Technical Data
Effective August 21, 2014
0-10V Dimming 2-Lamp Ballast
Catalog#
Prepared by
Project
Date
Comments
Type
Overview
Fifth Light’s line of 0-10V Electronic Dimming Ballasts provide
cost-effective, reliable dimming control for linear fluorescent lamps,
down to 3% for T5/T5HO and T8 lamps. These two-lamp ballasts
cover a range of lamp types and lengths installed in Eaton’s Cooper
Lighting fluorescent lighting fixtures. All of the ballasts have
programmed rapid start circuits, active power factor correction and
lamp end-of-life protection. The ballasts are compatible with a wide
variety of analog (0-10 VDC) controls and photocells.
Features
Ideal for use with 0-10V energy management systems, daylight
harvesting and local controls
Helps meet energy codes, including ASHRAE 90.1 and California
Title 24, when applied properly
Compatible with Energy-Saving and Low-Mercury Lamps
120-277V input for easy ordering and universal application
Dimming Range: 3% for T5/T5HO and T8
Programmed Rapid Start maximizes lamp life
End-of-lamp-life Shutdown circuit with Auto-reset for safe, longterm operation
Active Power-factor Correction for maximum energy savings
Built-in line voltage protection
Starts at any dimmed level without flashing
Technical Data 
0-10V Dimming 2-Lamp Ballast


August 2014
Specifications
Dimensions
(Inches/mm)
Starting
Light Output
Starting Method: Programmed Rapid-Start
Case Type a
Minimum: 0V
Maximum: 10 VDC
Lamp Crest
Factor
THD
Power Factor
Ballast Factor
Temperature
1.71
<1.7
<10%
>0.98
1.0
Minimum Dimming Temperature: 50° F (10° C)
Minimum Lamp Starting Temperature: 0° F (-18° C)
Maximum Ambient Temperature: 104° F (40° C)
Maximum Case Temperature: 167° F (75° C)
Sounding Rating Class A
Dimensions
Case A: 1.18"H x 1.71"W x 8.58"L
(30mm x43.5mm x 218mm)
Case D: 1.18”H x 1.25”W x 16.88”L
(30mm x 31.75mm x 428.75mm)
Wiring &
Wiring: Control can be wired with Class I or Class II
Mounting
Grounding: Ballast must be grounded in accordance
with national and local electrical codes
ANSI Standard C82.11, C62.41
Standards
cULus Listed (Class P, Type 1 Outdoor, Type CC)
Meets FCC CFR 47 Part 18 for EMI and RFI
Non-consumer limits
NEMA Premium Rated
No PCBs
8.58
1.18
9.50
8.90
Case Type D
16.88
16.28
1.18
.26
14.58
1.25
1.00
1.18
Wiring Diagram
Green (ground)
Red
White (neutral)
Red
Black (line)
Yellow
Ballast
Yellow
Purple (control +)
Blue
Gray (control -)
Blue
NNote:
• Use Purple (+) and Gray (-) for connection to 0-10 VDC.
• Wiring Purple and Gray together provides 3% light output.
• Capping Purple and Gray separately provides 100% light output.
2
www.coopercontrol.com
Technical Data 
0-10V Dimming 2-Lamp Ballast


August 2014
Dimming Curves
Power
120%
Light Output
Power
120%
100%
100%
80%
80%
60%
60%
40%
40%
20%
20%
0%
Light Output
0%
1
2
3
4
5
6
7
8
9
10
11
0
1
2
3
4
5
6
Control Voltage (VDC)
Control Voltage (VDC)
T5 Dimming Curve
T8 Dimming Curve
7
8
9
10
Ordering
Catalog #
Case
Type
FLT-232PSUNV010-R1-C-PK
A
FLT-228PSUNV010-R1-C-PK
D
FLT-214PSUNV010-R1-C-PK
D
Lamp Type
Lamp Watt
Lamp
Length
(FT)
Lamp
Operation
Voltage
Input
Watt
Input
Amps 120V
Input
Amps 277V
Ballast
Efficacy
Factor 120-277V
T8
32
4
57
0.489
0.210
1.54
T8
28
4
45
0.425
0.183
1.89
t8
25
3
45
0.369
0.160
1.89
T8
17
2
32
0.253
0.105
1.89
T8U
32
U
57
0.484
0.206
2.66
T8U
31
U
57
0.465
0.200
1.54
T8U
24
U
45
0.348
0.152
1.54
T8U
16
U
32
0.253
0.105
1.89
T8ES
32 (30)
4
57
0.455
0.194
2.66
T8ES
32 (25)
4
45
0.392
0.183
1.54
T5
28
4
63
0.520
0.220
1.89
T5
28
4
63
0.520
0.220
1.59/1.64
T5
21
3
47
0.400
0.170
1.59/1.64
T5ES
25
4
57
0.480
0.210
2.13/2.17
T5
14
2
32
0.270
0.120
1.75/1.80
T5
14
2
32
0.270
0.120
3.13
Series
Series
Series
120/277
120/277
120/277
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s Cooper Controls Business
203 Cooper Circle
Peachtree City, GA 30269
coopercontrol.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Publication No. ACC140049
August 21, 2014
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Dimming
Performance
3%
3%
3%