FAIL-SAFE
®
DESCRIPTION
The Harmony EyeLite combines exceptional aesthetics with remarkable
strength. Die-cast, extra-heavy aluminum walls of the front/back housings
offer rugged durability and afford efficient heat dissipation. Lens is
fashioned from high-quality, tempered borosilicate glass. Linear prisms
provide an efficient forward throw and broad coverage. Performancecrafted, faceted, specular aluminum reflector maximizes efficient light
distribution. A liquid, injection-molded silicone gasket allows a tight seal
between the housing and lens assembly. EyeLite is listed for wet
locations in all mounting positions; a 9° tilt allows water runoff when
inverted.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
Application
This handsome fixture will blend
seamlessly into virtually any
unsupervised environment where
broad, low-glare light distribution
is esthetically pleasing and security
essential: shopping centers,
roadside malls, corporate building
exteriors or transportation stations.
S u r fa c e H o u s i n g
Front/back housings are precision
TruGen die-cast for superior
strength and product uniformity.
Marine-grade, low-copper-alloy
aluminum resists corrosion. Extraheavy thickness promotes
durability and assures an efficient
heat sink for internal components.
Recessed Housing
Cast housing is nominal 0.125"
thick, marine grade, low copper
alloy aluminum. Comes with
concealed cast aluminum plate to
seal regressed housing to front
lens face. Two back-box
configurations are available
depending on installation. The BB
option is for stud wall and other
combustible material applications
and comes with adjustable
brackets for 18" to 24" on center
spacing. The CP option is for
concrete pour and other noncombustible material applications
and comes with an adjustable
bracket to accommodate variable
wall thickness. A quick-connect
plug wiring system allows for easy
installation. Back box may be
shipped separately for early
installation (see RECESSED
HOUSING MOUNTING AND
ADVANCED ORDERING
INFORMATION). Wall mount only.
maintenance. Chroma lens is
molded glass, sealed with gasket.
Consult factory for colors.
Optics
Linear elevating prisms create an
IES Type-III short distribution,
providing broad coverage. Faceted,
specular aluminum reflector (94%
TR) maximizes light output.
G a s ke t s
Long-life, injection-molded silicone
gasket promotes water- and dusttight seal between housing and
front-lens assembly. 1/8-inch-thick,
closed-cell EDPM gasket facilitates
proper seal between luminaire and
mounting surface. No additional
caulking is required.
Lamp
By others.
S o cke t
HID socket is a 4KV rated porcelain
medium-base socket with a nickelplated brass screw shell. CFL
socket incorporates 26-watt
GX24q3; 32-watt GX24q3; or 42watt GX24q4 base with
stainless-steel retention clip and 2pin reject that ensures proper
lamping and lamp retention.
Fa s te n e r s
Four T20 stainless-steel TORX®
screws with center reject pin.
Screw heads are recessed into
casting to maximize tamperresistance. Sealed with a gasket,
fasteners are captive.
EF/EL/EN/ER
12" Round
Harmony
Eyelite
Compact Fluorescent
High Pressure Sodium
Metal Halide
Vandal Resistant
Finish
Finish is TGIC, textured, thermoset
polyester-powdercoat that is
applied in five-stage process at 2.0mil thickness and baked on at 400°
F. Finish is 500-hour-saltspray testrated and has an impact rating of
160 inch/pounds.
Ballast
CFL ballasts are electronic
universal voltage 120-277V, less
than 10% harmonic distortion with
minimum starting temperature of 18°C (0°F). HID ballasts are
standard HPF core & coil with
minimum starting temperatures of
-40°C (-40°F) for HPS and -30°C (20°F) for MH.
Lens
Molded, tempered, shock-resistant
borosilicate glass is 0.225 inches
thick and floats on gasket.
Dissipates heat and is unaffected
by UV light, pollution and cleaning
solutions. Relamping hook holds
lens assembly for easier
10”
254mm
12”dia.
305mm
Labels
UL/cUL listed for wet locations,
wall and ceiling.
8.875"
225mm
12 " dia.
305 mm
E N E R G Y D ATA
8“
204mm
Input Watts:
3.75" 4"
95mm 102mm
EFS-12, ERS-1 2,
ELS-12 , ENR-12
EFR-12, ERR-12,
ELR-12 , ENR-12
50W-100W HPS/MH
50W-70W HPS/MH
26W-42W CT
26W-32W CT
Electronic
(1) 26W Compact Triple 27.0 Watts
(1) 32W Compact Triple 37.0 Watts
(1) 42W Compact Triple 47.0 Watts
Surface housing shown with no side conduit taps (standard). To specify
surface housing with (3) side taps, include “SC: as option in catalog number.
TORX® is a registered trademark
of Camcar Division of Textron Inc.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
High Power Factor
(1) 50W HPS 60.0 Watts
(1) 70W HPS 95.0 Watts
(1) 100W HPS 130.0 Watts
(1) 50W MH 69.0 Watts
(1) 70W MH 94.0 Watts
(1) 100W MH 125.0 Watts
ADC041340
2011-01-07 08:45:14
EF/EL/EN/ER
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : E F S - 1 2 - 5 0 M H - D T- W H - R S M
Product Family
EFS-12=Eyelite Forward Throw
Surface, 12” Round
EFR-12=Eyelite Forward Throw 1
Recessed, 12” Round
Lamp
Wattage/
Type
Compact
Fluorescent
26CT
32CT
42CT
ELS-12=Eyelite Left Throw
Surface, 12” Round
ELR-12=Eyelite Left Throw 1
Recessed, 12” Round
HID
50MH
70MH
100MH
ERS-12=Eyelite Right Throw
Surface, 12” Round
ERR-12=Eyelite Right Throw 1
Recessed, 12” Round
ENS-12=Eyelite Narrow Throw 2
Surface, 12” Round
50HPS
70HPS 6
100HPS 6
Voltage
Color
BK=Black
Compact
WH=White
Fluorescent
DT=120/277
347=347V
HID
120V=120V
208V=208V
240V=240V
277V=277V
347V=347V
DT3 =Dual Tap
120V/277V
(wired 277)
MT =Multi Tap
120/208/240/277 3
(wired 277)
ENR-12=Eyelite Narrow Throw 1, 2
Recessed, 12” Round
Options
Back Box Application
EM =Emergency Battery Pack 4
F1 =Fuse 5, 6
L =With lamp
Recessed
Fixture only
CP=Concrete pour
recessed housing
(Non-combustible
materials only)
BB=Standard recessed
housing
(Combustible
materials only)
SC =(3) side conduit taps
7
w/plugs (top, left, right)
RSM=Rough Surface Mounting
Q =Quartz Restrike (lamp 8, 9
supplied by others)
8, 9
QS =Quartz Socket
8, 9
QLL =Quartz Lamp (100w)
Accessories
(Order
Separately)
VRSD =T20 Center-pin
tamperproof
TORX®-head bit
VRSB =T20 Center-pin
tamperproof
TORX®-head bit
Notes:
1 70W maximum all recessed fixtures. Wall mount only. Back box may be shipped
in advance - see Recessed Housing Mounting & Ordering Information.
2 Recommended for uplight.
3 Available wired voltages other than 277V, add desired voltage before MT or DT; (e.g. 120V/MT).
4 Compact fluorescent fixtures only. Surface mount fixtures require deep (HID) housing.
5 Available in semi-recessed. Specify voltage.
6 For HID specify single voltage only.
Not available with EFR/ELR/ERR/ENR.
7 SC housing includes (3) side conduit taps, and must be called out as option. Standard surface
housing is required with surface product, is identical to the SC option, but does not have side
taps, and is not called out in catalog number.
8 Not available with 50w.
9 Surface mount only. Not available recessed.
R E C E S S E D H O U S I N G M O U N T I N G A N D A DVA N C E D O R D E R I N G I N F O R M AT I O N
RECESSED SAMPLE NUMBER
O R D E R I N G I N F O R M AT I O N E X A M P L E : R e c e s s e d H o u s i n g M o u n t i n g / A d v a n c e d O r d e r i n g I n f o r m a t i o n
SHIP FIXTURE
COMPLETE
(1 LINE ITEM)
5 11/32
3 3/8
5 11/32
3 3/8
1. EFR-12-50MH-DT-BK-BB
* Specify BB for combustible material application
* Specify CP for brick or concrete pour
Center lines
to aid in
placement
4 15/32
1 7/16
SHIP BACK BOX
IN ADVANCE OF
FIXTURE
(2 LINE ITEMS)
1. EFR-12-LH-50MH-DT-BK-BB
Less Recessed Housing
1 19/32
Finished
fixtures
trim
4 1/2
2. RBB-12
Do not cut
outside of
pattern
perimeter
3 1/16
The following recessed housings may be ordered in advance :
3 1/16
Cut-out Template Dimensions Included
RBB-12-F=For Combustible (Studwall) Applications
- Fluorescent Fixtures Only
RBB-12=For Combustible (Studwall) Applications
- HID and Incandescent Fixtures Only
RCP-12=For Non-Combustible (Brick, Concrete-Pour) Applications
- HID, Fluorescent, and Incandescent Fixtures
EXAMPLE: RBB-12
WITH STUD WA LL
BRACKETS
Specifications and dimensions subject to change without notice.
Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADC041340
2011-01-07 08:45:14
EF/EL/EN/ER
P H OTO M E T R I C S
C a n d l e p owe r D i s t ri b u t i o n
100W MH
ITL#49089, Initial FC
Footcandle Multipliers
For other than 8’ mounting heights
use appropriate mulitplier value:
6'
x1.7
8’ Mounting Height
8'
x1.0
10'
x0.64
12'
x0.44
14'
x0.32
Grid in units of Mounting Height
MOUNTING OPTIONS - DIMENSIONS
SURFACE HID & COMPACT FLUORESCENT & COMPACT FLUORESCENT
With Emergency Battery Pack
J-Box Mounting
Rotationally adjustable mounting bracket is
screwed to J-Box. Fixture attaches to plate
with (2) 1/4”- 20 studs and nuts.
8.5" dia.
217mm
S u r fa c e M o u n t i n g
6 knock outs are provided in casting for
mounting directly to surface. Mounting
hardware supplied by others.
.250" dia.
Mounting K.O.
J-Box Mounting Plate
Specifications and dimensions subject to change without notice.
Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADC041340
2011-01-07 08:45:14