PORTFOLIO DESCRIPTION A low brightness 6" diameter wallwash downlight for use with A21 lamps (200W max, frosted lamps recommended). There is a 45° cutoff to lamp and lamp image in the downlight portion of the distribution. Unit provides a smooth vertical wash of light without flashback. The modular housing system supports various downlight,wallwash, and lens reflectors. Type Catalog # Project Date Comments Prepared by SPECIFICATION FEATURES A ... Reflector Patented injection molded stepped kicker reflector is vacuum metallized with hardcoat finish. Positive reflector mounting pulls trim tight to ceiling. The housing is pre-set to allow reflector to be installed at 90° increments, aligned with fixture axes. Relocation of mounting screws and use of fine adjustment mechanism enable 360° adjustment. Reflectors are clearly labeled to indicate correct orientation relative to wall(s). B ... Trim Ring Self flanged or molded white trim ring. Metal trim ring and rimless trim ring accessories available. C ... Socket Cap One piece heat dissipating die-cast aluminum. D ... Housing Precision die-cast aluminum 1-1/2" (38mm) deep collar. Optical assembly adjusts within the housing to accommodate ceilings up to 4 1/4" (108mm) thick. H ... Socket Medium base porcelain socket with nickel plated screw shell. Insulation Detector Self-resetting insulation detector opens circuit if insulation is improperly installed. E ... Universal Mounting Bracket Accepts 1/2" EMT, C Channel, T bar fasteners and hanger bars. Provides 5" total adjustment. Labels cULus listed, damp location. Options & Accessories TRM=Metal Trim Rings to replace molded trim ring. TRR=Rimless Trim Rings for minimal flange appearance in plaster ceilings. F ... Conduit Fittings Die-cast screw tight connectors. G ... Junction Box U.L. listed for four in, four out #12 at 90°C pull through branch wiring. Pry-outs for four 1/2" and two 3/4" conduits. Access to junction box by removing reflector. HD6 6711/6710 6721/6720 6731/6730 200W MAX A21 F C Optional Step Down Transformer D H 10 1/32" [262mm] SINGLE 6" WALL WASH DOWNLIGHT DOUBLE E G A Top View 5 11/16" [144mm] 6 3/8" [162mm] 7 1/4" [184mm] 13 5/8" [346mm] B CORNER NOTES: Accessories should be ordered separately. For additional options, please consult your Cooper Lighting Representative. Alzak is a registered trademark of Aluminum Company of America. 11 1/8" [282mm] ORDERING INFORMATION Sample Number: Complete unit consists of housing, ballast and trim. Housing HD6=6'' Incandescent Options CP=Chicago Plenum Trims 6711=Single WW Self Flanged Reflector 6710=Single WW, Molded Trim Ring Finish G=Specular Gold GP=Graphite GPH=Graphite Haze 6721=Double WW Self Flanged H=Semi-Specular Clear LI=Specular Clear 6720=Double WW, Molded Trim Ring W=Gloss White WH=Wheat 6731=Corner WW Self Flanged Reflector WHH=Wheat Haze WMH=Warm Haze 6730=Corner WW , Molded Trim Ring Option WF=White Painted Flanged (Self Flanged only) Derated Wattage Label DR*=DeRated, Specify Wattage Specifications and Dimensions subject to change without notice. Consult your representative for additional options and finishes. Accessories H277=Step Down Transformer, 300VA Max HB26=C Channel Bar Hangers, 26" Long, Pair HB50=C Channel Bar Hangers, 50" Long, Pair TRM6=Metal Trim Ring, Specify Finish TRR6=Rimless Trim Ring, White FK5=5 Amp Field Installable Fuse Kit 300V Max RMB-22=Wood Joist Bar Hanger, 22" Long, Pair ADV985083 09/27/2013 5:40:11 PM HD6 6711/6710, 6721/6720, 6731/6730 PHOTOMETRICS Candlepower Distribution Test No. H22249 HD6-6710C Lamp=150W A21 Inside Frosted Lumens=2850 Spacing Criteria 0°=0.6 180°=1.0 450 900 1350 Efficiency=60.5% 1800 0° Wall 180° Dwnlt 2250 Average Luminance Candlepower Deg. 0 5 15 0° Wall 1810 1363 1028 25 35 45 55 65 75 85 90 841 566 303 183 94 35 6 0 180° Dwnlt 1810 2200 1540 1310 799 150 5 2 1 0 0 8 9 10 19455 13563 8246 4198 532 289 236 0 4' 7 11 3' 10 11 22 24 22 20 19 21 23 20 17 14 11 9 7 DD 26 2' 24 26 41 42 37 29 39 42 37 30 41 42 37 29 29 27 20 14 13 15 18 16 29 27 20 14 22 16 12 9 23 17 13 10 22 16 12 9 12 10 8 7 12 10 8 7 12 10 8 7 7 8 7 5 5 5 20 Single Fixture 2'6" From Wall DD 1 2 3 4 5 6 7 8 9 10 Distance From 1' 2' 7 3 13 6 14 7 13 8 11 8 10 17 18 16 12 8 6 4 3 2 8 5 4 3 2 20 1 2 3 4 5 6 7 8 9 10 6 5 4 3 2 Fixture 3' 1 2 3 3 4 4 4 3 2 2 Along Wall 4' 5' 0 0 1 0 1 0 1 0 2 1 2 3 2 2 2 6' 0 0 0 0 0 1 1 2 1 1 0 1 1 1 1 3' Distance From Wall Spacing Between Fixtures Spacing Between Fixtures Spacing Between Fixtures 4 5 6 7 55 65 75 85 CD/SQ M 180° Dwnlt 12935 2'6" Distance From Wall 2' Distance From Wall DD 1 2 3 Deg. 45 0° Wall 26129 11 4' 10 11 22 24 22 20 22 24 22 20 19 21 23 20 22 24 22 20 17 14 12 9 17 14 11 9 17 14 11 9 17 14 12 9 17 14 11 9 8 7 7 7 7 Notes: • Illuminance values for multiple fixtures are based upon the center two units of a four unit array. Footcandle values are centerline of fixtures and centered between fixtures. • Illuminance values are cosine corrected initial values with no contribution from inter reflections from other room surfaces. Total illumination may increase from contributions from other surfaces. DD 1 2 3 4 5 6 7 8 9 10 10 18 20 18 3' 6 12 14 16 10 18 20 18 7 16 19 19 4' 6 15 18 19 7 16 19 19 15 13 11 9 16 13 11 9 15 13 11 9 19 17 14 12 19 17 15 12 19 17 14 12 8 6 7 6 8 6 10 8 10 9 10 8 Distance From Wall Spacing Between Fixtures DD=Distance Down From Ceiling • Changing fixture spacing will affect illuminance level. New Fc= Existing Spacing x Average Table Fc Level New Spacing • When selecting colored cones option, only downlight cone is colored; the wall wash reflector is natural Alzak. This allows the color (CRI, °K) of the light source to be unaffected and maximizes lumen output. CL • Illuminance in footcandles. Lux conversion factor: 1FC=10.76 LUX Specifications and Dimensions subject to change without notice. Portfolio • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 ADV985083 09/27/2013 5:40:11 PM