LM 79
line .75
LM 80
TM
INTERIOR APPLICATIONS
ASYMMETRIC
Application
io Lighting’s line series .75 is approximately .75" x .75" in cross section. UL listed for
dry locations, its low profile housing enables functional luminous intensities from “tight”
architectural details such as niches, coves and casework. Similar to halogen light sources,
LEDs are point sources that offer superior definition to three-dimensional objects and sparkle
to reflective surfaces. line .75 asymmetric is also suitable for closet applications.
series .75 is a low voltage linear accent luminaire that may be ordered in incremental
lengths that range from 6" to 72" nominal. The asymmetric beam spread is optimized for
a forward throw distribution. For details on the symmetric beam spread, see dedicated
specification sheet. Projected average rated life is 50,000 hours at 70% of lamp lumen output.
To ensure proper performance, architectural details should allow for ventilation and air flow
around the fixture. Ambient temperature surrounding the fixture shall not exceed 122˚F
(50˚C).
5-year warranty
Light Output
line series .75 is available with three lumen outputs for white light only. All values below
represent the initial raw lumens of the LED. IES format photometry of Lighting Facts labels
represent actual light output measured in lumens and candlepower. Light Output losses include
optical, thermal and power supply inefficiencies. IES LM-79 format files may be obtained
from the factory or downloaded from www.iolighting.com. All products have a CRI greater
than 80. Results are typical measurements.
>> 3-step MacAdam Binning.
Standard Output
High Output
Very High Output
Initial Lumens
2700K
3000K
3500K
4000K
.75"
(19.1 mm)
White:
White:
White:
White:
72
81
83
88
lms/ft
lms/ft
lms/ft
lms/ft
253
284
289
307
lms/ft
lms/ft
lms/ft
lms/ft
362
406
413
438
lms/ft
lms/ft
lms/ft
lms/ft
Dimensions
Power Consumption*
.75"
(19.1 mm)
1.02 w/ft
3.81 w/ft
5.08 w/ft
Non-standard color temperatures available as a custom offering at additional cost and lead-time.
* Power Consumption does not include power supply losses.
Construction
Extruded aluminum housing coupled with a patented optical assembly may not be disassembled for re-lamping. Customized acrylic optics offer very high transmissivity, UV stability
and excellent longevity. Three mounting bracket options include: surface, side surface and
field adjustable. Bracket material is composed of stainless steel for ease of installation and
removal as required.
Electrical
4'-0" 22 AWG, 300 volt rated power cords are supplied on one or both ends of the fixture
as specified. Field configurable electrical feed guards against unforseen field conditions.
For detailed information regarding daisy chain limitations, remote distance limitations, power
supply options, and dimming options consult the io website (www.iolighting.com) or an
io representative.
DRIVER REMOTE DISTANCE
7'-0" (2.1m) w/22 AWG
18'-0" (5.5m) w/18 AWG
46'-0" (14.0m) w/14 AWG
71'-0" (21.6m) w/12 AWG
Finish
Anodized aluminum finish is standard. Custom finishes may be available upon request.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089
T
847.777.3900 F 847.777.3901 E info@iolighting.com
W iolighting.com
Label references 72" line .75 asymmetric fixture in Very High
Output 3000K. Lighting Facts for additional beam spreads and
light output levels may be obtained from io Lighting.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089
T
847.777.3900 F 847.777.3901 E info@iolighting.com
W iolighting.com
V: 06_30_15
(21.4 mm)
(21.4 mm)
1.13” 1.13”
(24.4 mm)
(24.4 mm)
gree
90˚
.50” .50”
(12.6 mm)
(12.6 mm)
BEAM DIRECTION
59fc
135˚
19"
(.48 m)
BLUE
GREEN AMBER
BLUE
257
180˚
165˚
RED
150˚
GREEN
RED
High
Mid
Output
Output
Very
High
High
Output
Very High
Output
(1)
2700K White2700K0.25
White
0.25
0.69(1)(1)
0.69
0.94(1)
1.30
0.94(1)
1.30(1)
(1)
3000K White3000K0.27
White
0.27
0.73(1)(1)
0.73
1.00(1)
1.39
1.00(1)
1.39(1)
3500K White3500K0.29
White
0.29
0.78
0.78
1.06
1.54
1.06
1.54(1)
(1)
4000K White4000K0.29
White
0.29
0.78(1)(1)
0.78
1.06(1)
1.49
1.06(1)
(1)
5000K White5000K0.32
White
0.32
0.87(1)(1)
0.87
1.19(1)
1.59
1.19(1)
(1)
(1)
(1)
BEAM SPREAD
BEAM SPREAD
BACK
(1.83 m)
Left handed
endcap
0.51(2)
Standard
Mid
Output
(1)
115°
72"
ASYMMETRIC
ASYMMETRIC
BOTTOM
Right handed
endcap
AMBER
(2)(2)
(2)(2)
(2)(2)
0.51
0.30
0.51
0.51
0.30
0.53(2) CONVERSION
0.53
LIGHT OUTPUT
TABLE
Standard
Output
BOTTOMBOTTOM
BOTTOMBOTTOM
BOTTOM
115°
115°
96"
(2.44m)
58fc
220
BACK
19"
(.48 m)
33fc
44fc
BACK
120˚
BACK
41fc
110
330
BEAM DIRECTION
BEAM DIRECTION
BEAM DIRECTION
BEAM DIRECTION
105˚
CLOSET LIGHT APPLICATION
.84” .84”
(21.4 mm)
(21.4 mm)
30fc
120°
90°
.84” .84”
.50” .50”
(21.4 mm)
(21.4 mm)
(12.6 mm)
(12.6 mm)
C.P. Distribution
150°
135°
105°
.78” .78”
(19.9 mm)
(19.9 mm)
BACK
165°
Light Output / Distributions
stribution
TM
ASYMMETRIC
SHELF LIGHTING - 3000K High Output
30" 3KHO 90 Degree
line .75
1.07” 1.07”
(27.1 mm)
(27.1 mm)
(1)
27"
(.69 m)
Note: Visit www.iolighting.com or contact an
(1)
io1.49
representative for IES format photometrics.
1.59(1)
Primary Endcap Secondary Endcap End Feed
2700K S.O. 2700K
2700KS.O.
M.O. 2700K
2700KM.O.
H.O. 2700K
3000KH.O.
S.O. 3000K
3000KS.O.
M.O. 3000K
3000KM.O.
H.O. 3000K
5000KH.O.
S.O. 5000K
5000KS.O.
M.O. 5000K
5000KM.O.
H.O. 5000K H.O.
0.53
0.53
Right
back 0.51
feed
(2)
Left end feed
(2)(2)
0.30
0.51
(2)(2)
(2)(2)
0.51
0.30
Note: Electrical contractor may adjust orientation of electrical feed in the field.
0.51(2)
1.07"
(27.1 mm)
0.96”
(24.3 mm)
0.62”
(15.7 mm)
0.96”
(24.3 mm)
Dimensions
0.62”
.62"
(15.7 mm)
mm)
(15.7
0.75”
(19.1 mm)
.84"
.78”
.84”
.50”
.50" (21.4
(21.4
mm)(19.9 mm)
mm)
(12.6
mm)
(12.6 mm)
.78”
.78"
(19.9 mm)
(19.9 mm)
1
1. 03
LINE SERIES
.75 SO, HO or VHO
2. I
IC
Location
Interior
Closet
3. color
27K
White 2700K SO(1)
27KHO White 2700K HO(1)
27KVHO White 2700K VHO(1)
3K
White 3000K SO(1)
3KHO White 3000K HO(1)
3KVHO White 3000K VHO(1)
35K
White 3500K SO(1)
35KHO White 3500K HO(1)
35KVHO White 3500K VHO(1)
BOTTOM
.84”
(21.4 mm)
BEAM DIRECTION
BEAM DIRECTION
2
4K
4KHO
4KVHO
BOTTOM
CC
3
White 4000K SO(1)
White 4000K HO(1)
White 4000K VHO(1)
Custom BOTTOM
Color(2)
4
BEAM SPREAD
io
I
BACK
03
BACK
0
4. distribution
90
Asymmetric clear lens
91
Asymmetric opal
white lens
5. mounting
100
Surface
101
Side surface
102
Field adjustable
5
6
6. finish
1 115°Anodized aluminum
2 Anodized custom color
ASYMMETRIC
7. length
ACTUAL (in/mm)
01
6" (6.53"/165.86mm)
02 12" (12.22"/310.38mm)
03 18" (17.97"/456.43mm)
04 24" (23.53"/597.66mm)
05 30" (29.22"/742.18mm)
06 36" (34.97"/888.23mm)
07 42" (40.53"/1029.46mm)
08 48" (46.22"/1173.98mm)
09 54" (51.97"/1320.03mm)
10 60" (57.53"/1461.26mm)
11 66" (63.22"/1605.78mm)
12 72" (68.97"/1751.83mm)
1.07"
1.07”
(27.1
mm)
(27.1 mm)
.50"
.50”
(12.6
mm)
(12.6
mm)
115°
BOTTOM
BOTTOM
ASYMMETRIC
BOTTOM
7
BEAM DIRECTION
8
9
115°
ASYMMETRIC
11
10
8. ELECTRICAL FEED
1
One feed right end
2 One feed left end
12
Double end feed
Note: Electrical contractor may
adjust orientation of electrical feed
in the field.
10. specify driver /
DIMMING
Note: If not specified otherwise,
io will supply 100 watt drivers.
Download Power Supply
specification sheet from
www.iolighting.com.
9. voltage / dimming
1 120v
2 277v
3 120v w/dim
4 277v w/dim
5 Other (International
voltage)
11.
CE
Available upon request.
line .75 applications
youtube.com/iolighting
1. White light variance between LEDs is equal to or better than 3-step MacAdam Binning.
2. Non-standard color temperature and CRI are available. Consult factory for availability.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089
0.75”
(19.1 mm)
102 Field adjustable (io part #: SA.BK.ADJMT)
BACK
BEAM SPREAD
.50”
(12.6 mm)
0.62”
(15.7 mm)
.84”
(21.4 mm)
1.07”
101 Side
surface (io part #: SA.BK.WALL)
(27.1 mm)
.84”
.50” (21.4 mm)
(12.6 mm)
Secondary End Cap
0.75”
(19.1 mm)
BEAM DIRECTION
BEAM DIRECTION
BEAM DIRECTION
1.07" Secondary Endcap Front Feed 0.75”
(27.1 mm)
(19.1 mm)
.84”
.50”
.50” (21.4 mm)
(12.6 mm) (12.6 mm)
.84"
.84”
(21.4 mm)
(21.4
mm)
BACK
.78”
(19.9 mm)
1.09(1)
1.13”
1.07” (24.4 mm)
(27.1 mm)
BACK
.96"
0.96”
(24.3mm)
mm)
(24.3
(1)
1.09(1)
0.72
0.84”
(21.4 mm)
1.13"
1.13”
(24.4
mm)
(24.4 mm)
0.75”
(19.1 mm)
1.13”
Order Code
Left front feed
0.84”
(21.4 mm)
1.07"
1.07"
(27.1
(27.1 mm)
mm)
100 Surface (io part #: SA.BK.SURF) (24.4 mm)
Footnotes
0.75”
(19.1 mm)
Right front feed
0.84”
.84"
(21.4 mm)
(21.4mm)
io Lighting reserves the right to modify the design or performance of our products at any time.
(1)(1)
0.24
0.72
Backfeed Endcap
AMBER
Left back feed
(1)(1)
1.0
0.24
Dimensions
BLUE
GREEN AMBER
BLUE
(1)
1.0(1)
0.66
0.22
0.66(1)(1)
BEAM SPREAD
Right end feed
GREEN
RED
0.88
0.22(1)(1)
BACK
RED
0.88(1)(1)
0.57
0.19
0.57(1)(1)
Dimensions
0.19(1)
Mounting Options
Electrical Feed Options
NEW FIELD CONFIGURABLE ELECTRICAL FEED
T
847.777.3900 F 847.777.3901 E info@iolighting.com
W iolighting.com
V: 06_30_15