Fail-Safe
D ES C R IPTION
The Fail-Safe FSR LED combines maximum security construction features
with energy saving technology. This recessed luminaire utilizes a onepiece overlapping door frame, security lensing and tamper-resistant
fasteners to maximize impact-resistance and prevent contraband
concealment and unauthorized fixture penetration. ETL listed for damp
locations. The FSR LED is ideal for confinement/security applications.
Suitable for use in inmate cells, psychiatric wards, secure corridors and
general population areas.
Type
Catalog #
Project
Date
Comments
Prepared by
S PEC IFIC A TION FEA T U R E S
Fas t e n e r s
D oor
LEDs
Stainless steel tamper-resistant T20
TORX® screws standard. Allenhead screws with center reject pin
optional (SF3).
One-piece, CRS door frame (12,
14, 16, or 18 ga.) with die-formed
edges and tightly closed corners
increases rigidity. Aircraft cable
secures door to housing.
LEDs available in 3500k, 4000k,
5000k with CRI > 85. Projected
life is 50,000 hours at 70% lumen
maintenance.
Housing
Lens R etention
Die-formed CRS body with
welded corners to form a onepiece housing which prevents
contraband concealment and
unauthorized fixture penetration.
Fin i s h
High gloss, electrostatically
applied, white powder coat finish,
average minimum reflectance 92%.
Gasketing surrounds door frame
and prevents light leaks.
Lens secured by thru-studs and
vertically adjustable internal CRS
hold-downs.
L e ns
Tran sfo rmer/Driver
Choice of prismatic acrylic,
prismatic polycarbonate or
prismatic tempered glass on fixture
side, clear polycarbonate or clear
tempered glass on environmental
side.
Electronic Driver, 0-10V dimming
standard.
L i ght Ma s k
ETL listed for damp locations. Wet
location under covered ceiling
optional.
H ing e
Fixture provided with (2) stainless
steel aircraft cables to attach door
to housing. Concealed piano hinge
optional.
Mounti ng
Refer to ceiling compatibility
drawing (pg. 3). Eye-bolt kit
for 4-point attachment to rigid
structure above, included standard.
FSR LED
LD4 LED
1' Width
2' Width
Confinement/Correctional
SECURITY
Recessed Grid
NOMINA L INPUT W A T T S / DE L I VE R E D L U M E N S ( 8 0 / 8 6 S HIE L D ING)
(80/86 shielding)
Fixture
Size
1' x 1'
1' x 2'
2' x 2'
Nominal
Input
Watts
Nominal
Delivered Lumens
(80/86 shielding)
Fixture
Size
Level
Nominal
Input
Watts
1
LO
26.2
1808
1
STD
36.6
2489
Level
1
STD
9.1
621
2
STD
18.3
1250
1
LO
13.1
904
1
HI
47.2
3162
1
STD
18.3
1245
2
LO
52.4
3595
1
HI
23.6
1583
2
STD
73.2
4980
2
LO
26.2
1810
2
STD
36.6
2490
3
LO
39.3
2663
3
LO
78.6
5428
3
STD
54.9
4325
3
STD
109.8
7494
3
HI
70.8
4795
3
HI
141.8
9578
4
LO
52.4
3620
4
LO
104.8
7215
4
STD
73.2
4980
4
STD
146.4
9960
1' x 4'
2' x 4'
# Modules
Nominal
Delivered
Lumens
# Modules
Nominal input wattage values include LED voltage, drive current, and typical driver efficiency. Refer to LM79 data/photometric files for exact
delivered lumen values and input wattage. Values in table are nominal values only.
PS519026EN
2016-04-26 11:55:01
FS R LE D
OR D ER ING INFOR M A TION
SAMPLE NUMBER: FSR-TG-X24-4-LD4-4STD-40-80/86-EDC1
Product
Family
Ceiling
Type
Door
Width
Length
FSR
LED
or
FSR-MP-S12-2-LD4-2LO-50-82/87-EDD1
No. of Illumination Color
Temp. Voltage
Level
LED
Inner
/
Outer
Lens
Driver
No. of
Circuits
Options
Accessories
/
LD4
FSR
UNV=120-277V
TG=T-grid 5
MP=Metal Pan 1, 4
CZ=Concealed Z-splins 5
SC=Security Ceiling 6, 7
Lens Type 3
Inner Layer
(optional)
90=0.005 UV
Absorbing
Overlay
Fixture Side
80=0.125 Prismatic
Acrylic
81=0.156 Prismatic
Polycarbonate
82=0.187 Prismatic
Polycarbonate
93=0.156 Prismatic
Tempered Glass
S=12 ga.
X=14 ga.
D=16 ga.
N=18 ga.
24 =24" Wide
12 =12" Wide
1=1' Length (1' x 1' only)
2=2' Length
4=4' Length
LD4=LED
Environmental Side 3
84=0.125 Clear
Polycarbonate
85=0.187 Clear
Polycarbonate
86=0.250 Clear
Polycarbonate
87=0.375 Clear
Polycarbonate
88=0.500 Clear
Polycarbonate
94=0.187 Clear
Tempered Glass
96=0.250 Clear
Tempered Glass
97=0.375 Clear
Tempered Glass
Driver
EDC_=Electronic Driver,
Non-dimming
EDD_=Electronic Driver,
0-10V Dimming 10%
ED1D_=Electronic Driver,
0-10V Dimming 1%
1=(1) LED Module
2=(2) LED Modules
3=(3) LED Modules (24" width only)
4=(4) LED Modules (24" width only)
STD=Standard
LO=Low
HI=High 9
Circuits
1=1 Circuit
2=2 Circuits
3=3 Circuits
35=3500K
40=4000K
50=5000K
EL10W=10W
Emergency Battery
Pack 2, 8, 10
LLNL=Linear LED
Night Light,
Dimmable
GLR=Fuse and
Holder
14G=14 Guage
Housing
CPHF=Continuous
Piano Hinge,
Full Length
WL=Wet Location
Under
Covered Ceiling
9306=AllenHead Wrench
VRSD=T20
Center Pin
Tamperproof
TORX® head
screwdriver
Mounting Options
SWBR=Swing-out
Brackets (4)
YMF=Yoke Mounting
Frame (2) 3
Stainless Steel Door
SSN=Natural Brushed
Finish
SSP=Polyester Powder
Coat Finish
Fasteners
SF3=Allen-Head (center
pin reject)
Notes:
1 For metal pan ceilings, ceiling system specifications are required to assure compatibility. Signed submittal drawings may be required.
2 EM not available 1' x 1' or 1' x 2'. May be necesary to back mount EM on 2' x 2' fixtures using a backbox, causing fixture depth to increase by 2".
3 YMF consists of (2) C-channel frames, with (4) 3-1/2" bolts and nuts. Not valid with 2x2 fixture with back box.
4 MP ships with swing-out brackets standard. For yoke mounting fram, specify YMF.
5 TG and CZ ship without swing-out brackets or yoke mounting frame. Please specify SWBR or YMF if required.
6 SC ships with swing-out brackets standard. For yoke mounting frames, specify YMF.
7 SC designed for security ceilings that consist of metal”panels”, either solid or perforated. A hole is cut in the “panel”, and
the fixture is placed above. Door frame protrudes below ceiling line, and fully conceals fixture/housing.
8 EM available with “LO” or “STD” illumination levels only.
9 24" width fixture, 4HI not available. 12" width fixture, 2HI not available.
10 Specify voltage.
11 Standard Eyebolt kit cannot be installed on a 2x2 fixture with a back box.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
PS519026EN
2016-04-26 11:55:01
FS R LE D
1 ' WID TH C R OS S -S EC TIO N DI M E N S I O N S
1' x 4'
1' x 1'
1' x 2'
9" [229mm]
8-7/8" [226mm]
4-1/4"
[108mm]
4"
[101.6mm]
4-3/4"
[121mm]
1/2"
[12.7mm]
12" [305mm]
9" [229mm]
11-7/8" [302mm]
12" [305mm]
1/2"
[12.7mm]
1/2"
[12.7mm]
1 ' WID TH TY PIC A L M OUN T I N G DE T AI L
1' x 4'
40-1/4"
[1022.35mm]
(2) 7/8"
[22.23mm]
Knockouts
1-7/8"
[47.6mm]
(2) 7/8"
[22.23mm]
Knockouts
9"
[229mm]
(2) 7/8" [22.23mm]
KNOCKOUTS
(2) 7/8" [22.23mm]
KNOCKOUTS
6-1/8"
[156mm]
1' x 2'
1' x 1'
4"
[101.6mm]
(6) 9/16" [14.3mm]
x 1” [25.4mm]
Hanger Holes
Mounting
22" [559mm]
14" [356mm]
(4) 9/16" [14.3mm]
x 1" [25.4mm]
Hanger Mounting
Holes
2"
[50.8mm]
(2) 7/8" [22.23mm]
Knockouts
(2) 7/8"
[22.23mm]
Knockouts
6-1/8"
[156mm]
C R OSS- S EC TION D IM ENSI O N S
2' x 2' / 2' x 4'
21" [533.4mm]
5" (2x2) [127mm]
4.25" (2x4) [108mm]
1/2"
[12.7mm]
21" [533.4mm]
24" [609.6mm]
2 ' WID TH TY PIC A L M OUN T I N G DE T AI L
2' x 4'
34" [865mm]
(2) 7/8" [22.23mm]
Knock Outs
2' x 2'
14"
[355.6mm]
19"
[483mm]
17 3/4”
[451mm]
14"
[355.6mm]
4"
[101.6mm]
9/16" [14.3mm] x 1" [25.4mm]
Hanger Mounting Holes
(4) 7/8" [22.23mm]
Knock Outs
2" 7/8" [22.23mm]
[50.8mm] Knockouts
7/8"
[22.23mm]
Knockouts
(6) 9/16" [14.3mm]
x 1" [25.4mm] Hanger
Mounting Holes
C EIL ING C OM PA TIB ILITY
T-Grid (TG)
Metal Pan (MP)
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Concealed Z-Spine (CZ)
Specifications and
dimensions subject to
change without notice.
Security Ceiling (SC)
PS519026EN
2016-04-26 11:55:01