shaperlighting.com
DESCRIPTION
340 Farallon LED Glass Recessed Luminaire features a 4" Portfolio
Downlight with Twelve Glass options and three dimming options. New
construction.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
M a te ri a l
5mm thick, outer Cylindrical or
Splayed Borosilicate Glass*.
Available in clear, frosted or with
Shaper's exclusive sandblasted
patterns. Ground and polished
bottom edge. Optional 2.3mm
thick, Inner Fluted cylindrical
Borosilicate Glass*. Available in
clear or frosted. Ground and
polished bottom edge.
Portfolio recessed downlights are
the LD409 and LD413. Refer to
Portfolio specification sheets for
additional details. Note that Shaper
Farallon LED Glass Luminaure is
provided complete from Shaper.
Companion recessed luminaires
without glass trim are to be
ordered from Portfolio directly.
*Borosilicate Glass - Contains 5%
or more of B2O3, is highly resistant
to heat and shock with low
coefficients of expansion, which
makes it heat-resistant.
Glass Options
Splayed Glass, Polished - Clear
(SGPC), Splayed Glass, Polished Frosted (SGPF), Cylindrical Glass,
Polished - Clear (CYC), Cylindrical
Glass, Polished - Frosted (CYF),
Cylindrical Glass, Polished Frosted Division (CYF-DVN),
Cylindrical Glass, Polished Frosted Quadrate (CYF-QDE),
Cylindrical Glass, Polished Frosted Crossette (CYF-CRT),
Cylindrical Glass, Polished Frosted Catenary (CYF-CTY),
Cylindrical Glass, Polished Frosted Spangle (CYF-SGL), Glassin-a-Glass, Polished - Frosted
Inside, Frosted Outside (GIG-FIFO),
Glass-in-a-Glass, Polished Frosted Inside, Clear Outside (GIGFICO), Glass-in-a-Glass, Polished Clear Inside, Clear Outside (GIGCICO).
Note: Farallon Glass trims are
hand-cut, hand-polished and handetched. It is an artisan process. No
trims will be exactly alike and
slight glass and pattern
inconsistencies may occur.
Optics
Two-stage reflector system
produces smooth distribution with
excellent light control and low
aperture brightness. Lumen
packages include 900 and 1,300
delivered lumens with color
temperatures of 2700K, 3000K,
3500K, 4000K. Contact factory for
2,000 lumen package. Suitable for
commercial construction.
D ri ve r
1300 Lumen DMR7/DML(HO)
(Values at non-dimming line
voltage)
Minimum Starting Temp: -30°C
(-22°F). EMI/RFI: FCC Title 47 CFR,
Part 18, Class B. Input Voltage: UNV
(90V - 305V). Power Factor: >0.90
(at nominal input 120/230/240/277
VAC & 100% of Rated Ouput
Power). Input Power: 24.8W THD:
<21%. 120V Input Current: .21A
277V Input Current: .09A.
Maximum Non-IC Ambient
Continuous Input Frequency: 4763H. Rated Wattage: 24.8W
900 Lumen DMR10/DMR7/DML
(Values at non-dimming line
voltage)
Minimum Starting Temp: -30°C
(-22°F). EMI/RFI: FCC Title 47 CFR,
Part 18, Class B.
(Consumer)
Input Voltage: 120/120-305V. Power
Factor: >0.90. Input Power:
14.3W/17.5W THD: <20%. Input
Frequency: 50/60Hz. Rated Wattage:
14.3W/17.5W
LED
One (1) 14W** or 18W** (900 lm)
or 25WHO** (1,300 lm) module.
Contact factory for 2,000 lumen
package.
LED system contains a plurality of
high brightness white LEDs
combined with a high reflectance
upper reflector and convex
transitional lense producing even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto
resetting, thermally protected,
LEDs are turned off when safe
operating temperatures are
exceeded. Color variation within
3-step MacAdam ellipses. Available
in 827 = 2700° K, 830 = 3000° K,
835 = 3500° K or 840 = 4000° K, 80
CRI.
** Actual wattages: 14W = 14.3,
25W = 24.8 and 18W with DMR7 =
18.6.
Housing & Reflector: Universal
mounting bracket that accepts 1/2"
EMT, C-Channel and bar hangers
and adjusts 5" vertically from
above and below the ceiling (new
construction housing only).
Junction box with (4) 1/2" and (2)
3/4" trade size pry outs positioned
to allow straight conduit runs.
Listed for (8) #12 AWG (four in, four
out) 90°C conductors and feed thru
branch wiring. Lower reflector is
retained with two torsion springs
holding the flange tightly to the
finished ceiling surface. Driver can
be serviced from above or through
the aperture.
LED: Flexible disconnect allows for
tool-less replacement of LED
engine from below ceiling. New
construction, contact factory for
housing options.
Glass: Tool-less installation,
retained to standard wide reflector
with pre-painted white spun .040
aluminum clip.
Recessed LED Luminaire
4" Farallon
Glass Downlight
Options
Luminaire is supplied with a
dimming driver, standard. One
must be selected to complete
catalog number. LED Dimming
Driver: 10 to 100% dimming, 120277V, 50/60Hz, 0-10V (DMR7), 15 to
100% dimming, 120V, 2-wire phase
control, (900 lumen only (DMR10)
or 1 to 100% dimming, 120-277V
Lutron Hi-lume A-Series (DML).
Contact the factory for MOD
Portfolio DL options.
LED
Labels
Thermally protected and U.L. and
C.U.L. listed for damp location.
Contact factory for wet location.
IP54 Certified. EMI/RFI emissions
per FCC 47CFR Part 18 Class B
consumer limits. New contruction,
non-IC rated - Insulation must be
kept 3" from top and sides of
housing. RoHS Compliant. Title 24
2008 Compliant with designated
trims, contact factory for details.
ARRA Compliant. Photometric
testing completed in accordance
with IES LM 79 standards. LED life
testing completed in accordance
with LM 80 standards. 5 year
warranty. Fixture should not be
operated in ambient temperatures
above 40° C. Sound Rating: Class A
standards.
M o d i fi c a t i o n s
Installation
340-4 LED
DL SERIES
Contact the factory regarding glass
size, color or patterns.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ARRA
Shaper Lighting certifies that its products
satisfy the requirements of Section 1605 of
the American Recovery and Reinvestment
Act (also known as the ARRA Buy American
provision).
FARALLON
Shaper purchased the intellectual assests
of the company and is pleased to offer
a complete family of slumped glass
luminaires.
LED LED
Shaper Lighting now offers LED technology.
LED source contains a plurality of high
brightness white LEDs combined with a
high reflectance upper reflector and convex
transitional lens, producing even distribution with no pixilation. Rated for 50,000
hours at 70% lumen maintenance.
ADS111408
2011-09-12 09:48:55
shaperlighting.com
340-4 FARALLON LED RECESSED GLASS LUMINAIRE
O R D E R I N G I N F O R M AT I O N
Sample Number: 340-4-DL-LED835/1/14-120V-SCSF-ERW4-SGPC-DMR10
Series
LED
1
2
340-4-DL= Recessed 4” LED827/1/14
Dowlinght
LED827/1/18 3
3
LED827/1/25HO
2
LED830/1/14
3
LED830/1/18
3
LED830/1/25HO
LED835/1/14 2
LED835/1/18 3
LED835/1/25HO 3
2
LED840/1/14
3
LED840/1/18
3
LED840/1/25HO
Finish/Power
Module
Voltage
120V
277V
2
Options
SGPC = Splayed Glass, Polished - Clear
DML = Lutron dimming
3
DMR7 = 0-10 volt dimming
SCSF- = 4” module
DMR10 = 120 volt,
CYC = Cylindrical Glass, Polished - Clear
ERW4 for Wide
2-wire Phase
Beam, Semi2
=
Cylindrical
Glass,
Polished
Frosted
CYF
Control dimming
Specular Clear,
=
Cylindrical
Glass,
Polished
CYF-DVN
Self-Flanged
Frosted Division
Reflector
CYF-QDE = Cylindrical Glass, Polished Frosted Quadrate
SGPF = Splayed Glass, Polished - Frosted
CYF-CRT = Cylindrical Glass, Polished Frosted Crossette
CYF-CTY = Cylindrical Glass, Polished Frosted Catenary
CYF-SGL = Cylindrical Glass, Polished Frosted Spangle
GIG-FIFO = Glass-in-a-Glass, Polished Frosted Inside, Frosted Outside
Notes:
1
4
Glass Options
Refer to LED details in Specification Features (on page 1) for
actual wattages.
14W is only available with DML or DMR10 dimming.
3
18W and 25WHO are only available with DML or DMR7 dimming.
4
A dimming driver is supplied standard, one must be selected to
complete catalog number.
GIG-FICO = Glass-in-a-Glass, Polished Frosted Inside, Clear Outside
GIG-CICO = Glass-in-a-Glass, Polished Clear Inside, Clear Outside
HOUSING
5-11/16"
5-11/16"
5-11/16"
(14.5 cm)
(14.5 cm)
3"
(7.5 cm)
3"
(7.5 cm)
5-11/16" (14.5 cm)
6-1/2" (16.5 cm)
340-4-LED-SGPC or SGPF
(14.5 cm)
3"
(7.5 cm)
4-3/8" (11 cm)
5-5/8" (14.4 cm)
340-4-LED-CYC or CYF
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
2-3/8" (6 cm)
4-3/8" (11 cm)
5 5/8" (14.4 cm)
340-4-LED-GIG
ADS111408
2011-09-12 09:48:55
340-4 FARALLON LED RECESSED GLASS LUMINAIRE
shaperlighting.com
G L AS S O P T I O N S
340-4-CYC OR CYF
(CYLINDRICAL GLASS,
POLISHED - CLEAR OR FROSTED)
340-4-CYF-DVN
(CYLINDRICAL GLASS,
POLISHED - FROSTED DIVISION)
340-4-GIG-CICO
(CYLINDRICAL GLASS-IN-A-GLASS
POLISHED - CLEAR INSIDE,
CLEAR OUTSIDE)
340-4-CYF-CRT
(CYLINDRICAL GLASS,
POLISHED - FROSTED CROSSETTE)
340-4-CYF-CTY
(CYLINDRICAL GLASS,
POLISHED - FROSTED CATENARY)
340-4-CYF-SGL
340-4-CYF-QDE
(CYLINDRICAL GLASS,
POLISHED - FROSTED QUADRATE)
(CYLINDRICAL GLASS,
POLISHED - FROSTED SPANGLE)
340-4-GIG-FIFO
340-4-GIG-FICO
(CYLINDRICAL GLASS-IN-A-GLASS
POLISHED - FROSTED INSIDE,
CLEAR OUTSIDE)
(CYLINDRICAL GLASS-IN-A-GLASS
POLISHED - FROSTED INSIDE,
FROSTED OUTSIDE)
340-4-SGPC OR SGPF
(SPLAYED GLASS
POLISHED - CLEAR OR FROSTED)
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADS111408
2011-09-12 09:48:55