Ph# 1-800-663-8806
www.omnexcontrols.com
T150C / T151C
Configurator
Customer Name:
Machine Name\Model Number:
Revision Number:
Please note revision history details on last page for updates to existing configurators.
Date:
Contact Name:
Contact Number:
Customer Email:
T151
T150
#74-1833 Coast Meridian Road, Port Coquitlam, BC, Canada • V3C 6G5
Configurator Version 6.1
T150/T151 Configuration and Options
Ph# (604) 944-9247 • Fax# (604) 944-9267
1 of 7
Toll Free 1-800-663-8806
Ph# 1-800-663-8806
www.omnexcontrols.com
Application Details
Where on the Machine are you mounting the receiver:__________________________________
________________________________________________________________________________
________________________________________________________________________________
If you are mounting the receiver in an enclosure, what material is the enclosure made of:
________________________________________________________________________________
Typically, how far away from the receiver will the operator be using the transmitter:
_____________Feet
Will the operator have direct line of sight to the receiver:
________________________________________________________________________________
Frequency Band
Select the desired Radio Frequency Band (Check one). If you have unsure which frequency
band to choose please discuss with your sales representative.
902-928MHz Radio Frequencies for North America.
900MHz typically gets 1500 Feet of range line of sight with an internal antenna. External antennas are available to extend this range.
Please discuss options with your sales representative.
2.4-2.483 GHz Radio Frequencies for North, South America, European Union and Asia.
2.4GHz typically gets 900 Feet of range line of sight with an internal antenna. External antennas are available to extend this range.
Please discuss options with your sales representative.
Receiver Antenna Options
Internal antenna (standard)
External antenna, Indicate Length
6 foot lead
12 foot lead
20 foot lead
T150/T151 Configuration and Options
2 of 7
Ph# 1-800-663-8806
www.omnexcontrols.com
Transmitter Options
OR
T150C
T151C (Belt Clip Installed)
Trigger
Potentiometer
Can be used as digital
or proportional
Potentiometer
Transmitter Accessories
Finger Guard (T150C Only)
Magnet Battery Cover
Waist Belt (T151C Only)
Pendant Connector installed on transmitter
(used to bypass the batteries and turn off radio transmissions)
Batteries (4 x AA Alkaline)
T150/T151 Leather Holster
Recharge Dash Cradle
CCDOCK™
Batteries (4 x AA NiMH)
Transmitter Time Out
Once turned on; the transmitter will remain on until the E-Stop or OFF switch are pressed. As a
battery saving feature the transmitter will turn off if there have been no functions activated for:
10 Minutes
4 Hours
1 Hour
No Time Out
T150/T151 Configuration and Options
3 of 7
Ph# 1-800-663-8806
www.omnexcontrols.com
Receiver Cable Options
Choose ONE of the receiver wiring options
Receiver Cable
with Pendant
10 Foot
Receiver Cable
10 Foot
Deutsch
Connectors
Pendant
Connectors
None
Custom made output cable. See Output Cable Specification document.
Pendant Cable Options
Choose ONE of the pendant cable options
25’ Pendant Cable
33’ Pendant Cable
100’ Pendant Cable
4’ to 12’ Pendant Coil
None
T150/T151 Configuration and Options
4 of 7
Ph# 1-800-663-8806
www.omnexcontrols.com
T150/T151 Faceplate
Choose one of the T150C/T151C Transmitter Faceplates
1-6 Switch with E-Stop
1-7 Switch with E-Stop
1-6 Switch with Power ON/
OFF
Note: Switch 7 is Power ON/OFF
and must be installed.
Digital Output Types
(Indicate switch to Battery or Ground)
Momentary—Output is on while switch is active
Latching— Pressing the switch the first time turns on the output, the second press turns off the output.
Two Button Latching—Two switch positions one output. ON button turns on output OFF button turns off output.
Proportional Output Types
PWM (Pulse Width Modulation)— E.g. Apitech 35Hz, 12 VDC
Current Control — E.g. HAWE 200-800mA, 12VDC
Analog (Variable Voltage) — E.g. 0-Battery, 0-10 VDC
4—20mA
0-95mA, +/- 95mA
Please include part number and spec for proportional valves and outputs
If any other output type is required please describe in table or special requirements.
T150/T151 Configuration and Options
5 of 7
Ph# 1-800-663-8806
www.omnexcontrols.com
T150/T151 Label, Switch and Output Type
Function Name
SW #
As it will appear on the label
Trigger
N/A
Switch Type
Safety Interlock
Type of Output
Momentary
Maintained
Lift to Operate
Potentiometer
SW# + or to be interlocked
with
Select from list on previous page or describe required output type.
Example: Momentary switch to 12 VDC
N/A
SW1 +
SW1
SW1 SW2 +
SW2
SW2 SW3 +
SW3
SW3 SW4 +
SW4
SW4 SW5 +
SW5
SW5 SW6 +
SW6
SW6 SW7 +
SW7
SW7 -
T150/T151 Configuration and Options
6 of 7
Ph# 1-800-663-8806
www.omnexcontrols.com
Special Requirements
E-Stop Operation (What should the outputs do after the E-Stop is pressed?) Typically “all
outputs off”:
Out of Range Operation (What should the outputs do if there is a loss of link or the Transmitter batteries die?) Typically “all outputs off”:
Please indicate any special requirements (i.e.: Special interlocks, time delays, any wishes
you may have).
T150/T151 Configuration and Options
7 of 7
Ph# 1-800-663-8806
www.omnexcontrols.com
Revision History
Revision
Number
Changed by
Date
Change Details—Describe in detail exactly what has
changed from the previous revision.
2
Customer Sign-Off on Requirements and Label
A sign-off of this configuration document and label (following page) is required before an order can be entered. The sign
off is only required after the configurator is completed, reviewed and a label has been created and attached. Please print
this page, fax (604-944-9267) or scan and email the signed document to your sales representative.
Proposal #_____________ (to be completed by OMNEX)
I _____________________, on behalf of ___________________, declare that all system requirements, I/O functionality
(Name)
(Company)
and logic, and label artwork (following page), as defined in this document, are correct, and that all OMNEX safety features available for this system have been explained and are understood.
_____________________________
(Signature)
T150/T151 Configuration and Options
8 of 7