DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange suitable for downlighting and accent applications. Utilizes SIX (6) PAR30 120V lamps.
For remodel applications. Insulation must be kept 3" (76mm) from all sides and at least 1" (25mm) above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing and junction box are aluminum, trim assembly is steel with powder coated finish. Fixture utilizes a removable trim sleeve to provide a 0.75" (19mm) flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate various ceiling thickness.
D ... Electrical
Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Electrical components on individually removable “trays” for easy maintenance.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
E ... Lamps
Six (6) PAR30 120V lamps mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory. Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes
Med. base sockets.
F ... Mounting
A mounting frame is provided which inserts into the ceiling opening. The housing is then pushed through the mounting frame and secured with screws.
G ... Labels cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 6.94" x 35.23"
(176mm x 895mm)
®
w/ 0.75" (19mm) Trim Flange
Double
Gimbal
10.31"
262mm
36.94"
938mm
7.95"
202mm
45º x 45º
Adjust
7.19"
183mm
7.45"
189mm
Required above ceiling
34.97"
888mm
35.64"
905mm
5.69"
145mm
34.14"
867mm
5.69"
145mm
*Media Holder:
White - LND-MH-W
Black - LND-MH-B
Silver - LND-MH-S
For use with PAR30 120V lamps 75W max.
ORDERING INFORMATION
C6
Configuration
C6 = COMBOLIGHT
Recessed Six (6) Light
R
Lamp Type / Wattage Label
075P30 = 75 Watt max. PAR30 120V
N www.cooperlighting.com
1
Primary Voltage
1 = 120V
T
Thermal
Protector
Lamp Mechanism
G
R
=
=
Double Gimbal
Retractable Double Gimbal
Trim Finish
W = White
B
S
= Black
= Industrial Silver
Housing
R = Remodel
Power Supply
N = None - Line Voltage Lamp
Trim Flange
T = 0.75" (19mm)
Trim Flange
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Housing Interior/Electrical Door/Sleeve
Finish
W =
B =
White
S =
Black
Industrial Silver rev 05/15/2013