DESCRIPTION
Catalog #
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes FOUR (4) CDM-TM
Project
Metal Halide (Philips® Mini Master Color) lamps in a 2x2 square configuration.
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Type
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic metal halide ballasts are
mounted in a separate metal enclosure
box attached to the junction box with
18" (457mm) of flexible conduit. Ballast
enclosure includes a separated wiring
compartment and two knockouts for
conduit entry and features a perforated
metal door for easy maintenance access
and cooler operation. Entire electrical
assembly (jbox and ballast enclosure)
is removable from the housing for easy
maintenance.
E.... Lamps
Four (4) CDM-TM Metal Halide lamps
with reflectors mounted in adjustable
double gimbal. Lamp holder is
individually removable and may be
regressed 1" (25mm) for additional cut-off.
45° x 45° locking lamp adjustment. Lamp
ring features beveled edge and lockable
accessory ring that can accept one optical
accessory. Additional media holder* can be
ordered to allow fixture to accommodate
up to 2 accessories plus one snoot or
cross baffle. Optional retractable arm is
available for lamp pulldown and extreme
aiming. Includes PGJ5 sockets.
F.... Mounting
Mounting clips are provided which mount
the housing edge flush with the finished
ceiling line. Mounting clips are secured to
the housing with screws.
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
Ceiling Cut-Out: 10.38" x 10.38"
(264mm x 264mm)
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Four (4) Light Square
CDM-TM Metal Halide
Remodel Housing
w/ 0.75" (19mm) Trim Flange
10.12"
13.91"
257mm
353mm
Thermal
Protector
7.95"
202mm
1.60"
Double
Gimbal
41mm
10.75"
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
10.75"
7.45"
273mm
189mm
Required
above
ceiling
8.22"
9.29"
236mm
273mm
45º x 45º
Adjust
4.65"
118mm
8.22"
209mm
209mm
9.29"
Integral Electronic Metal
Halide Ballasts
236mm
4.65"
9.25"
118mm
9.25"
235mm
235mm
Separate Wiring
Compartment
CDM-TM Lamp with Reflectors
This fixture utilizes the Philips® Mini Master Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
24" (610mm) flexible conduit
18" (457mm) flexible conduit
ORDERING INFORMATION
CX
Configuration
CX = COMBOLIGHT
Recessed Four (4) Light
Square
R
E
Lamp Type / Wattage Label / Reflector Type
020MMN = 20 Watt CDM-TM Mini Master Color Narrow
020MMM = 20 Watt CDM-TM Mini Master Color Medium
020MMW = 20 Watt CDM-TM Mini Master Color Wide
039MMN = 39 Watt CDM-TM Mini Master Color Narrow
039MMM = 39 Watt CDM-TM Mini Master Color Medium
039MMW = 39 Watt CDM-TM Mini Master Color Wide
Housing
R = Remodel
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/13/2013