DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FOUR (4) PAR30 120V lamps.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
Comments
at least 1" (25mm) above the housing.
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trimless meshplate is steel with powder
coated finish. Perforated meshplate allows
for trimless installation in drywall/plaster
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes a
beveled “knife-edge” lips to ensure a
clean edge. Can accommodate various
ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
Double
Gimbal
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
E.... Lamps
Four (4) PAR30 120V lamps mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming.Includes
Med. base sockets.
F.... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
G.... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Four (4) Light
PAR30 120V
Ceiling Cut-Out: 6.94" x 23.85"
(176mm x 606mm)
Remodel Housing
Trimless
25.56"
10.31"
649mm
262mm
7.95"
202mm
45º x 45º
Adjust
12.01"
305mm
29.08"
7.45"
189mm
23.59"
Required
above
ceiling
739mm
599mm
22.76"
578mm
5.69"
145mm
5.69"
145mm
*Media Holder:
White - LND-MH-W
Black - LND-MH-B
Silver - LND-MH-S
Perforated Meshplate
Thermal
Protector
For use with PAR30 120V lamps 75W max.
ORDERING INFORMATION
C4
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light
R
N
Lamp Type / Wattage Label
075P30 = 75 Watt max. PAR30 120V
Housing
R = Remodel
www.cooperlighting.com
1
Primary Voltage
1 = 120V
Power Supply
N = None - Line Voltage Lamp
N
N
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Insert
N = Trimless
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Insert Finish
N = Trimless
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/16/2013