DESCRIPTION
An adjustable Single-lamp Recessed fixture with a 0.75" (19mm) trim flange
suitable for downlighting and accent applications. Utilizes ONE (1) 12V AR70
lamp.
Catalog #
Type
Project
For remodel applications. Insulation must be kept 3" (76mm) from all sides and
at least 1" (25mm) above the housing.
Comments
Date
Prepared by
SPECIFICATION FEATURES
A.... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder
coated finish. Fixture utilizes a removable
trim sleeve to provide a 0.75" (19mm)
flange around the ceiling opening and to
help conceal the inner hardware of the
fixture from sight below the ceiling. Can
accommodate various ceiling thickness.
B.... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C.... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D.... Electrical
Integral electronic or magnetic low
voltage transformers. Transformers and
electrical are mounted in a separate
metal enclosure box attached to the
junction box with 18" (457mm) of flexible
conduit. Transformer enclosure includes
a separated wiring compartment and two
knockouts for conduit entry. Transformer
enclosure features perforated metal door
for easy maintenance access and cooler
operation. Entire electrical assembly (jbox
and transformer enclosure) is removable
from the housing for easy maintenance.
lockable accessory ring that can accept
one optical accessory. Additional media
holder* can be ordered to allow fixture
to accommodate up to 2 accessories
plus one snoot or cross baffle. Optional
retractable arm is available for lamp
pulldown and extreme aiming. Double
contact bayonet base sockets included.
E.... Lamps
One (1) 12V AR70 lamp mounted in
adjustable double gimbal. Lamp holder
is individually removable and may be
regressed 1" (25mm) for additional cutoff. 45° x 45° locking lamp adjustment.
Lamp ring features beveled edge and
G.... Labels
cULus listed for non-type IC applications,
suitable for use in damp locations.
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
F.... Mounting
Mounting clips are provided which
mount the housing edge flush with the
finished ceiling line. Mounting clips are
secured to the housing with screws.
One (1) Light
12V AR70
Remodel Housing
w/ 0.75" (19mm) Trim Flange
Ceiling Cut-Out: 5.76" x 5.76"
(146mm x 146mm)
Double
Gimbal
5.47"
9.27"
139mm
236mm
45º x 45º
Adjust
7.95"
202mm
1.60"
41mm
6.15"
156mm
4.10"
104mm
Integral Low Voltage
Transformer
*Media Holder:
White - LNC2-MH-W
Black - LNC2-MH-B
Silver - LNC2-MH-S
6.15"
7.45"
156mm
Required
above
ceiling
118mm
189mm
4.65"
4.65"
9.25"
118mm
235mm
Separate Wiring
Compartment
Thermal
Protector
NOTES:
De-Rated wattage labels are available.
12V Primary voltage is available.
18" (457mm) flexible conduit
ORDERING INFORMATION
C1
Configuration
C1 = COMBOLIGHT
Recessed One (1) Light
R
T
Lamp Type / Wattage Label
050A70 = 50 Watt max. AR70 12V
Housing
R = Remodel
www.cooperlighting.com
Power Supply
Voltage
1 = 120V
2 = 277V
4 = 240V
Power Supply
E = Electronic Low Voltage
Transformer
M = Magnetic Low Voltage
Transformer
Lamp Mechanism
G = Double Gimbal
R = Retractable Double Gimbal
Trim Flange
T = 0.75" (19mm)
Trim Flange
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Trim Finish
W = White
B = Black
S = Industrial Silver
Housing Interior/Electrical Door/Sleeve
Finish
W = White
B = Black
S = Industrial Silver
rev 05/02/2013