DESCRIPTION
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes FOUR (4) MR16 Metal Halide lamps.
For new construction applications. Insulation must be kept 3 " (76mm) from all sides and at least 1 " (25mm) above the housing.
SPECIFICATION FEATURES
A ... Housing
Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50
"  (13mm) to
1.25
"  (32mm) ceiling thickness. Optional
Chicago Plenum configuration available.
B ... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.
D ... Electrical
Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be configured for remote power.
E ... Lamps
Four (4) MR16 Metal Halide lamps mounted in adjustable double gimbals.
Lamp holder is individually removable and may be regressed 1 "  (25mm) for additional cut-off. 45° x 45° locking lamp adjustment. Lamp ring features beveled edge and lockable accessory ring that can accept one optical accessory.
Additional media holder* can be ordered to allow fixture to accommodate up to 2 accessories plus one snoot or cross baffle. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes GX10 TAL sockets.
F ... Mounting
Butterfly Brackets accept 1/2 "  (13mm)
EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps along housing sides for securing trimless insert to fixture and drywall.
G ... Labels cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 4.67
" x 16.30
"
(119mm x 414mm)
13.19"
335mm
25.95"
659mm
21.82"
554mm
5.75"
146mm
10.24"
260mm
Double
Gimbal
15.50"
394mm
21.86"
555mm
3.88"
99mm
®
45º x 45º
Adjust
3.88"
99mm
Perforated
Meshplate
*Media Holder:
White - LNB-MH-W
Black - LNB-MH-B
Silver - LNB-MH-S
For use with GE 20W or 39W CMH MR16
ORDERING INFORMATION
Integral Electronic Metal Halide Ballasts Thermal
Protector
C4
Configuration
C4 = COMBOLIGHT
Recessed Four (4) Light www.cooperlighting.com
Lamp Type / Wattage Label
020C16 = 20 Watt MR16 Metal Halide
039C16 = 39 Watt MR16 Metal Halide
E
Power Supply
Voltage
1 =
2 =
4 =
120V
277V
240V
N
Lamp Mechanism
G
R
=
=
Double Gimbal
Retractable Double Gimbal
N
Trim Insert Finish
N = Trimless
Housing
N
C
=
=
New Construction
Chicago Plenum
Power Supply
E = Electronic Metal Halide
Ballast
Trim Insert
N = Trimless
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Housing Interior/Electrical Door/Sleeve
Finish
W =
B =
White
S =
Black
Industrial Silver rev 05/09/2013