Fail-Safe D ES C R IPTION The Fail-Safe HVSL provides style with strength. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. The HVSL is ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for stairwells, schools, hospitals, corridors, dormitories, public restrooms, common areas, and transit stations. Type Catalog # Project Date Comments Prepared by S PEC IFIC A TION FEA T U R E S Housing L e ns Lig h t-Emitting Diod e (LE D) Heavy duty, 18 ga. steel housing and end caps provide rigid construction. Stainless-steel and die-formed aluminum available. End caps provided with 7/8” knockouts for continuous row mounting. Finished in matte white standard. Optional architectural colors available. One-piece extruded UV stabilized opal polycarbonate standard. Optional clear ribbed polycarbonate.Unique linear ribbed design provides even light distribution while obscuring lamp image and direct glare. Internal ribs reduce dirt build-up and make cleaning easier. Nominal lens thickness = 0.135”. Lifetime lens warranty (see page 2 for details). LEDs available in 3000K, 3500K, 4000K and 5000K with CRI > 85. Projected life is 50,000 hours at 70% lumen maintenance. Fas t e n e r s Hex-head screws (4) secure the lens to the housing. Stainless steel TORX® with center reject pin and allen head set screws optional. Re fl e c tor Tran sfo rmer/Driver Electronic, 0-10V dimming standard. Labels ETL listed for damp locations, wall or ceiling mount. IP63 rated optional. HVSL 20 ga. CRS with white high reflectance polyester powder coat finish. Reflector serves as driver and wireway cover. LD4 LED 8", 12" Width Vandal Resistant Linear LED Steel Housing HVSL8 = 6-1/2" [166mm] HVSL12 = 9-1/2" [241mm] Polycarbonate Lens 3-5/8" [93mm] (HVSL8, HVSL12) HVSL8 = 8-19/32" [219mm] HVSL12 overall width = 12-5/8" [321mm] MOUNTING D ETA IL 4' 2-1/4" [58mm] HVSL12 HVSL8 4-1/32" 7" [178mm] [103mm] 20" [508mm] 41-1/16" [1043mm] 20" [508mm] 0.312" X 1" OBLONG 0.875" KO. (3) [22mm] 44-9/16" [1132mm] (8’ unit cnsists of (2) 4’ units, attached at the factory) ENERGY DATA For Energy Management related technical data to support the performance of this fixture series, refer to the ordering information for input wattage. PS519015EN 2016-05-03 09:35:56 H V S L - LE D ORDER ING INFOR M A TION SAMPLE NUMBERS: Product Family Number of LED Modules LED Type Length HVSL8-4-LD4-2STD-40-UNV-C-EDC1 Color Temperature Illumination Level LD4 HVSL12-4-LD4-3HI-50-UNV-O-EDC1 Voltage Lens Type Driver No. of Circuits O p t i o ns Finish UNV HVSL8=8” Wide HVSL Linear Steel 2', 4' & 8' Lengths LD4=LED, Version 4.0 HVSL12=12” Wide HVSL Linear Steel 2', 4' & 8' Lengths 1=(1) LED Module in Cross-section 2=(2) LED Modules in Cross-section 3=(3) LED Modules in Cross-section (HVSL12 only) 2=2' Length 4=4' Length 8=8' Length 2 or 30=3000 Kelvin 35=3500 Kelvin 40=4000 Kelvin 50=5000 Kelvin UNV =120-277V Blank=Matte White BK=Black DP=Dark Platinum BZ=Bronze O=Opal Smooth, Polycarbonate (no ribs) C=Clear Ribbed, Polycarbonate (ribs to inside) STD=Standard LO=Low HI=High 3 EDC_=Electronic Driver, 6 Non-Dimming EDD_=Electronic Driver, 6 0-10V Dimming, 10% 6 ED1D_=Electronic Driver, 0-10V Dimming, 1% Custom colors available. Furnish RAL number or paint manufacturer/catalog number, or color chip. Consult Technical Support for proper catalog logic. 1= 1 Circuit 2= 2 Circuits 3= 3 Circuits (HVSL12 only) Accessories (Order Separately) Notes: 1 Voltage specific 120 or 277. 2 8 ft. unit consists of (2) 4 ft. housings joined together at the factory with single 8 ft. lens. 3 Available in LO or STD only with Emergency option (2 module HVSL8 and 3 module HVSL12). 4 Not available in 2' fixture length. 5 Specify voltage. 6 Purple and gray low voltage driver lends connected to driver for EDD1, EDD2, EDD3. Not connected for EDC1, EDC2, EDC3. OS1=Integrated Motion/Occupancy Sensor (within lens) connected to 1 LED module 1 OS2=Integrated Motion/Occupancy Sensor (within lens) connected to 2 LED modules 1 OSE1=Occupancy Sensor Mounted in End External Box, Connected to One LED Module (box attached to end plate) (FS305) OSE2=Occupancy Sensor Mounted in End External Box, Connected to Two LED Modules (box attached to end plate) (FS305) OSES1=Occupancy Sensor Mounted in Side External Box, Connected to One LED Module (FS505) OSES2=Occupancy Sensor Mounted in Side External Box, Connected to Two LED Modules (FS505) EL7W=7W EM Battery Pack EL10W=10W EM Battery Pack EL14W=14W EM Battery Pack SF1=TORX® T20 Vandal Resistant Screws SHP=Stainless Steel Painted Housing SHPA=Stainless Steel Painted, all Fabricated Components ALH=Aluminum Painted Housing ALHA=Aluminum Painted, all Fabricated Components GSKLNS=Gasket to Lens - Side and Ends IP63=IP63 rated VRSD=T20 Center Pin Tamperproof TORX®-head bit NOMINA L INP UT WA T T S/D E L IV E RE D L UME NS - 3 5 00K, CLEAR LENS Fixture Length # Modules in CrossSection HVSL8 2' 1 2 15 Day Quick Ship Product QS-HVSL8 Length 4 LED LD4 # of Modules Level 1 2 LO STD HI Color Temp 35 40 50 Voltage Driver/ Opal Lens Circuits UNV O EDC1 EDC2 Option 4' EL7W 1 EL14W GLR 2 Maximum order quantity is 50 pieces 15 days from receipt of Purchase Order at Eaton Facility to shipment from Eaton Facility EL available LO and STD for 2 module QS-HVSL8 HVSL12 Example Catalog #: QS-HVSL8-4-LD4-2HI-40-UNV-O-EDC1 2' 2 3 4' 2 L e n s L i f e t i m e Wa r r a n t y Fail-Safe will repair or provide a replacement lens for any HVSL lens found to be inoperative due to physical abuse for the duration of the installation. Fail-Safe will not warranty product against some forms of anti-social human behavior involving corrosive chemicals, fire, paint or gunfire. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting 3 Illumination Level Nominal Input Watts Nominal Delivered Lumens LO 13.1 1060 STD 18.3 1455 HI 23.6 1825 LO 26.2 2150 STD 36.2 2890 HI 47.2 3575 LO 26.2 2175 STD 36.6 2915 HI 41.2 3645 LO 52.4 4300 STD 73.2 5778 HI 94.4 7166 LO 26.2 2081 STD 36.6 2795 HI 47.2 3475 LO 78.6 3017 STD 109.8 4050 HI 141.6 5040 LO 52.4 4161 STD 73.2 5614 HI 94.4 7334 LO 78.6 5721 STD 110 8120 HI 141.6 10260 • Nominal input wattage values include LED voltage, drive currents and typical driver efficiency. Refer to LM 79 data/photometric files for exact delivered lumen values and input wattage. Values in table are nominal values only. • Nominal 15% reduction in delivered lumens when using opal lens. • For 8' fixture delivered lumens, multiply 4' unit by a factor of 2. Specifications and dimensions subject to change without notice. PS519015EN 2016-05-03 09:35:56