DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes FOUR (4) T4 GU6.5
Metal Halide (GE® Constant Color Super Mini) lamps in a 2x2 square
configuration.
Catalog #
Type
Project
Comments
Date
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
Prepared by
at least 1" (25mm) above the housing.
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18" (457mm) of flexible conduit. Ballast
enclosure includes a separated wiring
compartment and two knockouts for
conduit entry and features a perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and ballast enclosure)
is removable from the housing for easy
maintenance.
E.... Lamps
Four (4) T4 GU6.5 Metal Halide lamps
with reflectors mounted in adjustable
double gimbal. Lamp holder is individually
removable and may be regressed
1" (25mm) for additional cut-off. 45° x 45°
locking lamp adjustment. Lamp ring
features beveled edge and lockable
accessory ring that can accept one optical
accessory. Additional media holder* can be
ordered to allow fixture to accommodate
up to 2 accessories plus one snoot or
cross baffle. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes GU6.5 TAL sockets.
F.... Mounting
Mounting clips are provided which mount
the housing edge flush with the finished
ceiling line. Mounting clips are secured to
the housing with screws.
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Next Generation
Recessed
Multi-Lamp Fixture
Four (4) Light Square
T4 GU6.5 Metal Halide
Remodel Housing
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 10.38" x 10.38"
(264mm x 264mm)
10.12"
13.91"
257mm
353mm
Thermal
Protector
COMBOLIGHT®
7.95"
202mm
1.60"
Double
Gimbal
41mm
10.75"
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
8.22"
10.75"
7.45"
273mm
189mm
Required
above
ceiling
9.29"
236mm
273mm
45º x 45º
Adjust
4.65"
118mm
8.22"
209mm
209mm
Integral Electronic Metal
Halide Ballasts
9.29"
236mm
4.65"
9.25"
118mm
9.25"
235mm
235mm
Separate Wiring
Compartment
T4 GU6.5 Lamp with Reflectors
This fixture utilizes the GE® SuperMini Constant Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
24" (610mm) flexible conduit
18" (457mm) flexible conduit
ORDERING INFORMATION
CX
Configuration
CX = COMBOLIGHT
Recessed Four (4) Light
Square
R
E
Lamp Type / Wattage Label / Reflector Type
020MCN = 20 Watt T4 GU6.5 SuperMini Narrow
020MCM = 20 Watt T4 GU6.5 SuperMini Medium
020MCW = 20 Watt T4 GU6.5 SuperMini Wide
039MCN = 39 Watt T4 GU6.5 SuperMini Narrow
039MCM = 39 Watt T4 GU6.5 SuperMini Medium
039MCW = 39 Watt T4 GU6.5 SuperMini Wide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/14/2013