TYPE:
C AT A L O G # :
DESCRIPTION
S P E C I F I C AT I O N F E AT U R E S
The Sure-Lites Standard Steel
LED Exit Series provides the
ideal exits for general purpose
applications. An extensive range
of field installed accessories,
choice of faces and the variety of
possible mounting
configurations permit the
tailoring of the basic exit for
almost any application. The
Sure-Lites Steel LED Exit delivers
low energy consumption and
requires no maintenance due to
highly efficient, long life LED
lamps. Building owners
appreciate its low operating cost
and contractors benefit from its
ease of installation. Durable steel
construction, attractive styling
and high efficiency illumination
make this series compatible in
commercial, institutional and
multi-housing applications.
Electronic
Dual Voltage Input 120/277 or
120/347 VAC, 60Hz
Line-latching
SURE-LITES
Universal styles offer complete
installation flexibility with
canopy, backplate, and two
stencil faces
Solid-state Voltage Limited
Charger
Battery
Solid-state Switching
Maintenance Free, Long Life
Brownout Circuit
Low Voltage Disconnect
Full Recharge Time,
24 hrs. (max.)
Test Switch, LED Indicator Light
Code Compliance
Housing Construction
UL 924
20 gauge steel housing
Life Safety NFPA 101
Available in White housing and
stencil face; consult factory for
Black housing
NEC/OSHA
Universal pattern knockouts on
rear for direct mounting to
junction box
NOM Certified
Knockouts for chevron
directional indicators
Exit – 1 year
Canopy (where supplied) allows
ceiling or end mounting
Sealed Nickel Cadmium
SLX SERIES
Most State and Local Codes
CSA Certified
STEEL EXITS
SELF-POWERED
EMERGENCY
Warranty
LED Lamps
Battery – 15 year pro-rata (Nickel
Cadmium)
Exit Lighting
Lamp Data
AC LED: Long life LED lamps
provide uniform diffused
illumination
6 7/8" [175mm]
4 5/8"
[117mm]
2 1/4" [57mm]
DC: LED DC lamps
1 1/4" [32mm]
7 1/2" [191mm]
12 1/4" [311mm]
E N E R G Y D AT A Sealed Nickel Cadmium Battery
LED Exits - Red
Input Power:
120V = 3.8W
277V = 3.9W
347V = 4.2W
Input Current (Max.):
120V = .035A
277V = .016
347V = .014A
Power Factor:
120V = >.90
277V = >.90
347V = > .88
Wattage Ratings
SLX-70
Nickel Cadmium=3.6W for 1 1/2 hrs.
O R D E R I N G I N F O R M AT I O N
T.H.D.:
120V = <21%
277V = <21%
347V + <22%
SAMPLE NUMBER: SLX-70-RWH
SLX
7
0
Family
SLX=Steel LED
Series
7=Self-Powered with LED
Lamps
Face Options
0=Universal
Battery
Blank=No Battery
Letter
Colors
R=Red
G=Green
Housing
Finishes
WH=White
BK=Black
Accessories (Order Separately)
Pendant Kit
PK-18-BK=Black, 18" Long
PK-18-WH=White, 18" Long
Voltage
Blank=120/277 V
47=120/347V
Hang-True Pendant Kit
PK-18HTWH=White
PK-18HTBK=Black
Exit Face1
Blank=Exit Face, NOM
Certified
SAL=Salida Face, NOM
Certified (Not UL Listed)
Other Accessories
WG=Choose size of wire guard desired
from Accessories Sheet
VS=Choose polycarbonate Vandal Shield
desired from Accessories Sheet
1
COOPER LIGHTING
For use in Mexico, add the prefix MEX to the catalog number
in addition to the face description (e.g.: MEX-SLX-70-RWH).
LED Exits - Green
Input Power:
120V = 6.3W
277V = 6.5W
347V = 6.1W
Input Current (Max.):
120V = .08A
277V = .04
347V = .03A
Power Factor:
120V = >.71
277V = >.71
347V = > .77
T.H.D.:
120V = <36%
277V = <39%
347V + <39%
ADV990196
®
S L X SERIES
T E C H N I C A L D AT A
Lamps
Line-Latched
S o l i d - S t a t e Tr a n s f e r
Warranty
SLX Series Self-Powered Steel
LED Exits are offered with long
life, no maintenance LED lamps
which provide uniform diffused
illumination across the exit face.
LED lamps are provided for
emergency mode operation.
Sure-Lites’ line-latched electronic
circuitry makes installation easy
and economical. A labor efficient
AC activated load switch prevents
the lamps from turning on during
installation to a non-energized AC
circuit. Line-latching eliminates
the need for a contractor’s return
to a job site to connect the
batteries when the building’s
main power is turned on.
These exits incorporate solidstate switching which eliminates
corroded and pitted contacts or
mechanical failures associated
with relays. The switching circuit
is designed to detect a loss of AC
voltage and automatically
energizes the lamps. Upon
restoration of AC power, the
emergency lamps will switch off
and the charger will automatically
recharge the battery.
The Sure-Lites Standard Steel
LED Exit is backed by a firm one
year warranty against defects in
material and workmanship
(including lamps). Maintenance
free, long life, sealed nickel
cadmium batteries carry a fifteenyear pro-rata warranty.
Housing Construction
Exit housing is constructed of
durable 20 gauge cold rolled steel
with corrosion resistant polyester
powder coat paint finish. All exits
can be mounted and wired
through knockouts located on the
top and side. Surface mount back
panel has knockouts for direct
mounting to junction box. The
mounting canopy is made of
impact resistant thermoplastic
with complementary finish.
Stencil face exits are supplied
with knockout chevron directional
indicators for easy conversion to
directional exits. Exit stencil and
backplate install in channels in
the exit housing to eliminate light
leaks.
Solid-State Charger
Supplied with a 120/277 VAC,
voltage regulated solid-state
charger. Immediately upon
restoration of AC current after a
power failure, the charger
provides a high charge rate. The
charge circuit reacts to the
condition of the battery and alters
the rate of charge in order to
maintain peak battery capacity
and maximize battery life. Solidstate construction recharges the
battery following a power failure
in accordance with UL 924.
Lens
Brownout Circuit
Exit stencil faces are available in
White or Black finish with
knockout chevron directional
indicators.Colored diffusers are
constructed using polycarbonate
materials.
The brownout circuit on SureLites’ exits monitors the flow of
AC current to the exit and
activates the emergency lighting
system when a predetermined
reduction of AC power occurs.
This dip in voltage will cause
most ballasted fixtures to
extinguish causing loss of normal
lighting even though a total
power failure has not occurred.
Te s t S w i t c h / L E D I n d i c a t o r
Light
Conveniently located Test Switch
and Power Indicator Light allows
for manual verification of proper
operation of the transfer circuit
and emergency lamps.
Sealed Nickel Calcium
Battery
Sure-Lites sealed nickel cadmium
batteries are maintenance free
with a life expectancy of 15 years.
The sealed rechargeable nickel
cadmium battery offers high
discharge rates and stable
performance over a wide range of
temperatures. The specially
designed resealable vent
automatically controls cell
pressure, assuring safety and
reliability. This battery is best
suited for harsh ambient
temperatures because the
electrolyte is not active in the
electrochemical process.
N O T E S : See option/accessories or technical sections for additional detailed product data. Specifications and Dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX: 770.486.4801
ADV990196