
For use with 70W or 100W PAR38 Metal Halide lamps.
Thermal
Protector
ORDERING INFORMATION
C2
Configuration
C2 = COMBOLIGHT
Recessed Two (2) Light
E
Lamp Type / Wattage Label
070M38 = 70 Watt PAR38 Metal Halide
100M38 = 100 Watt PAR38 Metal Halide
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
N
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Insert Finish
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 06/14/2013