Invue
D ES C R IPTION
The EPIC Collection delivers custom luminaire flexibility with the quality
and availability expectations of standard specification grade product.
Offered in two housing sizes and hundreds of unique combinations,
the EPIC Collection can be dressed to suit any application. Recognizing
evolving environmental and legislative trends, the EPIC Collection
delivers world class optical solutions to the decorative luminaire
marketplace. The EPIC Collection offers targeted solutions for full cutoff
compliance, spill light control and path of egress illumination while
integrating the latest lamp technologies into visually comfortable lighting
solutions.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
TOP: Cast aluminum top housing
attaches to cast aluminum
mounting arm hub with four
stainless steel fasteners. One-piece
silicone gasket between mounting
hub and top casting seals out
moisture and contaminants. (See
the mounting arm accessories
section for a full selection of
mounting arms. (Only these arms
are compatible with the Epic
luminaire). MIDSECTION: Utilizes
continuous silicone gaskets to seal
top casting and shade. The mid
section features cast aluminum
construction and stainless steel
assembly hardware: Rings feature
clear acrylic rings suspended
by stainless steel spacers and
hardware. SHADES: Heavy gauge
precision spun aluminum shades
offer superior surface finish and
consistency in form. DOORFRAME
ASSEMBLY: Used with horizontally
lamped segmented optical
systems. Die-cast aluminum 1/8”
thick door and doorframe seal to
underside of shade with a thick
wall continuous silicone gasket.
Door hinges opens via release
of two concealed quick release
fasteners. Impact resistant 1/8”
thick tempered flat or sag glass
lens seals to door with a one-piece
silicone gasket.
El e c tri c a l
ELECTRICAL TRAY: Ballast and
related electrical componentry are
mounted to a reinforced one-piece
tray with integral handle. Quick
disconnect wiring plugs allow
easy tray removal during routine
maintenance.
Fin ish
Housing finished in a five-stage
premium TGIC polyester powder
coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, graphite
metallic and hartford green.
RAL and custom color matches
available. Consult your lighting
representative at Eaton for more
information.
O pti c a l
OPTICAL SYSTEMS: Choice of five
high efficiency segmented optical
systems constructed of premium
95% reflective anodized aluminum
sheet. Optical segments are rigidly
mounted inside a thick gauge
aluminum housing for superior
protection. All segment faces
are clean of rivet heads, tabs, or
other means of attachment which
may cause streaking in the light
distribution. All reflector modules
feature tool-less removal, quick
disconnect wiring plugs, and are
360° field rotatable.
ECM/EMM
EPIC MEDIUM
42 - 150W
Pulse Start Metal Halide
D IMENS IONS
ECM Classical
Compact Fluorescent
EMM Modern
DECORATIVE AREA LUMINAIRE
Maximum
Height
21"
[533mm]
Maximum
Height
20"
[508mm]
CERTIFICATION DATA
See configurations for more detailed information.
EPA
Effective Projected Area: (Sq. Ft.)
Flat Lens .94
Sag Lens 1.04
SHIPPING DATA
Approximate Net Weight:
37 lbs. (17 kgs.)
C
ER
TEM
S
YS
D
Maximum Width
24-1/16" [611mm]
S
Maximum Width
24-1/16" [611mm]
IP66 Rated
U.L. 1598 Listed
2G Vibration Tested
CSA Listed
40°C Ambient Temperature Rating
ISO 9001
TIFIE
TD500023EN
2015-06-11 14:58:03
ECM /E M M EPI C M ED I U M
ORDER ING INFOR M A TION
Sample Number: ECM-150-MP-MT-3S-FG-SR-FL-BK-L
Product
Family 1
Lamp
Wattage 2
ECM=Epic
Classical
Medium
EMM=Epic
Modern
Medium
Compact
Fluorescent 3
42=42W
57=57W 4
Pulse Start
Metal Halide
50=50W
70=70W
100=100W
150=150W
Lamp Type
Voltage 6
Distribution
Lens Type
CF=Compact
Fluorescent 5
MP=Pulse
Start
Metal
Halide
UNV=120-277V
Universal
Electronic
Ballast
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
wired 277V 7
MT=Multi-Tap
wired 277V 8
TT=Triple-Tap
wired 347V 9
2S=Type II Segmented
3S=Type III Segmented
4S=Type IV Segmented
5S=Type V Segmented
SL=Forward Throw with
Spill Light Eliminator 11
FG=Flat Glass
SG=Sag Glass
VS=Polycarbonate
Vandal Shield 10
Options (Add as Suffix)
Accessories (Order Separately) 15
F=Single Fuse
(120, 277 or 347V. Specify voltage)
FF=Double Fuse
(208, 240 or 480V. Specify voltage)
EM=Quartz Restrike with Time Delay
(Also strikes at cold start) 12
EM/SC=Quartz Emergency Separate Circuit 12
Q=Quartz Restrike 12
HS=House Side Shield 13
PM48=Pendant Mount 48" Length or
Specify Pendant Length Inches (XX) 14
L=Lamp Included
WG=Wire Guard
Classical
VA6150-XX=Bishop Wall Mount Arm
VA6151-XX=Bishop Wall Mount Arm with Cross Rod
VA6152-XX=Traditional Wall Mount Arm
VA6153-XX=Traditional Wall Mount Arm with 45° Strap
VA6154-XX=Bishop Single Pole Mount Arm
VA6155-XX=Bishop Single Pole Mount Arm with Cross Rod
VA6156-XX=Bishop Twin Pole Mount Arm
VA6157-XX=Bishop Twin Pole Mount Arm with Cross Rods
VA6158-XX=Traditional Single Pole Mount Arm
VA6159-XX=Traditional Single Pole Mount Arm with Rounded Upper Bar
VA6160-XX=Traditional Single Pole Mount Arm with Rounded Lower Bar 16
VA6161-XX=Traditional Single Pole Mount Arm with 45° Upper Bar
VA6162-XX=Traditional Single Pole Mount Arm with 45° Lower Bar 16
VA6163-XX=Traditional Single Pole Mount Arm with 45° Upper Strap
VA6165-XX=Traditional Twin Pole Mount Arm
VA6166-XX=Traditional Twin Pole Mount Arm with Rounded Upper Bars
VA6167-XX=Traditional Twin Pole Mount Arm with Rounded Lower Bars 16
VA6168-XX=Traditional Twin Pole Mount Arm with 45° Upper Bars
VA6169-XX=Traditional Twin Pole Mount Arm with 45° Lower Bars 16
VA6170-XX=Traditional Twin Pole Mount Arm with 45° Upper Straps
VA6171-XX=Mast Arm Adapter
Mid Section
Type
SO=Solid
SR=Solid Rings
Shade Type
Color 11
BL=Bell
FL=Flute
SN=Straight
Narrow
SW=Straight
Wide
AP=Grey
BZ=Bronze
BK=Black
DP=Dark
Platinum
GM=Graphite
Metallic
WH=White
OA/RA1016=NEMA Twistlock Photocontrol - Multi-Tap
OA/RA1027=NEMA Twistlock Photocontrol - 480V
OA/RA1201=NEMA Twistlock Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
Accessory Options 17, 18
V=Victorian Finial
M=Modern Finial
A=Architectural Finial
N=Nostalgic Finial
R=NEMA Twistlock Photocontrol Receptacle 19
Modern
VA6101-XX=Bishop Wall Mount Arm
VA6102-XX=Bishop Wall Mount Arm with Cross Rod
VA6103-XX=Traditional Wall Mount Arm
VA6104-XX=Traditional Wall Mount Arm with 45° Strap
VA6105-XX=Bishop Single Pole Mount Arm
VA6106-XX=Bishop Single Pole Mount Arm with Cross Rod
VA6107-XX=Bishop Twin Pole Mount Arm
VA6108-XX=Bishop Twin Pole Mount Arm with Cross Rods
VA6109-XX=Traditional Single Pole Mount Arm
VA6110-XX=Traditional Single Pole Mount Arm with Rounded Upper Bar
VA6111-XX=Traditional Single Pole Mount Arm with Rounded Lower Bar 16
VA6112-XX=Traditional Single Pole Mount Arm with 45° Upper Bar
VA6113-XX=Traditional Single Pole Mount Arm with 45° Lower Bar 16
VA6114-XX=Traditional Single Pole Mount Arm with 45° Upper Strap
VA6116-XX=Traditional Twin Pole Mount Arm
VA6117-XX=Traditional Twin Pole Mount Arm with Rounded Upper Bars
VA6118-XX=Traditional Twin Pole Mount Arm with Rounded Lower Bars 16
VA6119-XX=Traditional Twin Pole Mount Arm with 45° Upper Bars
VA6120-XX=Traditional Twin Pole Mount Arm with 45° Lower Bars 16
VA6121-XX=Traditional Twin Pole Mount Arm with 45° Upper Straps
VA6122-XX=Mast Arm Adapter
NOTES:
1. Arm not included. Use with Invue brand arms. See accessories.
2. All HID lamps are medium-base.
3. Available in Type 3S, 4S and 5S, and all vertical optical systems only.
4. Nominal M.O.L lamp length of 57W CFL not to exceed 7".
5. CF ballasts are 120 through 277V. Specify with UNV voltage designation.
6. Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
7. Dual-tap is 120/277V wired 277V.
8. Multi-tap is 120/208/240/277V wired 277V.
9. Triple-tap is 120/277/347V wired 347V.
10. Maximum wattage of 100W HID. Not available with wire guard.
11. Custom and RAL color matching available upon request. Consult your lighting representative at Eaton for more information.
12. Quartz options not available with SL optic or vertical lamped optical systems.
13. House side shield available on horizontally lamped 2S, 3S and 4S optical systems only.
14. Minimum pendant length is 9-1/2". Length's over 4' Consult your lighting representative at Eaton for more information. Includes 3/4" pendant pipe in specified length, swivel hanger and canopy cover. Swivel under canopy
uses 3/4" NPT thread, fixture head uses 3/4" NPSM, 2-3/4" long thread. "PM" option must be used with Invue pendant kit only.
15. Replace XX with color suffix.
16. Requires use of 4" O.D. round straight pole.
17. Add as suffix to accessory. Example: VA6109-BK-R.
18. Finials compatible with traditional arms only.
19. Not compatible with finials, bishop wall mount arms or pendant mounting.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TD500023EN
2015-06-11 14:58:03
ECM /E M M EPI C M ED I U M
C ONF IGUR A TIONS
HOUSING
MID SECTION
SHADE
MOUNTING OPTION
Solid
3-7/16" H x 9-15/16" W
Classical
8-5/8" H x 8-3/4" W
Straight Narrow
6-5/8" H x 19-1/8" W
Bell
8" H x 24" W
Height from
ceiling equals
calculated height
of fixture plus
pendant length
and 7/8"
Solid Rings
3-7/16" H x 12" W
Modern
9-3/8" H
x 8-7/8" W
Straight Wide
5-1/8" H x 23-15/16" W
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
Flute
6" H x 22-1/2" W
TD500023EN
2015-06-11 14:58:03
ECM /E M M EPI C M ED I U M
MOUNT ING A C C ES S OR IE S
Pole mount arms are designed to fit both medium ECM/EMM housings. (Only these arms are compatible with the Epic luminaire). Arms feature a precision welded cast aluminum
mounting hub for attachment of fixture head to arm with four stainless steel fasteners. Wall mount arms compliment pole mount luminaires and attractively transition fixture scale in lower
mounting height pedestrian environments. Wall mount arms are designed to fit both medium ECM/EMM housings. Arms feature a precision welded cast aluminum mounting hub for
attachment of fixture head to arm with four stainless steel fasteners.
33-1/2" [852mm]
62" [1575mm]
33-1/2" [852mm]
2"
[51mm]
2"
[51mm]
54-3/16"
[1376mm]
BISHOP SINGLE POLE
MOUNT ARM
VA6105 (Modern), VA6154 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 24 lbs. E.P.A: 0.92
62" [1575mm]
Radius
12"
[304mm]
Radius
12"
[304mm]
Radius
12"
[304mm]
2"
[51mm]
54-3/16"
[1376mm]
BISHOP SINGLE POLE MOUNT ARM
WITH CROSS ROD
VA6106 (Modern), VA6155 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 25 lbs. E.P.A: 0.98
Radius
12"
[304mm]
54-3/16"
[1376mm]
BISHOP TWIN POLE MOUNT ARM
VA6107 (Modern), VA6156 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.43
2"
[51mm]
54-3/16"
[1376mm]
BISHOP TWIN POLE MOUNT
ARM WITH CROSS RODS
VA6108 (Modern), VA6157 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 39 lbs. E.P.A: 1.55
30-15/16" [786mm]
26-3/4" [679mm]
18-7/8"
[480mm]
35-7/8"
[911mm]
18-7/8"
[480mm]
35-7/8"
[911mm]
35-7/16"
[900mm]
26-3/4" [679mm]
30-15/16" [786mm]
TRADITIONAL SINGLE POLE
MOUNT ARM
VA6109 (Modern), VA6158 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 20 lbs. E.P.A: 0.86
26-3/4" [679mm]
26-3/4" [679mm]
30-15/16" [786mm]
30-15/16" [786mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH ROUNDED
UPPER BAR
VA6110 (Modern), VA6159 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.4
TRADITIONAL SINGLE POLE
MOUNT ARM WITH ROUNDED
LOWER BAR
VA6111 (Modern), VA6160 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 25 lbs. E.P.A: 1.16
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45° UPPER BAR
VA6112 (Modern), VA6161 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.38
30-15/16" [786mm]
26-3/4" [679mm]
18-7/8"
[480mm]
35-7/16"
[900mm]
18-7/8"
[480mm]
35-7/16"
[900mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
26-3/4" [679mm]
30-15/16" [786mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45° LOWER BAR
VA6113 (Modern), VA6162 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 24 lbs. E.P.A: 1.17
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45° UPPER STRAP
VA6114 (Modern), VA6163 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 24 lbs. E.P.A: 1.17
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TRADITIONAL TWIN POLE
MOUNT ARM
VA6116 (Modern), VA6165 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 30 lbs. E.P.A: 1.44
TD500023EN
2015-06-11 14:58:03
ECM /E M M EPI C M ED I U M
MOUNTING A C C ES S OR IE S
57" [1448mm]
53-1/2" [1359mm]
26-3/4" [679mm]
35-7/16"
[900mm]
35-7/16"
[900mm]
18-7/8"
[480mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH ROUNDED
UPPER BARS
VA6117 (Modern), VA6166 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.28
35-7/16"
[900mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH ROUNDED
LOWER BARS
VA6118 (Modern), VA6167 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 40 lbs. E.P.A: 2.04
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45° UPPER BARS
VA6119 (Modern), VA6168 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.24
57" [1448mm]
53-1/2" [1359mm]
26-3/4" [679mm]
35-7/16"
[900mm]
18-7/8"
[480mm]
35-7/16"
[900mm]
8-3/8"
[211mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45° LOWER BARS
VA6120 (Modern), VA6169 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 40 lbs. E.P.A: 2.0
NEMA
Photocontrol
Receptacle
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45° UPPER STRAPS
VA6121 (Modern), VA6170 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.81
NEMA
Photocontrol
Receptacle
8-3/8" [211mm]
MAST ARM ADAPTER
VA6122 (Modern), VA6171 (Classical)
Secures fixture to nominal 2" pipe
(2-3/8" horizontal O.D.)
Weight: 4 lbs.
NEMA TWISTLOCK PHOTOCONTROL (R)
Order separately (Not compatible with
finials or wall mount bishop arms)
Wall Mount Accessories
30-5/8" [777mm]
30-5/8" [777mm]
Radius
12"
[304mm]
2"
[51mm]
51-3/8"
[1306mm]
Radius
12"
[304mm]
2"
[51mm]
35-7/16"
[900mm]
51-3/8"
[1306mm]
11-3/4"
[298mm]
10-1/2"
[267mm]
28-1/2" [723mm]
BISHOP WALL MOUNT ARM
VA6101 (Modern), VA6150 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 16 lbs.
BISHOP WALL MOUNT ARM
WITH CROSS ROD
VA6102 (Modern), VA6151 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 17 lbs.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TRADITIONAL WALL MOUNT ARM
VA6103 (Modern), VA6152 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 17 lbs.
11-3/4"
[298mm]
28-1/2" [723mm]
TRADITIONAL WALL MOUNT ARM
WITH 45° STRAP
VA6104 (Modern), VA6153 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 18 lbs.
TD500023EN
2015-06-11 14:58:03