Catalog#
Project
Comments
Prepared by
Date
Type
*Rear View
The NS3-C sensor can be connected directly to the iLumin Network via CAN terminals. It features three functions: PIR motion detection, daylight measurement and an infrared (IR) receiver. All three functions may be programmed within the iLumin software according to specific user needs.
This sensor features a coverage of up to 27.8 ft (8.5m) diameter depending on installation height with PIR detection optimized for slight motion for superior performance.
The PIR feature may be set in Manual or Automatic On with a custom time-out setting.
The daylight feature is used to set light levels where daylighting is required.
In Operational Mode the infrared receiver may select Scenes, turn lighting ON/OFF and adjust levels locally with the iLumin IR
Handheld Remote (HH17IR).
The NS3-C sensor’s combined features ensure maximum energy savings as well as great flexibility for the user.
Excellent sensitivity to small movements using Quad-Pyro technology
Greater sensor stability with reduced noise susceptibility
360 degree detection area
Ceiling flush mounted for a low profile, unobtrusive installation
Compact 1.9 in (49mm) diameter size for recessed installation
Connects directly to the iLumin Network

April 2015
Mounting
Weight
Temperature
Supply
Construction
Load Data
Voltage
Standards
2 x Spring Clip
Mounting Hole Diameter:
1.6 to 1.7 in (40 to 45mm) diameter depending on ceiling material
Max Recommended Mounting Height:
11 ft (3.4m)
1.2 oz (35g)
32° F to 113° F (0° to 45° C) - non-condensing
9 - 24 VDC (Regulated)
Circular plastic housing UL94 V0 rated
10mA @ 15V
PELV
Connects directly to the iLumin Network
Controls any luminaire anywhere on the system
Occupancy and Vacancy support
Light thresholds, Scenes and time-outs programmed & adjusted at any time in software
Built-in flexbility to suit individual user requirements
The differences in the detection zone patterns are indicative of the projections of the 26 lenses with single focal point and with three optical axis. An object whose temperature differs from the background temperature and which crosses inside the detection zone will be detected.
Detection range is typically calculated at the working plane
3 ft (900mm) off the floor.
11.2 ft
(3.4m)
Ceiling Height
8.2 ft (2.5m)
6.6 ft (2m)
4.9 ft (1.5m)
3.2 ft (1m)
1.6 ft (0.5m)
-1.6 ft (-0.5m)
-3.2 ft (-1m)
-4.9 ft (-1.5m)
-6.6 ft (-2m)
-8.2 ft (-2.5m)
3.2 ft
(1m)
6.6 ft
(2m)
24.6 ft
(7.5m)
27.9 ft
(8.5m)
Open office
Meeting room
Factory production area
Small workshop
Patient room
Conference room
Storage room
School classroom
Lecture hall
Public library
Library (bookstack)
Corridor
Staircase
Foyer
Hotel lounge
Shop
Restaurant
9.8 ft
(3m)
Desk Level
8.2 ft (2.5m)
6.6 ft (2m)
4.9 ft (1.5m)
3.2 ft (1m)
-8.2 ft
(-2.5m)
-6.6 ft
(-2m)
-4.9 ft
(-1.5m)
-3.2 ft
(-1m)
1.6 ft (0.5m)
-1.6 ft
(-0.5m)
1.6 ft
(0.5m)
-1.6 ft (-0.5m)
3.2 ft
(1m)
4.9 ft
(1.5m)
6.6 ft
(2m) 8.2 ft
(2.5m)
-3.2 ft (-1m)
-4.9 ft (-1.5m)
-6.6 ft (-2m)
-8.2 ft (-2.5m)
Detection Area - Zone patterns at the optimal slight motion detection distance of 6.6 ft (2m) from sensor
2 www.coopercontrol.com

April 2015
SC120-12-UN-1P-ML-20
CRESTRON
AMX
CLV-44-RL-W-IR
HH17IR
RS485
Contact closure input
TUNGSTEN
DISCHARGE
2, 3 & 4 WIRE
FLUORESCENT
COLD CATHODE
COLOR CHANGING
FIXTURES
CLV-40-RL-W-IR CLV-44Z-RL-W-IR
SC120-06-UN-1P-ML-20
TUNGSTEN
DISCHARGE
2, 3 & 4 WIRE
FLUORESCENT
COLD CATHODE
COLOR CHANGING
FIXTURES
TSC-50-SS-NA
9 VDC
SUPPLY iCANnet
Cable type - Cooper LCCNP (NON PLENUM) OR Cooper LCCP (PLENUM) Cable or Belden™ 1502R (NON PLENUM) or 1502P (PLENUM)
Maximum segement distance of 1000m/3200ft per segment
NS3-C
Combination Sensor
Catalog #
NS3-C
Description
Recessed Combination Sensor
Ordered Separately
Catalog #
HH17IR
Description
Remote Control
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton
Lighting Systems – Controls Products
203 Cooper Circle
Peachtree City, GA 30269 coopercontrol.com
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. TD503002EN
April 21, 2015
Eaton is a registered trademark.
All other trademarks are property of their respective owners.