COMBOLIGHT Catalog # Type Project

advertisement
DESCRIPTION
An adjustable Multi-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes TWO (2) CDM-TM
Metal Halide (Philips® Mini Master Color) lamps.
For new construction applications. Insulation must be kept 3" (76mm) from all
sides and at least 1" (25mm) above the housing.
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75" (19mm) flange around the ceiling
opening and to help conceal the inner
hardware of the fixture from sight
below the ceiling. Can accommodate
0.50" (13mm) to 1.25" (32mm) ceiling
thickness. Optional Chicago Plenum
configuration available.
conductors or 60º C for end of run. The
fixture is also UL listed as ‘access above
ceiling not required’.
D.... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be
configured for remote power.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
E.... Lamps
Two (2) CDM-TM Metal Halide lamps with
reflectors mounted in adjustable double
gimbals. Lamp holder is individually
removable and may be regressed
1" (25mm) for additional cut-off. 45° x 45°
locking lamp adjustment. Lamp ring
features beveled edge and lockable
C.... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply
accessory ring that can accept one
optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Includes
PGJ5 sockets.
F.... Mounting
Butterfly Brackets accept 1/2" (13mm)
EMT, C Channel, Tbar fasteners, and
bar hangers. Four tabs on housing for
securing to structure.
COMBOLIGHT®
Next Generation
Recessed
Multi-Lamp Fixture
Two (2) Light
CDM-TM Metal Halide
New Construction
Housing
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 5.44" x 10.09"
(138mm x 256mm)
21.83"
15.01"
555mm
381mm
7.45"
189mm
6.15"
10.79"
156mm
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
274mm
236mm
17.70"
450mm
9.29"
Double
Gimbal
4.65"
118mm
45º x 45º
Adjust
4.65"
118mm
CDM-TM Lamp with Reflectors
This fixture utilizes the Philips® Mini Master Color Lamp
and includes high-performance clear aluminum reflectors in
narrow, medium, or wide distributions. Non-standard color
reflectors are available upon request.
Thermal
Protector
Integral Electronic
Metal Halide Ballasts
ORDERING INFORMATION
C2
E
Configuration
C2 = COMBOLIGHT Recessed
Two (2) Light
Lamp Type / Wattage Label / Reflector Type
020MMN = 20 Watt CDM-TM Mini Master Color Narrow
020MMM = 20 Watt CDM-TM Mini Master Color Medium
020MMW = 20 Watt CDM-TM Mini Master Color Wide
039MMN = 39 Watt CDM-TM Mini Master Color Narrow
039MMM = 39 Watt CDM-TM Mini Master Color Medium
039MMW = 39 Watt CDM-TM Mini Master Color Wide
Housing
N = New Construction
C = Chicago Plenum
www.cooperlighting.com
T
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Metal Halide
Ballast
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door
/Sleeve Finish
W = White
B = Black
S = Industrial Silver
rev 05/10/2013
Download