8
5
6
7
4
THREADED INSERT
15303-3 # 10-32 INSERT
15304-4 M5 X 0.8 INSERT
84.5
3.33
75.0
2.95
D
2
3
CONFIDENTIAL -
COPYRIGHT
The Information contained in this document is the property of Cooper
Industries, Inc. It is not for public disclosure. Possesion of the Information
does not convey any right to loan, sell, or disclose the Information.
Unauthorized reproduction or use of the Information is Prohibited. This
document is to be returned to Cooper Industries, Inc, upon completion of the
purpose for which it is loaned or upon request.
This is an unpublished work. The disclosure of this work is limited to a
select personnel. Futher dissemination or disclosure to the public is
PROHIBITED.
This unpublished work is protected by Federal Copyright Law and all
rights thereunder are reserved by Cooper Industries, Inc.
REV#
60.3
2.37
34.6
1.36
112.8
4.44
90.8
3.57
C
GORE AUTOMOTIVE
VENT USED WITH
FUSE COVER ONLY
Cooper Industries, Inc.
DESCRIPTION
DATE
APPR
0
RELEASED TO SALES
ECN U03372
REK
12-15
2003
REK
1
PART NUMBER 15301 WAS 15715
ECN U04008
REK
01-14
2004
REK
2
ADDED SHEET NO.2: MOVED NOTES SHEET NO.2: REVISED NOTES.
ECN U04284
REK
08-25
2004
REK
3
ADDED SHEET 3 SHOWING BOTTOM VIEWS OF ALL TYPES OF BASES;
REMOVED NOT AVAILABLE FOR PART NO`S 15301-4-X-X AND
15301-5-X-X, ADDED 15301-6-X-X-X, ECN JO5142 REK
04-06
2005
REK
4
REVISED HARDWARE OPTIONS IN PART NAMINS SCHEME.
ECN U05095
REK
06-09
2005
REK
5
DRAWING NO. 1530X-X-X-XX-SALES WAS 15301-X-X-X-SALES, ADDED
METRIC INSERT OPTION - ECN J05368
REK
09-07
2005
REK
6
UPDATED DRAWING TO SHOW NEW COVER AND BASE
ECN U06145
REK
08-31
2006
REK
7
ADDED RECOMMENDED CUTOUT TO SHEET 2
ECN U06180
REK
11-08
2006
8
REMOVED 86.0 [3.39] ADDED 84.5 [3.33], 60.7 [2.39] WAS
60.3 [2.37] ADDED TOLERANCE OF +0.5/-0.3[+.02/-.01] TO
112.8[4.44] AND 90.6 [3.57]
ECN BU-J09595
KF
01-14
2010
9
REDRAWN TO SOLIDWORKS AND M6 TORQUE WAS 75 IN-LBS.
BU-U12202 A.L
05-17
2012
10
UPDATED MODEL TO SHOW ADDED RIB ON THE COVER TETHER AND
NOTE. BU-U13103 A.L
03-18
2013
D
C
RELAY/C.B. COVER SHOWN
FUSE COVER SHOWN
B
1
B
1530X - X - X - X - X
SPECIAL LABELS
CONSULT FACTORY
0 - NO COVER
3 - FUSE COVER
4 - RELAY/C.B. COVER
0 - NO NUTS
1 - NUTS (SHIPPED BULK)
2 - NUTS (SHIPPED ASSEMBLED)
3 - STUD CAPS (SHIPPED BULK)
4 - STUD CAPS (SHIPPED ASSEMBLED)
5 - NUTS AND STUD CAPS (SHIPPED BULK)
6 - NUTS AND STUD CAPS (SHIPPED ASSEMBLED)
A
NOTE: RELAY BASE BUSSED IS ON PIN 86.
TOLERANCES
UNLESS OTHERWISE SPECIFIED
METRIC (mm)
TRANSPORTATION
1 PL DEC.=
2 PL DEC.=
.25
.13
THIRD ANGLE PROJECTION
ENGLISH (in)
2 PL DEC.= .01
3 PL DEC.= .005
ANGULAR TOL=
2
1
FRACTIONAL TOL = 64IN
1 - FUSE/C.B. BASE (FOR 20 FUSE/C.B) (SEE FIGURE 1, SHEET 3)
2 - MICRO RELAY BASE (FOR 5 MICRO RELAYS W/ 10 FUSES/C.B) (SEE FIGURE 2, SHEET 3)
3 - MINI RELAY BASE (FOR 3 MINI RELAYS W/10 FUSES/C.B. ) (SEE FIGURE 2, SHEET 3)
4 - WIRED BASE (NON BUSSED) (NO INPUT STUDS) (FOR FUSES /C.B AND RELAYS) (SEE FIGURE 3, SHEET3)
5 - WIRED BASE (INPUT STUD FUSE SIDE ONLY) (FOR FUSES /C.B AND RELAYS) (SEE FIGURE 4, SHEET3)
6 - WIRED BASE (INPUT STUD RELAY SIDE ONLY) (FOR FUSES /C.B AND RELAYS) (SEE FIGURE 5, SHEET3)
A
3 - # 10-32 INSERT (ENGLISH)
4 - M5X0.8 INSERT (METRIC)
CAPSULE AROUND DIMENSION
INDICATES INCOMING INSPECTION
REQUIRED
INDICATES CRITICAL CHARACTERISTIC
(MUST MEET CPK REQUIREMENTS)
Plant Code:
J
Design Units
Metric [English]
For change history please consult the
Bussmann Engineering Change Notice
number listed below.
BU-U13103
TITLE
DATE
RTMR SALES DRAWING
SHEET
1 OF 3
SCALE
0.500
REVISION.VERSION
7
6
5
4
3
DRAWN BY
R. E. KRISS
PART NO.
1530X-X-X-X-SALES
10
REV 3/08 - Size C
8
14-Aug-06
2
Ref. Name: 1530X-X-X-X-SALES
CBT B-Size
1
8
5
6
7
4
2
3
CONFIDENTIAL -
COPYRIGHT
The Information contained in this document is the property of Cooper
Industries, Inc. It is not for public disclosure. Possesion of the Information
does not convey any right to loan, sell, or disclose the Information.
Unauthorized reproduction or use of the Information is Prohibited. This
document is to be returned to Cooper Industries, Inc, upon completion of the
purpose for which it is loaned or upon request.
This is an unpublished work. The disclosure of this work is limited to a
select personnel. Futher dissemination or disclosure to the public is
PROHIBITED.
This unpublished work is protected by Federal Copyright Law and all
rights thereunder are reserved by Cooper Industries, Inc.
REV#
10
D
DESCRIPTION
Cooper Industries, Inc.
DATE
SEE SHEET 1 FOR REVISION NOTES
TANGLESS FEMALE TERMINAL
DELPHI PACKARD
280 METRI-PACK SERIES
12GA. TO 20GA.
(SEE NOTE 1)
APPVR
03-18
2013
D
74.3
2.93
63.8
2.51
5.6
.22
TYP.
CABLE SEAL
DELPHI PACKARD
280 METRI-PACK SERIES
(SEE NOTE 1)
SEE CONNECTOR PLUG
DELPHI PACKARK
PART NO. 12010300
(SEE NOTE 1)
C
1
31.9
1.26
C
R3.0
.12
TYP.
106.8
4.21
STUD CAPS
(OPTIONAL)
HEX NUTS
(OPTIONAL)
90.6
3.57
32.4
1.27
B
45.3
1.78
37.2
1.47
A
TOLERANCES
UNLESS OTHERWISE SPECIFIED
METRIC (mm)
TRANSPORTATION
53.4
2.10
NOTES:
1. OUTPUT TERMINALS, CABLE SEALS AND SEALED CONNECTOR
PLUGS ARE NOT PROVIDED BY COOPER BUSSMANN.
2. MOUNTING: THREADED INSERTS (#10-32 UNF) or (M5 X 0.8)
24 IN/LBS MAX TORQUE. INPUT STUDS M6 X 1 50 IN/LBS. MAX.
3. HOUSING: 94VO THERMOPLASTIC.
4. INTERNAL BUSSING: TIN PLATED COPPER.
5. DIMESIONS PROVIDED ARE FOR REFERENCE ONLY.
6. IP RATING: IP67 PER IEC 529. VALID WHEN COVER AND SEALED
TERMINALS AND SEALED CONNECTOR PLUGS ARE PROPERLY
INSTALLED). IN ORDER TO MAINTAIN A IP67 RATING IT IS
RECOMMENDED THAT THE CUSTOMER PERIODICALLY APPLY A
HEAVY DUTY SILICONE LUBRICANT (i.e: CRC # 05074 OR EQUAL)
TO THE RTMR HOUSING GASKET.
7. TERMINAL REMOVAL TOOL: DELPHI PART NO.12094430
ISOMETRIC VIEW
SCALE: 1:1
1 PL DEC.=
2 PL DEC.=
.25
.13
THIRD ANGLE PROJECTION
ENGLISH (in)
2 PL DEC.= .01
3 PL DEC.= .005
ANGULAR TOL=
2
1
FRACTIONAL TOL = 64IN
CAPSULE AROUND DIMENSION
INDICATES INCOMING INSPECTION
REQUIRED
INDICATES CRITICAL CHARACTERISTIC
(MUST MEET CPK REQUIREMENTS)
Plant Code:
37.5
1.48
75.0
2.95
A
RECOMENDED CUTOUT SIZE
TITLE
J
Design Units
For change history please consult the
Bussmann Engineering Change Notice
number listed below.
Metric [English]
BU-U13103
DATE
RTMR SALES DRAWING
SHEET
2 OF 3
SCALE
0.500
REVISION.VERSION
7
6
5
4
3
23-Aug-06
DRAWN BY
R. E. KRISS
PART NO.
1530X-X-X-X-SALES
10
REV 3/08 - Size C
8
B
2
Ref. Name: 1530X-X-X-X-SALES
CBT B-Size
1
8
6
7
5
4
2
3
CONFIDENTIAL -
COPYRIGHT
The Information contained in this document is the property of Cooper
Industries, Inc. It is not for public disclosure. Possesion of the Information
does not convey any right to loan, sell, or disclose the Information.
Unauthorized reproduction or use of the Information is Prohibited. This
document is to be returned to Cooper Industries, Inc, upon completion of the
purpose for which it is loaned or upon request.
This is an unpublished work. The disclosure of this work is limited to a
select personnel. Futher dissemination or disclosure to the public is
PROHIBITED.
This unpublished work is protected by Federal Copyright Law and all
rights thereunder are reserved by Cooper Industries, Inc.
REV #
D
10
FIGURE 1
FIGURE 2
FIGURE 3
1
Cooper Industries, Inc.
DESCRIPTION
DATE APPR
03-18
2013
SEE SHEET 1 FOR REVISION NOTES
FIGURE 4
D
FIGURE 5
C
C
B
B
BOTTOM VIEW
1530X-1-X-X
FUSE BASE
BOTTOM VIEW
1530X-2-X-X
1530X-3-X-X
MICRO/MINI BASE
BOTTOM VIEW
1530X-4-X-X
WIRED BASE
(NO POWER BUSS)
BOTTOM VIEW
1530X-5-X-X
WIRED BASE
(FUSE SIDE BUSS)
BOTTOM VIEW
1530X-6-X-X
WIRED BASE
(RELAY SIDE BUSS)
A
A
TOLERANCES
UNLESS OTHERWISE SPECIFIED
METRIC (mm)
TRANSPORTATION
1 PL DEC.=
2 PL DEC.=
.25
.13
THIRD ANGLE PROJECTION
ENGLISH (in)
2 PL DEC.= .01
3 PL DEC.= .005
ANGULAR TOL=
2
1
FRACTIONAL TOL = 64IN
CAPSULE AROUND DIMENSION
INDICATES INCOMING INSPECTION
REQUIRED
INDICATES CRITICAL CHARACTERISTIC
(MUST MEET CPK REQUIREMENTS)
Plant Code:
J
Design Units
Metric [English]
For change history please consult the
Bussmann Engineering Change Notice
number listed below.
BU-U13103
TITLE
DATE
RTMR SALES DRAWING
SHEET
3 OF 3
SCALE
0.500
REVISION.VERSION
7
6
5
4
3
DRAWN BY
R. E. Kriss
PART NO.
1530X-X-X-X-SALES
10
REV 3/08 - Size C
8
12-Oct-04
2
Ref. Name: 1530X-X-X-X-SALES
CBT B-Size
1