Fail-Safe
D ES C R IPTION
The Fail-Safe Harmony VR Linear provides exceptional aesthetics
with remarkable strength. Fail-Safe's LED linear model options and
connection configurations offer unmatched versatility for a wide range of
applications. Die-cast end caps, heavy extruded aluminum body provides
strength and rigidity for complex environments while an extruded linear
ribbed polycarbonate lens obscures the lamp image and spreads light
evenly. The Harmony VR Linear is ideal for areas where the need for
aesthetics and protection from vandalism are critical. Perfect for schools,
hospitals, corridors, dormitories, public restrooms, common areas, and
transit stations.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
H ou s i n g
L e ns
Lig h t-Emitting Diod e (LE D)
Heavy duty extruded aluminum
rails and die-cast end caps provide
rigid construction. Smooth end
caps provided with internal 7/8"
knockouts. Finished in white
standard. Optional architectural
colors available.
One-piece extruded UV stabilized
polycarbonate. Unique linear
ribbed design provides even light
distribution while obscuring lamp
image and direct glare. Internal
ribs reduce dirt build-up and make
cleaning easier. Nominal thickness
0.135”.
LEDs available in 3000K, 3500K,
4000K and 5000K with CRI > 85.
Projected life is 50,000 hours at
70% lumen maintenance.
Re fl e c tor
Labels
20 ga. CRS with white high
reflectance polyester powder coat
finish. Reflector serves as driver
and wireway cover.
ETL listed for wet locations under
covered ceiling standard.
Tran sfo rmer/Driver
Electronic, 0-10V dimming
standard.
Fa s t e n e r s
Stainless steel TORX® with center
reject pin and allen head set screws
provided. Screw heads are side
mounted and concealed under
lens.
HVL LED
LD4 LED
8", 12"
Individual / Continuous
Vandal Resistant Linear LED
HVL8
7-3/4" [196mm]
Polycarbonate Lens
3-19/32"
[92mm]
8-19/32" [219mm]
HVL12
11-11/16" [297mm]
3-9/16"
[91mm]
12-5/8" [320mm]
ENERGY DATA
OV ER A LL LENGTH D I M E N S I O N S
For Energy Management related technical
data to support the performance of
this fixture series, refer to the ordering
information for input wattage.
Overall Length
1'
Smooth
End Caps
13.80"
Decorative
End Caps
15.6"
2'
4'
25.20"
47.10"
27.0"
48.9"
8'
94.17"
95.97"
PS519017EN
2016-04-01 16:06:12
H V L - LE D LD4
ORDER ING INFOR M A TION
SAMPLE NUMBER:
I N D I V I D U A L : H V L 8 - 4 - L D 4 - 2 H I - 4 0 - UNV-O-EDD1;
Row/Node
Configuration
Product
Family
Length
LED
Type
No. of
LEDs
C O N T I N U O U S : H V L 1 2 - B R - 8 - L D 4 - 2 L O - 4 0 - UNV-O-EDC1
Color
Illumination
Temperature
Level
Voltage
Lens
Type
No.of
Driver Circuits
End
Caps
Options
Finish
LD4
LD4=LED
Version 4.0
HVL8=8" Harmony
VR Linear
HVL12=12" Harmony
VR Linear
30=3000 Kelvin
35=3500 Kelvin
40=4000 Kelvin
50=5000 Kelvin
1=(1) LED Module
in Cross-section
2=(2) LED Modules
in Cross-section
3=(3) LED Modules
in Cross-section
(HVL12 only)
Individual
Leave blank
Continuous Run
BR=Beginning of run 1
MR=Middle of run 1
ER=End of run 1
UNV=120 - 277V
Accessories
(Order Separately)
O=Opal Smooth (no ribs), Polycarbonate
C=Clear Lens, ribbed, Polycarbonate
EDC_= Electronic Driver,
Non-Dimming
EDD_= Electronic Driver,
0-10v Dimming 10%
ED1D_= Electronic Driver,
0-10v Dimming 1%
STD=Standard
LO=Low
HI=High
1=1' Length 6
2=2' Length
4=4' Length
8=8' Length
1= 1 Circuit
2= 2 Circuits
3= 3 Circuits
4= 4 Circuits
D=Decorative,
End Caps, Sculpted
S=Smooth
End Caps, Flat
VRSD=T20 Center Pin Tamperproof
TORX®-head bit
HVL8CB=Connector band, necessary
for continuous run (HVL8)
HVL12CB=Connector band, necessary
for continuous run (HVL12)
2
PM = Pendant Mount
NSF =Certified NSF Rating for Food Industry
TILW =Tandem In-Line Wiring (8' fixture only)
PI1BLK-6PP-WG =Single circuit harness, hot conductor black and white neutral
connected to driver(s), with ground 4, 5
PI2BLK-6PP-WG =Dual circuit harness, hot black conductor and white neutral
connected to driver(s), with ground 4, 5
PI2BLU-6PP-WG =Dual circuit harness, hot blue conductor and white neutral
connected to driver(s), with ground 4, 5
IB/OB = Inboard/outboard wiring (only necessary for 8T)
OS1 = Integrated Motion/Occupancy Sensor (within lens)
connected to 1 LED module. Voltage specific 3
OS2 = Integrated Motion/Occupancy Sensor (within lens)
connected to 2 LED modules. Voltage specific 3
EL7W = 7W Emergency Battery Pack 7
EL10W = 10W Emergency Battery Pack 7
EL14W = 14W Emergency Battery Pack 7
IP64 = IP64 compliant (water: 2.6 GPM, 11.6 PSI minimum, spray all directions, 20 minutes.
Dust: no internal accumulation, 20 minutes in dust chamber)
Notes:
1
Continuous run fixtures require (1) HVL8CB or (1)
HVL12CB connector band between each fixture.
2 Stems must be ordered separately. Not available
wet location under covered ceiling. IP64 not available.
3 Two module cross-section max with OS option.
Voltage specific 120 or 277.
4 Consult factory for additional configurations.
5 Black conductor connected to outboard lamp default at factory with inboard/outboard wiring.
6 0-10V dimming standard, except 1 ft. unit.
7 Consult factory for manufacturer/catalog number
of EM pack. Not available in 1 ft. or 2 ft. length.
NAT=Natatorium Finish, Aluminum Components, Stainless steel Hardware
NOMINA L INPUT W A TTS /N O M I N AL DE L I VE R E D L U M E N S
Number
of
Modules
Blank=Architectural White
BK=Architectural Black
DP=Dark Platinum
Illumination
Level
Input
Watts
Delivered
Lumens
CLEAR
LPW
Delivered
Lumens
OPAL
LPW
HVL8-4 Clear and Opal Lens
1
LO
24.1
2621
108.76
2339
97.05
1
STD
34.3
3495
101.90
3117
90.87
1
HI
45.3
4271
94.28
3819
84.30
2
LO
47.6
5054
106.18
4578
96.18
2
STD
70.8
6822
96.36
6145
87.04
2
HI
91.9
8224
89.49
7435
80.90
Number
of
Modules
Illumination
Level
Input
Watts
Delivered
Lumens
CLEAR
LPW
Delivered
Lumens
OPAL
LPW
ORD E RING INF ORMA T ION E X A MP L E : ( 3 ) 8 ' F IX T URE S, 24' RUN
( 1 ) H V L 8 - B R - 8 - L D 4 - 2 S T D - 4 0 - UNV-O-ED
( 1 ) H V L 8 - M R - 8 - L D 4 - 2 S T D - 4 0 - UNV-O-ED
( 1 ) H V L 8 - E R - 8 - L D 4 - 2 S T D - 4 0 - UNV-O-ED
(2) HVL8CB
HVL12-4 Clear and Opal Lens
2
LO
48.1
5098
105.99
4520
93.97
2
STD
71.4
6911
96.79
6142
86.14
2
HI
92.8
8413
90.66
7472
80.60
3
LO
72.1
7598
105.38
6736
93.43
3
STD
105.1
10204
97.09
9056
86.00
3
HI
137.5
12350
89.82
11005
79.86
* Nominal input wattage values include LED voltage,
drive current, and typical driver efficiency. Refer to
LM79 data/photometric files for exact delivered
lumen and input wattage values. Values in table are
nominal values only.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
L e n s L i f e t i m e Wa r r a n t y
Fail-Safe will provide a replacement lens for any HVL lens found to be inoperative
due to physical abuse for the duration of the installation. This warranty is only
valid to proper installation of the luminaire, using the four-point mounting method
for all luminaires. Furthermore, Fail-Safe cannot warranty product against some
forms of anti-social human behavior involving corrosive chemicals, fire, paint or
gunfire.
Specifications and
dimensions subject to
change without notice.
PS519017EN
2016-04-01 16:06:12
H V L - LE D LD4
C ONNECTOR S A ND A C C E S S O R I E S
CONNECTOR SPECIFICATIONS -
(See Accessories Specification Sheet ADC050454 for detailed specifications and dimensions.)
CONNECTOR BANDS
Connector bands are required for continuous row mount installations.
HVL8CB= 8” Connector Band
8” CORNER MOUNT BRACKET
HVL12CB= 12” Connector Band
1
HVL8-2T5CM = 8”, 2Ft. T5 Corner Mount
HVL8-2T8CM = 8”, 2Ft. T8 Corner Mount
HVL8-2LEDCM = 8”, 2Ft. LED Corner Mount
HVL8-4T5CM = 8”, 4Ft. T5 Corner Mount
HVL8-4T8CM = 8”, 4Ft. T8 Corner Mount
HVL8-4LEDCM = 8”, 4Ft. LED Corner Mount
Note: 1 Requires 90-degree offset 1/4” driver and VRSB bit for installation.
12” CORNER MOUNT BRACKET
1
HVL12-2T5CM = 12”, 2Ft. T5 Corner Mount
HVL12-2T8CM = 12”, 2Ft. T8 Corner Mount
HVL12-2LEDCM = 12”, 2Ft. LED Corner Mount
HVL12-4T5CM = 12”, 4Ft. T5 Corner Mount
HVL12-4T8CM = 12”, 4Ft. T8 Corner Mount
HVL12-4LEDCM = 12”, 4Ft. LED Corner Mount
Note: 1 Requires 90-degree offset 1/4” driver and VRSB bit for installation.
PENDANT MOUNT: Suspension Sets - Stem Sets
XX = Length ( 6, 8, 12, 24, 36, 48, 60, 72)
SCF-XX-B = Fixed Stem Set
Used with all surface fixtures as stem sets. One set consists of one stem assembly. Minimum of two sets required per
fixture. Not rated WL under covered ceiling.
NOTE: Coupler, 3/8” IPS Pipe Coupler to join lengths. Coupler is standard baked white enamel or special
order of black. Must specify pendant mount (PM) option on luminaire.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
PS519017EN
2016-04-01 16:06:12