EMERGENCY LIGHTING - COMMERCIAL FEATURES •Dual voltage input 120/277 VAC, 60Hz •Line-latching, solid state voltage and current limited charger •Brownout circuit, low voltage disconnect and short circuit protection •Push-in AC power connectors facilitate installation •Designer white, textured finish standard; black finish optional •Injection molded components •Components have snap-fit construction •Cutouts provided in housing for surface conduit attachment •Sealed, maintenance-free, long-life lead calcium battery Compliances may not apply to all product configurations. Please consult the product spec sheet for compliance details. COMPLIANCES: UL924 Listed; NFPA 101 Compliant PC2 POLYCARBONATE EMERGENCY LIGHT ORDERING INFORMATION - NATIONAL Family Capacity in Watts (Hours) 1.5 2 3 4 Number Watts per of Heads Head Max Remote Heads Lamp Type Specify Housing for all Models 6 VOLT PC2-10 10.8 7.2 – – 2 5.4 – Incandescent WH White PC2-27 27 24 18 14 2 9 2 Incandescent WH White OPTIONS AND ACCESSORIES Options: Add to catalog number Description Code Black BLK Voltmeter* V Ammeter* A Accessories: Add to catalog number Description Code Wire Guards (consult factory) WG-1 * Units may NOT be equipped with a voltmeter and ammeter at the same time. 13" [330mm] 4-3/4" [121mm] ATLITE 5-1/2" [140mm] Specifications and dimensions subject to change without notice. Consult your Cooper Lighting Representative or visit www.cooperlighting.com for available options, accessories and ordering information. 20-23 Product Selection Guide | Sixth Edition | www.cooperlighting.com