FAIL-SAFE ® DESCRIPTION In recessed applications where maximum endurance and low maintenance represent prime considerations, Fail-Safe's HDR will last when others don't. Its 16 ga. cold rolled steel door frame utilizes continuous vertical clamp-downs to tightly secure the refractor to the door. A prismatic polycarbonate refractor, available as a flat or dropped lens, resists all forms of impact. And, its HID or fluorescent lamp source provides low cost, evenly distributed illumination. The HDR is specifically designed for use in public access areas where vandalism may occur. Ideal for under canopy, corridors and stairway applications. Type Catalog # Project Date Comments Prepared by S P E C I F I C AT I O N F E AT U R E S Fa s te n e r s Captive, stainless steel tamperproof TORX®-head T20 screws prevent unauthorized access. Light Mask Housing Lens Die-formed 18 ga. CRS with dieformed spot welded ends. Polyester powder coat finish. Gloss: 85%; Reflectance: 93%; Hardness Minimum: 2H; Salt Spray: 500 hours. Choice of clear or prismatic, polycarbonate or tempered glass. See Lens Options. Door L e n s R e te n s i o n HPF, potted and encased ballasts standard on HID units. Copperwound NPF or HPF magnetic ballast. Electronic ballasts are available with some fluorescent lamps. One-piece 16 ga. CRS door frame with die-formed edges and tightly closed corners increases rigidity. Continuous 18 ga. "L" angles held with machine screws secure lens. Labels S o cke t UL/cUL, wet location listed, IP64 rated. copperLamp screwshell, silicone braid, 150°C. Fluorescent is polycarbonate, dedicated to correct lamp wattage. For Metal Halide, protected socket is standard, for use with "O" open-rated, protected Metal Halide lamps only. Polyurethane gasketing surrounds door frame to prevent light leaks and prohibit the entrance of environmental contaminants. Ballast Lamp By others. For use with HID and Incandescent lamps. Porcelain socket, HDR 14" Square Fluorescent High Pressure Sodium Pulse Start Metal Halide Vandal Resistant 7 5/8" [194mm] 7 1/4" [184mm] RECESSED Prismatic Polycarbonate Tempered Glass Lens IP65 Rated 5/16" [8mm] 2 5/8" [67mm] 14 1/4" [362mm] 15 3/8" [391mm] 3 1/4" [83mm] (HID Only) 16 3/8" [416mm] MOUNTING DIMENSIONS L A M P C O N F I G U R AT I O N S 14 3/4" [375mm] 6 1/2" [165mm] Wiring Compartment with (3) 7/8" [22mm] Dia. KO (H.I.D. Only) 5" [127mm] 14 3/4" [375mm] Ceiling Cutout 5 3/4” [146mm] 3 3/4” 3 3/4” [95mm] [95mm] 5” [127mm] 2 1/2” 2 1/2” [64mm] [64mm] 5" [127mm] E N E R G Y D ATA 1 3/4" [44mm] (6) 7/8" [22mm] Dia. KO (Fluorescent and Incandescent Only) For Energy Management related technical data to support the performance of this fixture series, refer to the ordering information for input wattage. Specifications and dimensions subject to change without notice. Consult your representative for additional options and finishes. ADC041541 2011-11-10 11:15:01 HDR O R D E R I N G I N F O R M AT I O N SAMPLE NUMBER: HDR-100M-277-OR-26-ALP Product Family Socket L a m p Ty p e Vo l t a g e 2 L e n s Ty p e Ballast Options Accessories (Order Separately) HDR HDR =Maximum Performance Recessed Luminaire HID Source 50S=50W HPS Mogul Base 70S=70W HPS Mogul Base 100S=100W HPS Mogul Base 150S=150W HPS Mogul Base 50M=50W MP Medium Base 5 70M=70W MP Medium Base 5 100M=100W MP Medium Base 5 OR =Open-rated 6 socket for pulse start metal halide lamps ____ = Non-applicable (HPS or not compatible with OR socket) Fluorescent Source 213 =(2) 13W Twin Tube 3 313 =(3) 13W Twin Tube 3 120 =120V 277 =277V UNV = 120-277V 226 =(2) 26W Quad Tube 326 =(3) 26W Quad Tube 26= Polycarbonate Dropped Refractor 81 =0.156 K12 Prismatic Polycarbonate 93 =0.156 Prismatic Tempered Glass 93/94 =0.156 Prismatic Tempered Glass with 0.187 Clear Tempered Glass Overlay 93/85 =0.156 Prismatic Tempered Glass with 0.187 Clear Polycarbonate Overlay 93/96 =0.156 Prismatic Tempered Glass with 0.250 Clear Tempered Glass Overlay 93/86 =0.156 Prismatic Tempered Glass with 0.250 Clear Polycarbonate Overlay 126PLT =(1) 26W Triple Tube 226PLT =(2) 26W Triple Tube 132PLT =(1) 32W Triple Tube 232PLT =(2) 32W Triple Tube 142PLT=(1) 42W Triple Tube 242PLT =(2) 42W Triple Tube NOTES: 1 For specfic electronic ballast, specify brand and catalog number. 2 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Lighting Representative for availability and ordering information. 3 If 13W fixtures are ordered with electronic ballasts, lamps will be quad tube. 4 Electronic Ballast 1 , 4 Blank=HID Ballast (Magnetic) (CFL only) EBT1 =(1) Ballast for use with Compact Fluorescent Lamp EBT2 =(2) Ballasts for use with Compact Fluorescent Lamp ALP =Aluminum Door Frame (polyester powder coat finish) GLR =Fuse and Holder QRS =Quartz Restrike System (DC bayonet base; lamp by others) QS =Quartz Socket Only (DC bayonet base) Stainless Steel Door Frames SSN =Natural brushed finish SSP =Polyester Powder Coat Finish EBP =Emergency Battery Pack 7 Compact Fluorescent electronic ballast only (EBT1/EBT2). 5 6 Open-rated socket and lamp must be used. Not applicable for HPS lamps. 7 Fluorescent lamps only. Specify wattage. VRSD = T20 Center-pin tamperproof TORX®-head bit P H OTO M E T R I C S Actual Photometrics Curve Efficiency: 64% Test results to follow Specifications and dimensions subject to change without notice. Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 ADC041541 2011-11-10 11:15:01