NEXION Commercial
Wallbox Sensors
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Passive Infrared (PIR)
Wall Mount Occupancy
Sensor with InstinctTM
Technology
Single or Dual Relay
No Neutral
120/277 V/AC
Incandescent, Halogen,
Fluorescent, Motor
INS
Commercial Specification Grade Infrared Occupancy Sensor
FEATURES
• Selectable Automatic ON mode or Manual ON
mode.
• Convenient installation and test mode for
set up.
• Adjustable built-in light level sensor.
• Selectable time delay.
• California Title 24 compliant.
• For use with Incandescent lamps, Halogen
fixtures, Electronic and Magnetic Fluorescent
ballasts, and Electrical motor loads.
• 120 and 277V in the same unit.
INSTINCT
• Self-adjusts sensitivity and time delay in
real-time with Instinct Technology.
• Single-Pole or 3-Way wiring.
• Manual OFF push button can be used in
either automatic or manual mode.
• Reinforced lens is tamper-resistant.
• Zero-crossing technology to maximize relay
life and ensure wall switch longevity.
• Fits standard size Decorator wallplate.
3.13"
(79mm)
4.88"
(133mm)
Wire Leads – Wall Mount
Coverage Area
Description
1000 sq. ft. major motion
180° Passive Infrared
Single Relay Occupancy
Sensing Wall Switch
(92.2 sq. m)
300 sq. ft. minor motion
Catalog No.
(27.9 sq. m)
1000 sq. ft. major motion
180° Passive Infrared
Dual Relay Occupancy
Sensing Wall Switch
(92.2 sq. m)
300 sq. ft. minor motion
I OSP10-___
I OSP10D-___
Available
Colors
A, BK, GY,
LA, V, W
OSP10
3.13"
(79mm)
A, BK, GY,
LA, V, W
(27.9 sq. m)
For ordering, include Cat. No. followed by the color code: A (Almond), BK (Black), GY (Gray),
LA (Light Almond), V (Ivory), W (White)
4.88"
(133mm)
Coverage Areas
36’
20’
Minor Motion, IR
8’
15’
Major Motion, IR
Maximum coverage area may
vary somewhat according to room
shape and the presence of obstacles.
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
• Listed to UL 508
• California Title 24 Energy Code compliant
• RoHS Compliant
• Environmental: Flammability meets UL94
requirements; V0 rated
• Temperature Rating: 0ºC to 40ºC (32ºF to 104ºF)
www.cooperwiringdevices.com
OSP10D
TM
IN
INS
NEXION Occupancy Sensor
Specification & Performance Data
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Application
The Core Lighting Controls stylish Passive Infrared Wallbox sensor provides a
OSP10 Wiring Diagrams
convenient energy saving lighting control alternative for 120V – 277V, in both
Single
Level 3-Way
single and dual output configurations. The use of self-adaptive InstinctTM
TRAVELER
WIRES TRAVELER
HOT
WIRES
technology optimizes the potential energy savings by automatically adjusting
HOT
the sensor behavior to the existing conditions in real-time. The sensor also
includes light level sensing capability to further enhance the energy savings by
BLUE
BLACK
BLUE
BLACK
preventing automatic control of the lights when the ambient light level is
sufficient. This sensor is easily installed in any standard wallbox to control most
GREEN
GREEN
lighting loads and is available in six colors.
LOAD
BLUE
BLACK
BLUE
GREEN
GREEN
GROUND
GROUND
LOAD
GROUND
GROUND
BLACK
NEUTRAL
Device Type
NEUTRAL
Passive Infrared Wall Mount Passive Infrared Wall Mount THREE-WAY
WIRING DIAGRAM:
THREE-WAY
WIRING
LIGHTS WILL
TURN OFF,
WHENDIAGRAM:
UNIT THAT WAS TURNED ON LAST AND/OR DETECTEDMOTION LAST TIMES-OUT.
Occupancy Sensor,
Occupancy Sensor,
LIGHTS WILL TURN OFF, WHEN UNIT THAT WAS TURNED ON LAST AND/OR DETECTEDMOTION LAST TIMES-OUT.
OSP10
OSP10D
Dual Level Wiring Using a Toggle Switch
Wiring Type
Pre-stripped wire leads
Pre-stripped wire leads
• Listed to UL 508
• Listed to UL 508
BLACK
HOT
Testing & Code
• California Title 24 Energy
Compliance
Code compliant
BLUE
BLACK
HOT
• California Title 24 Energy
Code compliant
BLUE
GREEN
GREEN
LOAD 1
LOAD 2
LOAD 1
LOAD 2
GROUND
Specifications:
Environmental
GROUND
Warranty
5-year limited warranty
Flammability
Meets UL 94 requirements; V0 Meets UL 94 requirements; V0
rated
rated
5-year limited warranty
Temperature
Rating
0ºC to 40ºC (32ºF to 104ºF)
0ºC to 40ºC (32ºF to 104ºF)
Humidity Rating
Relative humidity less than
90%, non-condensing
Relative humidity less than
90%, non-condensing
NEUTRAL
NEUTRAL
Single Level
For indoor use only
Power
Requirements
120/277 VAC @ 60 Hz
BLUE
BLACK
HOT
BLUE
BLACK
HOT
GREEN
LOAD
GREEN
LOAD
GROUND
GREEN
GROUND
Operating
Areas
BLUE
BLACK
HOT
For indoor use only
LOAD
GROUND
NEUTRAL
Dimensional
Data
Specifications:
Materials
Specifications:
Operation
Specifications:
Mechanical
Specifications:
Electrical
NEUTRAL
Incandescent/halogen @120V:
6.7A, 800W, 60Hz
Fluorescent @120V: 10A,
1200W, 60Hz
Maximum Load
Fluorescent @277V: 9.8A,
2700W, 60Hz
Motor @ 120V: 1/4 HP @ 125
VAC
120/277 VAC @ 60 Hz
WIRING DIAGRAM 1: DUAL LEVEL SINGLE CIRCUIT
Incandescent/halogen @120V:
6.7A, 800W, 60Hz
Fluorescent @120V: 10A,
1200W, 60Hz
Fluorescent @277V: 9.8A,
2700W, 60Hz
Motor @ 120V: 1/4 HP @ 125
VAC
NEUTRAL
OSP10D Wiring Diagrams
Dual Level Single Circuit
HOT
BLACK
BLUE
RED
RED
GREEN
LOAD 2
LOAD 1
GROUND
Detection
Technology
Passive Infrared (PIR)
Passive Infrared (PIR)
Mounting
NEMA wall box
NEMA wall box
NEUTRAL
LED Indicating
Red
Lamp
Time Delay
Coverage
Operating
Modes
DIP Switch
Adjustable, from 5 sec. to 30
min.
1000 sq ft. 180° field of view
Automatic On/Automatic Off
Manual On/Automatic Off
Accessed by removable push
button
WIRING DIAGRAM 3: DUAL LEVEL SINGLE CIRCUIT 3-WAY
Dual Level Single Circuit 3-Way
TRAVELER
WIRES
HOT
Red
Adjustable, from 5 sec. to 30
min.
1000 sq ft. 180° field of view
Automatic On/Automatic Off
Manual On/Automatic Off
Accessed by removable push
button
BLACK
BLUE
BLUE
RED
RED
RED
GREEN
LOAD 2
BLACK
RED
GREEN
LOAD 1
GROUND
GROUND
NEUTRAL
3-WAY WIRING DIAGRAM: LIGHTS WILL TURN OFF, WHEN UNIT THAT WAS TURNED ON LAST AND/OR DETECTED MOTION LAST TIMES-OUT
Lens
Reinforced, tamper-resistant
Fresnel lens
Reinforced, tamper-resistant
Fresnel lens
Housing
Injection molded
Polycarbonate resin housing
Injection molded
Polycarbonate resin housing
Mounting Plate
4.15"H X 1.94"W
(10.54cm x 4.92cm)
4.15"H X 1.94"W
(10.54cm x 4.92cm)
Product
Housing
2.73"H X 1.8"W X 1.8"D
(6.93cm x 4.57cm x 4.57cm)
2.73"H X 1.8"W X 1.8"D
(6.93cm x 4.57cm x 4.57cm)
Specifications subject to
change without notice.
Dual Level Dual Circuit
HOT
CIRCUIT 1 BLACK
BLACK
HOT
RED
CIRCUIT 2
RED
HOT
BLUE
BLUE
RED
RED
GREEN
GREEN
CIRCUIT 1
GROUND
GROUND
LOAD 2
LOAD 2
LOAD 1
LOAD 1
NEUTRAL (CIRCUIT 2)
NEUTRAL
NEUTRAL (CIRCUIT 1)
CAUTION: IF A ROOM IS WIRED FOR TWO CIRCUITS USING TWO SEPARATE HOT LEADS, IT IS VERY IMPORTANT TO CONNECT
ONLY ONE CIRCUIT PER RELAY.
*BOTH CIRCUITS MUST BE FED FROM THE SAME PHASE.
www.cooperwiringdevices.com
CIRCUIT 1
HOT
CIRCUIT 2
HOT
BLACK
RED
GREEN
CIRCUIT 1
BLUE
RED
2-CLCOSPSPSH-0211
LOAD 2
LOAD 1