DESCRIPTION 4” round recessed trimless adjustable truncated cone fixture. For use with 12V MR16 lamp 71W max. For use in downlighting / accent applications. Catalog # Type Project Comments Date Prepared by SPECIFICATION FEATURES A....Housing 18 gauge CRS with flat black powder coat. Removable housing top with toolless access (new construction housing only). Adjustable trimless mud-ring can accommodate 1/2”, 5/8”, 3/4” & 1” ceiling thickness. Ceiling mudding compound is applied right to the edge of the fixture. B....System Protection: Thermally protected. Vent holes in housing. QUIET CEILING TRIMLESS C....Electrical J-box and electronic or magnetic low voltage transformer. 120V or 277V input, Junction box is rated for through branch wiring. Includes six 1/2 trade size knockouts. +/- 15º 3.00” 4.00” QCT2075 D....Mounting 4” Round Recessed Trimless Truncated Cone Fixture Butterfly Brackets and GOT NAIL hanger bars included. Perforated flaps for secure drywall installation. E....Trimless Fixture Round adjustable truncated cone trimless fixture. Includes bullet plunger retainers for smooth snap-in action. Finished in a variety of powder coat paint colors. All internal components of trim assembly are finished in matte black. Includes steel safety cable. F....Lamp For use with 12V MR16 lamp 71W max. Lamp not included. Includes clear protective glass lens. Can accept up to two (2) optical accessories. Internal rotation ring with locking adjustment. Provides 360º rotation of trim and secures original trim position after relamping. FOR 12V MR16 71W max. 12.00” to 24.00” 7.25” 11.29” Ceiling Cut-Out 5.50”dia. 9.75” G....Reflector 5.42” Integral aluminum reflector is cut at a 35º angle. Available in a variety of finishes. 17.19” Available Housings: 9.09 ” New Construction Housing (Shown) QCT900 (L=17.19” H=5.38” W=11.29”) AirTite I.C. Housing QCT902 (L=21.70” H=7.00” W=10.20”) 5.38 ” Remodel Housing QCT904 (L=16.81” H=5.37” W=9.50”) 0.5” - 1.0” Special Ceiling Housing QCT906 (L=17.19” H=5.38” W=11.29”) +/- 15º 4.00” Suitable for Damp Location TRIM ORDERING INFORMATION HOUSING ORDERING INFORMATION QCT2075 Fixture QCT2075 = 4” Round Trimless Adjustable Truncated Cone www.cooperlighting.com QCT900 Trim Face Finish WH = White BK = Black SN = Satin Nickel SS = Stainless Steel (paint) PM = Primer Reflector BH = Black Haze G = Gold GPH = Graphite Haze W = Gloss White H = Haze KH = Cognac Haze LI = Low Iridescent WMH = Warm Haze WH = Wheat MW = Matte White MS = Matte Silver Accessory LNBLVR = Hex Cell Louver LNBDSL = Diffusion Spread Lens LNBLSL = Linear Spread Lens LNBPSL = Prismatic Spread Lens LNBUVF = U.V. Filter Fixture QCT900 = New Const. Power Supply E = Electronic Xfmr. M = Magnetic Xfmr. Other Housings: QCT902 = AirTite I.C. QCT904 = Remodel QCT906 = Special Ceil. Lamp Type / Wattage 020M16 = 20 Watt MR16 12V 037M16 = 37 Watt MR16 12V 042M16 = 42 Watt MR16 12V 050M16 = 50 Watt MR16 12V 071M16 = 71 Watt MR16 12V (AirTite I.C. and Remodel housings are 50W max.) Specifications and Dimensions subject to change without notice. RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 Primary Voltage 1 = 120V 2 = 277V rev. 032309