Approach & Navigational Aids IALE Inset Approach Light Compliances: Designed in accordance with FAA Specification E-2952 for high intensity approach lighting applications and FAA Specification E-2968 for MALSR applications. ETL tested to meet photometric requirements for FAA Specification E-2952 and E-2968. Complies with UFC 3-535-01 specification. Applications Ordering Information The Crouse-Hinds IALE semi-flush fixture is used in FAA high intensity approach lighting systems in the runway overrun pavement. They are also used at other locations beyond the overrun that require a low profile light fixture. The fixtures are uni-directional and provide applicable light beam colors of green for threshold, red for side row barrettes and white for centerline barrettes and crossbars. Features Low profile, .50˝ (12 mm) Few parts to stock Easy to maintain – no sealant required for prism Pressure test plug for seal integrity verification 8 5 0 6 A - - Fixture Type: 850 = Runway 6 = Model 6 FAA Specifications: C52 = FAA-E-2952, Clear C68 = FAA-E-2968, Clear G52 = FAA-E-2952, Green G68 = FAA-E-2968, Green R52 = FAA-E-2952, Red UFC Specifications: GX1 = UFC 3-535-01, Green Straight, Blank, Unidirectional GR2 = UFC 3-535-01, Green Straight, Red Straight, Bidirectional RX1 = UFC 3-535-01, Red Straight, Blank, Unidirectional L-823 Connection: P1 = One plug P2 = Two plugs Long lamp life – Quartz Halogen, 105 W, 6.6 A Table 1 FAA 105W C52 3 G52 2 R52 3 C68 1 G68 2 GX1 2 GR2 3 RX1 1 Home Office: United States – +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico • Brazil 3.29 Typical Photometric Data 8000 CD MIN. 10000 CD MIN. 10 8 10,000 8,500 4 VERTICAL ANGLE VERTICAL ANGLE 10 8 10,000 8,000 4 0 0 -12 -8 -4 0 4 8 -12 12 -8 10,000 CD 8,500 CD 10,000 CD MIN. REQ’D 1,500 MIN. VERTICAL ANGLE VERTICAL ANGLE 4 8 12 6,400 CD 7,500 CD MIN. 7,500 CD 12 24 16 8 0 8 4 0 -18 -12 -6 0 6 HORIZONTAL ANGLE 12 -12 18 FAA-E-2952, 8506A-C52 3 x 105W Lamp, White 800 MIN. -8 -4 0 4 HORIZONTAL ANGLE 8 12 FAA-E-2952, 8506A-G52 2 x 105W Lamp, Green 3,400 CD 4,000 CD MIN. 4,000 CD 12 10,000 CD 1,000 CD MIN. 5,000 CD MIN. 5,000 CD 12 VERTICAL ANGLE VERTICAL ANGLE 0 FAA-E-2968, 8506A-G68 2 x 105W Lamp, Green FAA-E-2968, 8506A-C68 105W Lamp, White 8 4 0 8 10,000 CD MIN. AVG. 4 0 -12 -8 -4 0 4 HORIZONTAL ANGLE 8 FAA-E-2952, 8506A-R52 3 x 105W Lamp, Red 3.30 -4 HORIZONTAL ANGLE HORIZONTAL ANGLE 12 -12 -8 -4 0 4 HORIZONTAL ANGLE 8 12 UFC 3-535-01 2 x 105W Lamp, Green www.crouse-hinds.com/airportlighting Outline Drawing LENS O-RING LAMP LENS GASKET 0.5 (12) 1.25 (32) 0.75 (19) 5.68 (144) 11.94 (303) Dimensions: Inches (mm) Instruction Manual: 2623 (FAA) 2645 (UFC) Shipping Weight: 17.0 7.7 kg. Shipping Volume: 0.6 cu. ft. 0.04 m3 Accessories Description Part Number Description Part Number Adaptor ring, 15˝ base with 12˝ fixture Base: L-868B, Class I, 24˝ Deep* Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D. 21151 AC24242Q200303 54 Super-D4-D4 Heat Shrink Kit – 1 Piece Heat Shrink Kit – 2 Piece Lifting Tool Isolation Transformer 10047-2154 10047-1425 19999 See Transformer Section Description Part Number Description Part Number Bottom Cover Assembly with power lead, -1= 1 lead -2 = 2 leads Gasket – Bottom Cover Gasket Lubricant – 5.3 oz. Container 21286-X 10035-33-273 10048-25 Lamp – 105 W, 6.6 A Lens Replacement Kit – Green Lens Replacement Kit – Red Lens Replacement Kit – White 21128 21321-G** 21321-R** 21321-C** Renewal Parts * Fixture with total lamp wattage greater than 150 W should not be mounted on 12˝ diameter base less than 20 inches (500mm) deep. Class II bases are not recommended for this application. ** Includes lens, lens boot, lens retaining gasket and gasket lubricant. Home Office: United States – +1 860-683-4300 International Offices: Canada • China • Dubai • Mexico • Brazil 3.31