DESCRIPTION An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes 12V MR16 lamps. Catalog # For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing. Comments Type Project Date Prepared by SPECIFICATION FEATURES Housing All steel construction. Housing includes perforated mesh bottom surface for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes beveled “knifeedge” lip to ensure a clean edge. Housings can accommodate 0.50” or 0.625” ceiling thickness. Electrical Integral electronic or magnetic low voltage transformers. 11.5V. Dimmable*. Transformers and electrical are accessible through removable doors on the housing sidewall. Labels cULus listed for non-type IC applications, suitable for use in damp locations. COMBOLIGHT® LV SERIES Recessed Multi-Lamp Fixture Ceiling Cut-Outs CV1 = 7.00” x 7.00” Lamps CV2 = 7.00” x 11.00” One, two, three, four, five, or six 12V MR16 CV3 = 7.00” x 15.00” lamps mounted in adjustable bezels. Each lamp can accept up to two optical CV4 = 7.00” x 19.00” accessories. Special LV style lampholder CV5 = 7.00” x 23.00” with 380º x 45º locking lamp adjustment. Locking horizontal positional adjustment can CV6 = 7.00” x 27.00” be achieved for added versatility and aiming. CVX = 11.00” x 11.00” Bi-pin sockets pre-wired in housing. Snoots and spill shields included. System Protection: Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation. Junction Box Junction box is UL listed for through branch wiring, (access above ceiling not required) for 8 #12, 90°C supply conductors. J-Box integrated with housing and is accessible through the ceiling opening. 1, 2, 3, 4, 5, or 6 Light 12V MR16 New Construction Trimless Housing * Use only dimmers specifically designed for use with magnetic or electronic transformers. Low voltage Mounting Butterfly Brackets accept 1/2” EMT, C fixtures using magnetic transformers may produce Channel, Tbar fasteners, and bar hangers. audible sound when used with dimmers, which may Four tabs on housing for securing to be objectionable in acoustically critical areas. structure. E A 7.18” 182mm Dimensions in inches / mm Config. A B C D F E CV1 13.00” 10.00” 4.00” 4.00” 11.75” 10.00” 330 254 102 102 298 254 CV2 17.00” 14.00” 8.00” 4.00” 11.75” 10.00” 432 355 204 102 298 254 CV3 21.00” 18.00” 12.00” 4.00” 11.75” 10.00” 533 457 305 102 298 254 CV4 25.00” 22.00” 16.00” 4.00” 11.75” 10.00” 635 559 406 102 298 254 CV5 29.00” 26.00” 20.00” 4.00” 11.75” 10.00” 737 660 508 102 298 254 CV6 33.00” 30.00” 24.00” 4.00” 11.75” 10.00” 838 762 610 102 298 254 CVX 17.00” 14.00” 8.00” 8.00” 17.28” 14.00” 432 355 204 204 438 355 F B C 4.00” 102mm Trimless Installation D 380º x 45º Adjust + Horizontal Travel Thermal Protector Integral Low Voltage Transformers ORDERING INFORMATION N Configuration CV1 = One (1) Light CV2 = Two (2) Light CV3 = Three (3) Light CV4 = Four (4) Light CV5 = Five (5) Light CV6 = Six (6) Light CVX = Four (4) Light Sq. www.cooperlighting.com Housing N = New Construction Lamp Type / Wattage Label 037M16 = 37 Watt max. MR16 12V 042M16 = 42 Watt max. MR16 12V 050M16 = 50 Watt max. MR16 12V 071M16 = 71 Watt max. MR16 12V Power Supply E = Electronic Low Voltage Transformer M = Magnetic Low Voltage Transformer (50w max.) Power Supply Voltage 1 = 120V 2 = 277V 4 = 240V Housing Interior Finish W = White B = Black S = Industrial Silver Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-742-3838 • FAX 818-742-3801 Trim Style N = Trimless rev 052310