Eaton's Crouse-Hinds Division
Products
& solutions
for power generation
Use less
to produce more.
Energy saving, rugged products
to increase plant efficiency and
eliminate downtime.
2
EATON'S CROUSE-HINDS Solutions for power generation
Product solutions
engineered for power generation
LED lighting
Plugs & receptacles
Maintenance-free and
energy-efficient
Simple and secure powering
solutions
The broadest portfolio of LED
luminaires for any industrial or
hazardous application. Complete
line of HID and fluorescent
luminaires also available.
Extensive configurations,
custom capabilities and
numerous interlocked designs
provide safe and reliable
solutions for fixed and portable
power applications in industrial
and hazardous environments.
Conduit & cable fittings
Enclosures
Rugged connectors for
extreme conditions
Performance and reliability
Time-tested, innovative conduit
fittings, cord connectors and
cable glands move power where
you need it simply and safely in
any electrical installation.
Motor control & power
distribution
Flexible and modular solutions
Innovative, intelligent NEC and
IEC solutions safely and
efficiently control power and
protect circuits in explosive, wet
and corrosive environments
worldwide.
Available in a comprehensive
range of sizes, each with various
configurations for a multitude of
applications.
Solar solutions
Reduce system costs
Providing the most complete
offering of solar combiners,
smart combiners, recombiners,
disconnects and pass through
boxes for your grid-tied solar
applications.
EATON'S CROUSE-HINDS Solutions for power generation
3
LED savings
To demonstrate the savings of switching your facility
to LED, we've compared the Champ® VMV7L (62W
LED fixture) to an HID equivalent (175W pulse start
metal halide).
100
65%
energy savings
73%
lower total cost of
ownership
62W LED
100%
maintenance savings
Equivalent environmental impact
100
175W
pulse start
metal halide
Reduction in
CO2 emissions
231,994 lbs.
Reduction in
coal emissions
112,619 lbs.
Acres of trees
planted
29 acres
Fewer cars on
the road
20 cars
Number of
households' annual
electrical usage
22 homes
*Based on Environmental Protection Agency (EPA)
emissions factor assumptions.
4
EATON'S CROUSE-HINDS Solutions for power generation
LED case study
reliability and performance
HID to LED retrofit
Background:
A lighting design team for a major power plant was
researching and evaluating cost saving solutions to upgrade
outdated conventional high bay style HID, for a wide variety
of applications for both indoor and outdoor.
Requirements for the fixture included:
•
Robust design and long life
•
UL Listed
•
Class I, Divisions 1 & 2 hazardous ratings
•
Energy savings
•
Lumens per watt
•
Temperature rating
•
Instant on/off
•
Availability
Another key factor for the design team was labor savings
through retrofit design to reduce cost of installation.
Challenge:
Find a hazardous rated fixture that would deliver reliable
lighting, meet a variety of plant applications and reduce
energy consumption and maintenance costs. On top of
performance challenges, the plant also needed a proven
manufacturer who could provide reliable delivery and support.
Champ® FMV LED floodlights
Economic life can range
anywhere between 50,000
to 150,000 hours, or 5 to
20 years of maintenancefree operation.
LED system lifetime rated versus economic life:
Champ® VMV LED luminaires
Economic life can range
anywhere between 64,000
to 200,000 hours, or 7 to
20 years of maintenancefree operation.
LED system lifetime rated versus economic life:
Results:
Champ® VMV and FMV luminaires delivered the right
combination of reliability and long life performance the plant
was looking for. The performance of the VMV has been
exceptional and met or exceeded the design team’s
expectations. In fact, the Champ VMV and FMV have been
specified and installed in multiple facility projects since and
have now become the standard for future projects. Due to
the success they had with the VMV and FMV, the facility is
eager for information on new products and will not hesitate
to specify when an application presents itself.
EATON'S CROUSE-HINDS Solutions for power generation
5
Champ® Pro PFM LED
floodlights
Overview
Benefits
Champ Pro PFM floodlights are
designed to provide
full-spectrum, crisp, white light.
• Versatile design - Can be used
for outdoor or indoor
applications, and for a wide
range of mounting heights
depending on model and light
level requirement
Nine versions of the Champ
PFM LED are available for pole
and wall mounting, providing
ideal solutions for a wide range
of applications.
Certifications
• UL1598; UL1598A; UL875
• cUL
• Type 4X
• IP66
• DesignLights Consortium®
approved for select models*
• UL approved up to 65°C
ambient (3L-15L)
• cUL Listed to CSA Standard
CSA C22.2 No. 250
heavy industrial
• IEC Standards: IEC 60598; CE
* Refer to www.designlights.org Qualified
Products List under Family Models for
full listing details. Not all models are
approved for all application categories.
• Rugged heat sink - Designed
to perform in high ambient
temperatures up to +65°C
and as low as -40°C
• High lumen output - Up to 117
lumens per watt
• Full-frame yoke - Designed to
utilize the SFA6 slipfitter and
SWB6 wall mount bracket,
making it ideal for retrofit or
new installations
• Multiple lens options Tempered and clear glass
standard, polycarbonate and
diffused glass options
available
• Smaller and lighter - 25%
smaller and 10 lbs. (4.5 kg)
lighter than previous model
(3L-15L models)
Up to 75% reduction in energy costs and 150,000 hours of
continuous operation.
Dimensions (3L-15L models)
Model
Nominal
lumens*
Wattage
Efficacy
Equivalent
HID luminaire
PFM3L
3,189
28
114
70W-100W
PFM5L
5,183
45
115
100W-150W
PFM7L
7,095
62
114
150W-175W
PFM9L
9,132
79
116
175W-250W
PFM11L
11,107
99
112
250W-400W
PFM13L
13,100
112
117
400W
PFM15L
15,181
131
116
450W+
*Tolerance +/- 10%; at 120 VAC, 25°C ambient, 7x6 optics.
PFM3L–PFM15L
6
EATON'S CROUSE-HINDS Solutions for power generation
Champ® Pro PVM LED
luminaires
Overview
Benefits
Champ Pro PVM luminaires are
designed to provide
full-spectrum, crisp, white light
with custom Type I, III and V
distribution.
• Modular design - This
contractor-friendly design is
ideal for both retrofit and new
construction applications
Nine versions of the PVM are
available, providing ideal
solutions for a wide range of
applications.
Certifications
• High efficiency drivers Designed to provide reliable
operation in even the
harshest environments
• UL1598; UL1598A
• cUL
• Type 4X
• IP66
Consortium®
• DesignLights
approved for select models*
• cUL Listed to CSA Standard
CSA C22.2 No. 250
• IEC standard: CE
heavy industrial
• UL approved up to 65°C
ambient (3L-11L UNV1; all
other models 55°C)
* Refer to www.designlights.org Qualified
Products List under Family Models for
full listing details. Not all models are
approved for all application categories.
The Champ Pro PVM is the ideal
luminaire for illuminating conveyor
belts and walkways. Optics allow for
increased visibility and performance.
• Safe, reliable heat transfer Die cast aluminum housing
provides safe and effective
heat transfer from the LED
assembly to the outside
environment for reliability and
sustained lumen performance
• Type 4X rated - The LED
housing is constructed of
durable die cast aluminum,
providing an efficient thermal
path to the heat sink
assembly
• Custom optics - Type I, III and
V optics designed to
maximize light distribution
and intensity
• Lever-lock connectors and
3-pole terminal block
Up to 75% reduction in energy costs and 200,000 hours of
continuous operation.
120”
Conveyor Belt
Rail
Safety Grating
Model
Typical
lumens*
Wattage
Efficacy
Equivalent
HID luminaire
PVM3L
3,531
29
122
70W-100W
PVM5L
5,335
43
124
100W-150W
PVM7L
7,195
62
116
150W-175W
PVM9L
9,266
85
109
250W-320W
PVM11L
11,440
113
101
320W-400W
PVM13L
13,226
130
102
400W
PVM17L
18,793
168
112
400W-600W
PVM21L
22,110
196
113
600W-750W
PVM25L
26,531
232
114
750W-1000W
Rail
*Tolerance +/- 10%; Type V optics.
Champ® Pro PVM
Champ® Pro PVM
PVM3L–PVM11L
PVM13L and PVM17L
PVM21L and PVM25L
EATON'S CROUSE-HINDS Solutions for power generation
7
Industrial high bay
LED luminaires
Overview
Benefits
IHB LED luminaires are the
perfect replacement for
250W-1,500W HID and 4-10
lamp T5HO fluorescent high bay
fixtures. Designed for locations
requiring continuous and
consistent light levels, requiring
frequent on-and-off of lights and
that are difficult to relamp or
that cause production to be
stopped during the lamp
maintenance process.
• Increased efficiency Up to 117 lumens per watt
Certifications
• UL1598; UL8750
• cULus
• Multiple mounting options Available with pendant,
aircraft cable or jack chain
mounting
• Aluminum heat sinks for
superior thermal management
• Multiple lens options Tempered and clear glass
standard, diffused glass and
clear or diffused
polycarbonate options
available
• Optional occupancy sensor kit
available
• Damp locations
• DesignLights Consortium®
approved for select models
* Refer to www.designlights.org Qualified Products List under Family Models for full
listing details. Not all models are approved for all application categories.
light industrial
Economic life can range anywhere between 60,000 hours at 40oC to
120,000+ hours at 25oC or 5 to 10 years of maintenance-free operation.
L70 >140,000 hours at 60°C and >200,000 hours at 40°C.
Versatile mounting options
Equivalent luminaires
Model
HID
Fluorescent
Wattage
Lumens†
IHB16L
250W-500W
4 lamp T5HO
145
16,900
Efficacy
117
IHB24L
400W-750W
4-6 lamp T5HO
216
25,350
117
IHB32L
500W-1,000W
6-8 lamp T5HO
289
33,800
117
IHB48L
750W-1,500W
8-10 lamp T5HO
436
50,700
116
IHB64L
1,000W-1,500W+
10 lamp T5HO
582
67,600
116
†Preliminary typical values (+/- 10%); data subject to change. 8L option available; consult
product line for availability.
Jack chain
Aircraft cable
Pendant
8
EATON'S CROUSE-HINDS Solutions for power generation
Champ® MLL linear
LED luminaires
Overview
Benefits
The Champ MLL linear LED is
specifically designed to replace
fluorescent T12, T8 and T5HO
lighting in harsh and hazardous
applications. The rugged and
durable design features the
industry’s most versatile and
flexible mounting options. The
Champ MLL is the ideal solution
for high vibration, impact and
hose down applications.
• Industry-leading efficacy: up
to 130 LPW
Certifications
• Four points of secondary
retention
• Class I, Division 2, Groups
B, C, D
• Class II, Division 2 Groups
F, G
• Marine and Wet locations,
NEMA 4X, IP66
hazardous area rated
• -40°C to +65°C ambient
operating temperature
• Low profile (<3" height)
• Versatile ceiling/swivel, wall,
flush, pole and pendant
mounting options
• Wide and narrow optics for
uniform illumination
• 2,000 psi high pressure hose
rated
• High vibration resistance
(up to 5Gs)
• UL844; UL1598; UL1598A;
UL924
• Emergency battery back-up
(90 minutes) and surge
protection options (up to
10kV)‡
• CSA C22.2 Nos. 250, 137, 141
• 5 year fixture warranty
• DesignLights Consortium®
approved for select models*
* Refer to www.designlights.org Qualified Products List under Family Models for
full listing details. Not all models are approved for all application categories.
‡ One year warranty
Up to 67% reduction in energy costs
Versatile mounting options
Offset wall
Model
Typical
lumens
Wattage
Efficacy
Equivalent HID
luminaire
MLL2
3,600
29
124
2 x 2 ft. T5/T8/
T12HO
MLL4
7,100
54.5
130
2 x 4 ft. T5/T8/
T12HO
Flush ceiling
MLL4
Offset ceiling
Ceiling/swivel
MLL2
Ceiling and adapter
Pole mount
Pendant mount
EATON'S CROUSE-HINDS Solutions for power generation
9
Champ® VMV
LED luminaires
Overview
Benefits
Champ VMV luminaires are
designed to provide
full-spectrum, crisp, white light
with custom Type I, III and V
distribution.
• Modular design - This
contractor-friendly design is
ideal for both retrofit and new
construction applications
Nine versions of the VMV are
available, providing ideal
solutions for a wide range of
hazardous area applications.
Certifications
• Class I, Division 2, Groups
A, B, C, D
• Class I, Zone 2, nA nR; Zone
21 tb
• Class II, Groups E, F, G
• Class III
• UL844; UL1598; UL1598A;
UL8750; UL50; UL50E
• CSA C22.2 No. 137
• Type 4X, IP66
hazardous area rated
• IECEx/ATEX Certified; Zone
2/21; CE
• DesignLights Consortium®
approved for select models*
The Champ® VMV is the ideal luminaire
for illuminating conveyor belts and
walkways. Optics allow for increased
visibility and performance.
• High efficiency drivers Designed to provide reliable
operation in even the
harshest environments
• Type 4X rated - The LED
housing is constructed of die
cast aluminum, providing an
efficient thermal path to the
heat sink assembly. The
impact-resistant lens is sealed
and provides ingress
protection against water and
dust
• Custom optics - Type I, III and
V optics designed to
maximize light distribution
and intensity
• Lever-lock connectors and
3-pole terminal block
* Refer to www.designlights.org Qualified Products List under Family Models for full
listing details. Not all models are approved for all application categories.
Up to 75% reduction in energy costs and 200,000 hours of
continuous operation.
120”
Conveyor Belt
Rail
Safety Grating
Model
Typical
lumens*
Wattage
Efficacy
Equivalent
HID luminaire
VMV3L
3,531
29
122
70W-100W
VMV5L
5,335
43
124
100W-150W
VMV7L
7,195
62
116
150W-175W
VMV9L
9,266
85
109
250W-320W
VMV11L
11,440
113
101
320W-400W
VMV13L
13,226
130
102
400W
VMV17L
18,793
168
112
400W-600W
VMV21L
22,110
196
113
600W-750W
VMV25L
26,531
232
114
750W-1000W
Rail
Champ® VMV
• Safe, reliable heat transfer Die cast aluminum housing
provides safe and effective
heat transfer for reliability and
sustained lumen performance
Champ® VMV
*Tolerance +/- 10%; Type V optics.
VMV3L–VMV11L
10
VMV13L and VMV17L
EATON'S CROUSE-HINDS Solutions for power generation
VMV21L and VMV25L
Champ® FMV LED
floodlights
Overview
Benefits
Champ FMV floodlights are
hazardous location rated and are
designed to provide fullspectrum, crisp, white light.
• Versatile design - Can be
used for outdoor or indoor
applications, and for a wide
range of mounting heights
depending on model and light
level requirement
Nine versions of the FMV are
available for pole and wall
mounting, providing ideal
solutions for a wide range of
hazardous area applications.
Certifications
• Class I, Division 2, Groups A,
B, C, D
• Class I, Zone 2
• Class II, Groups E, F, G;
Simultaneous Presence; Class
III
• Type 4X, IP66
• UL844; UL1598; UL1598A;
UL8750
• CSA C22.2 No. 137
hazardous area rated
• IECEx/ATEX Certified; Zone
2/22; CE
• DesignLights Consortium®
approved for select models*
• Rugged heat sink - Designed
to perform in high ambient
temperatures up to +65°C
and as low as -40°C
• High lumen output - Up to 117
lumens per watt
• Full-frame yoke - Designed to
utilize the SFA6 slipfitter and
SWB6 wall mount bracket,
making it ideal for retrofit or
new installations
• Multiple lens options Tempered and clear glass
standard, polycarbonate and
diffused glass options
available
• Smaller and lighter - 25%
smaller and 10 lbs. (4.5 kg)
lighter than previous model
(3L-15L models)
* Refer to www.designlights.org Qualified Products List under Family Models for full
listing details. Not all models are approved for all application categories.
Dimensions (3L-15L models)
Up to 75% reduction in energy costs and 150,000 hours of
continuous operation.
Model
Nominal
lumens*
Wattage
Efficacy
Equivalent
HID luminaire
FMV3L
3,189
28
114
70W-100W
FMV5L
5,183
45
115
100W-150W
FMV7L
7,095
62
114
150W-175W
FMV9L
9,132
79
116
175W-250W
FMV11L
11,107
99
112
250W-400W
FMV13L
13,100
112
117
400W
FMV15L
15,181
131
116
450W+
*Tolerance +/- 10%; at 120 VAC, 25°C ambient, 7x6 optics.
FMV3L–FMV15L
EATON'S CROUSE-HINDS Solutions for power generation
11
Industrial/commercial fittings & glands
V-Spring® telescoping safety light pole
Overview
The V-Spring telescoping safety light pole increases safety and decreases labor costs associated with
lighting installation and routine maintenance. Its innovative design allows for all work to safely take place
on the platform or walkway, eliminating the need for portable ladders and fall protection equipment.
Applications include:
• Luminaires installed on industrial walkways, platforms, stairways and conveyors where OSHA/HSE
regulations require fall prevention equipment
• Hard to reach or dangerous areas where safety is a big concern
• Hazardous and harsh environments subject to corrosive agents, vibration and extreme temperatures
Condulet® conduit bodies, boxes,
covers and gaskets
Cable glands & accessories
Overview
Our global offering provides a
termination solution for virtually
every type on the market. These
cable glands are designed for
strict adherence to global
specifications. Available in a
wide range of materials,
including nickel-plated brass,
stainless steel, aluminum and
impact-resistant nylon.
Overview
Condulet boxes are installed in
conduit systems to:
accommodate wiring devices,
act as pull boxes, provide
openings to make 90° bends,
provide for splices, taps,
mounting outlets and provide
access to conductors for
maintenance and future system
changes.
Stainless steel fittings
Myers™ hubs
Overview
Stainless steel fittings deliver
unbeatable corrosion protection
where you need it, saving you
time and money. Superior
resistance to corrosion and heat,
combined with unmatched
strength, make stainless steel
fittings a long-term solution for
even the most extreme
environments.
Breathers & drains
12
Overview
Myers hubs are used in the
termination of electrical circuits
through wall of the enclosure.
Designed for use indoors or
outdoors with rigid conduit and
IMC. Suitable for use in
environmentally demanding
applications, including those
with the presence of chemicals,
such as acetic, citric and salt
water. Also available for use in
hazardous (classified) locations.
Liquidtight fittings – stainless steel
Overview
Overview
Breathers and drains are
installed in enclosures or conduit
systems to provide ventilation,
minimize condensation and drain
accumulated condensate.
Liquidtight fittings are used to
terminate and seal liquidtight
flexible metal conduit to an
oiltight, raintight or liquidtight
box or enclosure, where
superior corrosion resistance
and/or strength is required.
EATON'S CROUSE-HINDS Solutions for power generation
Control & apparatus
EMN 25 & 26 pushbutton motor starters
Manual motor & line starters
Overview
Overview
Explosionproof, compact,
across-the-line manual NEMA
starter for single and polyphase
VAC or VDC motors. Used for
fans and blowers, pumps,
compressors and conveyors.
NMN and GHG635 motor/line
starters are used for across-theline starting of motors, motor
overload and phase failure
protection and also for manual
starting and stopping.
XLPB industrial panelboards
XDT hazardous area transformers
Overview
Overview
An ideal low voltage power
distribution panel for harsh and
corrosive applications. Built
using our high quality, fieldproven Ex-CELL enclosures, the
XLPB panelboard provides long
product life, NEMA 4X
protection and easy installation.
Control stations
XDT hazardous location dry-type
transformers are designed to
operate where volatile
flammable liquids or gases are
handled, processed or used, and
where ignitable concentrations
of gases or vapors are normally
prevented by positive
mechanical ventilation.
Disconnect switches
Overview
Overview
N2S and GHG43 control stations
and selector switches are used
for motor control, visual
indication, on-off control of
circuits and circuit selection.
Hazardous area and ordinary
location disconnect switches are
used in manual "ON" and "OFF"
control of single-phase or threephase AC motors where
overload protection is not
required or is provided
separately.
ACE explosionproof variable frequency drives
Overview
ACE variable frequency drives
are highly flexible AC drives
designed specifically for
hazardous locations. Can be
mounted next to the motor in
the classified area, providing
significant installation cost
savings - along with the
traditional VFD benefits of
energy savings, speed and
torque control, and system
diagnostics.
Now available up to 75HP!
EATON'S CROUSE-HINDS Solutions for power generation
13
Plugs & receptacles
Arktite® interlocked receptacles with
enclosed disconnect switches
Posi-Max and Posi-Lok™ power distribution
systems, panels and connectors
Overview
Overview
Arktite interlocked receptacles
with enclosed disconnect
switches supply power to
portable or fixed electrical
equipment such as welders,
compressors, conveyors,
portable tools, lighting systems
and similar equipment.
Posi-Max power distribution
panels provide a quick and safe
method of connection to
portable generators. The unique
Posi-Max design allows for quick
and safe restoration of essential
power services.
Arktite products also prevent
engagement and disengagement
of the plug under load, providing
safe portable connections and
extended product life.
Posi-Max panels are available in
200A to 1200A and the
enclosure can be customized to
meet specific environmental and
configuration needs.
Posi-Lok distribution panels use
lightweight, single conductor
cables to provide the means for
hurried personnel to quickly and
safely connect and disconnect
power systems without having
to use any tools.
Posi-Lok plugs feature recessed
electrical contacts that are
protected by shatter-resistant
insulators and impact-resistant
molded sleeves.
Arktite® NBR non-metallic interlocked
receptacles with enclosed circuit breakers
Overview
Arktite NBR interlocked
receptacles with enclosed circuit
breakers are used to supply
power and provide short circuit
protection, thermal overload
protection and a disconnect
means for portable electrical
equipment such as motor
generator sets, compressors
and conveyors.
Roughneck™ multi-pin & single pole
connectors
Overview
IEC 60309 pin and sleeve
devices are the industry's first to
offer IP69K rated protection.
Each device has been carefully
engineered to offer reliability,
efficiency and added safety
protection in demanding wet
locations, particularly where
harsh wash downs are a must.
Arktite® 30A-100A non-metallic plugs,
receptacles & connectors
Overview
Overview
Multi-pin connectors
Heavy duty control and
instrumentation multi-pin
connectors for hazardous and
harsh industrial use.
Arktite circuit breaking plugs,
receptacles, cord connectors
and motor plugs are used to
supply power to portable
electrical devices such as
welders, motors, pumps,
conveyors and other similar
equipment where electrical
loads must be quickly
disconnected from power
sources.
Single pole connectors
Secure, single pole power, rated
to 1135A for use in hazardous
and normal locations.
14
IEC 60309 plugs, connectors, receptacles
& inlets
EATON'S CROUSE-HINDS Solutions for power generation
Enclosures
Ex-CELL stainless steel or sheet steel
enclosures
NEMA 4X enclosures
Overview
Overview
Broad offering of JIC, wall
mount, ground mount and freestanding enclosures with
superior ingress protection.
Protect against corrosion,
circulating and windblown dust,
falling dirt, dripping noncorrosive liquids, rain, splashing
water and hose-directed water.
A globally certified enclosure
and termination solution for Type
3S and 4X applications. Over 100
standard sizes in stainless steel
and painted steel, featuring
unique design features, precision
manufacturing and the highest
quality materials.
Non-metallic enclosures for non-hazardous
applications (NEMA 1, 3, 3R, 4X, 6P, 12)
The premier choice for
instrumentation and electrical
applications across the globe.
NEMA 7 enclosures
Overview
Overview
Made of fiberglass-reinforced
polyester, non-metallic
enclosures are exceptionally
durable, corrosion-resistant and
can withstand abuse and
exposure to chemicals, water and
extreme conditions.
EJB explosionproof enclosures
are used as a junction or pull
box, enclosure for splices and
branch circuit taps, terminal
blocks, relays and other electrical
devices.
EJB enclosures are certified for
use in areas which are
hazardous due to the presence
of hydrogen or gases and vapors
of equivalent hazard, such as
those found in process
industries.
Extensive offering of fiberglass
enclosures, including: small line,
pushbutton, junction box, raised
cover, Advantage, wall mount,
disconnect and Xtra deep.
Solar
Solar combiner boxes
Solar recombiner boxes
Overview
Overview
Solar combiner boxes are used
to group input wires/circuits
from several arrays and/or solar
panels. The combined circuit
results in fewer output circuits
and combines them into one
main bus or feed going to the
inverter, saving labor and
material costs.
Recombiner boxes are used in
larger photovoltaic systems. A
recombiner box effectively
groups the output wires from
several combiner boxes into one
main output feed which then
goes to the inverter.
Compact (SL) solar combiner boxes
Solar cable assemblies & harnesses
Overview
Overview
Compact solar combiner boxes
are designed and built to provide
long, dependable service in a
low profile, space saving design.
Compact combiners are third
party listed and are available in
either four or six circuits, with or
without fuses.
Custom-configured harness
assemblies are constructed
using only the highest quality
wire and components for
durability and longevity.
Pre-made whip and jumper
assemblies are ideal for
speeding solar panel installation.
EATON'S CROUSE-HINDS Solutions for power generation
15
U.S. (global headquarters):
Eaton's Crouse-Hinds business
1201 Wolf Street
Syracuse, NY 13208
Canada
Toll Free: 800-265-0502
FAX: (800) 263-9504
FAX Orders only: (866) 653-0645
Eaton Middle East
9714-8066100
FAX: 9714-8894813
chmesales@eaton.com
Korea
82-2-3484-6783
82-2-3484-6778
CCHK-sales@
cooperindustries.com
Mexico/Latin America/Caribbean
52-555-804-4000
FAX: 52-555-804-4020
ventascentromex@eaton.com
Singapore
65-6645-9888
FAX: 65-6297-4819
chsi-sales@
cooperindustries.com
Australia
61-2-8787-2777
FAX: 61-2-9609-2342
CEASales@
cooperindustries.com
Europe (Germany)
49 (0) 6271 806-500
49 (0) 6271 806-476
sales.CCH.de@
cooperindustries.com
China
86-21-2899-3600
FAX: 86-21-2899-4055
cchsales@
cooperindustries.com
India
91-124-4683888
FAX: 91-124-4683899
cchindia@eaton.com
(866) 764-5454
FAX: (315) 477-5179
FAX Orders Only:
(866) 653-0640
crousecustomerctr@eaton.com
For more information:
If further assistance is
required, please contact
an authorized Eaton
Distributor, Sales Office,
or Customer Service
Department.
Eaton's Crouse-Hinds
1201 Wolf Street
Syracuse, NY 13208
Crouse-Hinds.com
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 5128-0216
February 2016
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.