COOPER LIGHTING - METALUX
D es c r iption
The CR Series corridor wraparound features economy and energy
efficient performance. CR luminaires utilizes a low brightness, extruded
acrylic refractor with a heavy gauge end plate with embossed light seal
for dependable performance and good looks.
®
Type
Catalog #
Project
The CR Series is an ideal complimentary wraparound luminaire for
diverse applications requiring economical general lighting.
Date
Comments
Prepared by
Spe c ific a tion F ea t u r e s
C on s t r u c t i o n
Ele ctrica l*
Frame/Shielding
Channel and wireway cover/
reflector are die formed code
gauge prime cold rolled steel.
Numerous KOs for ease of
installation. Heavy end plates with
7/8" KO and embossed light seal.
Lampholder mounting brackets
easily installed with snap-in action.
Channel/wireway cover secured
with quarter turn fasteners.
Ballasts are CBM/ETL Class “P” and
are positively secured by mounting
bolts. Pressure lock lampholders.
UL/CUL listed. Suitable for damp
locations.
Refractor/lens is of clear 100%
virgin acrylic full thickness with
inside prisms along sides and
outside pyramidal prisms on
bottom. Lens can be hinged
from either side in a lift and
shift manner. Optional lens clip
included.
Fin ish
Multistage, iron phosphate
pretreatment ensures maximum
bonding and rust inhibitor. Lighting
grade, baked white enamel finish.
Note: Lens clips are required
in all wall applications and
recommended whenever the
fixture is subject to vibration.
CR
114T5
214T5
128T5
228T5
154T5
254T5
5-5/16" [135mm]
4-1/4" [108mm]
4-5/8"
[118mm]
6-1/8" [156mm]
2', 4' or 8' Surface
1 or 2 Lamp T5
Corridor Wrap
Mo unting D a ta
8'
3/16" [5mm]
15/64" [6mm] K.O. (4)
11/16" x 1" K.O. (2)
7/8" [23mm] K.O. (4)
Ceiling Stand-Off
Embossments
11/16"[18mm] K.O. (2)
x 3-1/4" K.O. (1)
Ground Screw Bump
4-1/4"
[108mm]
1-1/8"
[29mm]
48" [1220mm]
81" [2058mm]
89-1/2" [2274mm]
91-7/8" [2334mm]
Energy Data
96" [2439mm]
Ceiling Stand-Off Embossments
Ground Screw Bump
11/16" x 1" K.O. (1)
2'
4-1/4"
[108mm]
7/8" [22mm]
K.O. (1)
Keyhole
1-1/8"
[29mm]
8"
8"
[203mm]
8-3/4"
[222mm]
X
X=4-1/4" 6-1/8"
[108mm] [156mm]
16"
[406mm]
16"
[406mm]
16-1/2"
[419mm]
48" [1219mm]
L a m p C onfigur a ti o n s
1 LAMP
4-1/4"
[108mm]
Ground Screw Bump
Keyhole
41-1/2" [1054mm]
24" [610mm]
4-5/8" [118mm]
4'
11/16" x 1" K.O. (2)
7/8" [22mm] K.O. (4)
Ceiling Stand-Off
Embossments
Input Watts:
HB Ballast & STD Lamps
114T5 (23)
128T5 (37)
214T5 (34)
228T5 (60)
154T5 (71)
254T5 (114)
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
L if t & Shif t Re f ra ct or
2 LAMP
X
4-5/8" [118mm]
X=4-1/4"
[108mm]
Y
6-1/8"
Y=2-5/8" [156mm]
[67mm]
Easily Removed.
Hinges Either Side
(Not Recommended
For Sloped Ceiling
Applications.)
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
Safe and convenient means of
disconnecting power.
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADF111021
2014-01-31 08:26:59
CR
Order ing I nfor m a tion
SAMPLE NUMBER: CR-228T5-UNV-EBT1-U
Tandem
Blank=2'or 4' Length (1)
8T=8' Length
One Piece 8' Lens
Series
CR=Corridor Lite
Ballast Type (2)
EBT =T5 Electronic (3)
Program Rapid Start.
Total Harmonic Distortion
< 10%. Standard Ballast
Factor=1.0
Number of
Lamps (5), (6)
(Not Included)
1=1 Lamp
2=2 Lamps
Ballast/FactorType
Wattage
14T5=14W T5 (24")
28T5=28W T5 (48")
54T5=54W T5 (48")
Lens
A=Acrylic Refractor/Lens
Voltage (2)
UNV=Universal Voltage 120-277
NOTES:
(1)
Length of fixture (2' or 4') determined by lamp wattage chosen.
Products also available in non-US voltages and frequencies for international markets.
.90 and 1.15 ballast factor available for 2 or 3 14W T5 or 28W T5 lamps only.
(4)
Step Dimming ballast available for 2 or 3 14WT5 or 28W T5 lamps only.
(5)
1-Lamp step dimming ballast in a Normal Ballast factor not available. 2-Lamp ballast will
not operate 1-Lamp.
(6)
1-Lamp ballast in a High Ballast factor not available.
(2)
(3)
EBT N=T5 Electronic (3)
Program Rapid Start.
Total Harmonic Distortion
< 10%. Normal Ballast
Factor=.90
EBT H=T5 Electronic (3), (6)
Program Rapid Start.
Total Harmonic Distortion
< 10%. High Ballast
Factor=1.15
EBT NDIM=T5 Electronic (4), (5)
Program Rapid Start.
Total Harmonic
Distortion < 10%. Step
Dimming, Normal
Ballast Factor=.95-1.0
EBT HDIM=T5 Electronic (4)
Program Rapid Start.
Total Harmonic
Distortion < 10%. Step
Dimming, High
Ballast Factor=1.15
Packaging
U=Unit Pack
ACCESSORIES
(Order Separately)
SCF=Fixed Stem Set (Specify Length)
SCS=Swivel Stem Set (Specify Length)
SCA=Adjustable 48" Stem Set
A1B/Spacer-U=Spacer 1-1/2" to 2-1/2"
from ceiling (Use 2 per fixture)
HBAYC-CHAIN/SET/U=(2) V-Hook Hanger,
36" Chain Sets w/S-Hooks
GRP-SSF=Gripper Hanger (Use 2 Per Fixture)
Additional Accessories Available. See Options
and Accessories Section.
Number of Ballasts
1=1 Ballast
2=2 Ballasts
SH IPPING D ATA
Catalog No.
CR-128T5A
8TCR-128T5A
CR-228T5A
8TCR-228T5A
Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 468.4801
Wt.
14 lbs.
24 lbs.
16 lbs.
26 lbs.
ADF111021
2014-01-31 08:26:59