Invue
D ES C R IPTION
The EPIC Collection delivers custom luminaire flexibility with the quality
and availability expectations of standard specification grade product.
Offered in two styles, two housing sizes and hundreds of unique
combinations, the EPIC Collection can be dressed to suit any application.
Recognizing evolving environmental and legislative trends, the EPIC
Collection delivers world class optical solutions to the decorative
luminaire marketplace. The EPIC Collection offers targeted solutions for
full cutoff compliance, spill light control and path of egress illumination
while integrating the latest lamp technologies into visually comfortable
lighting solutions.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
TOP: Cast aluminum housing
attaches to cast aluminum
mounting arm hub with four
stainless steel fasteners. One-piece
silicone gasket between mounting
hub and top casting seals out
moisture and contaminants.
See mounting accessories
section for a full selection of
mounting arms. (Only these
arms are compatible wit the Epic
luminaire). MIDSECTION: The mid
section features cast aluminum
construction and stainless steel
assembly. SHADES: Heavy-gauge
precision spun aluminum shades
offer superior surface finish and
consistency in form. DOORFRAME
ASSEMBLY: Used with horizontally
lamped segmented optical
systems. Die-cast aluminum 1/8”
thick door and doorframe seal to
underside of shade with a thick
wall continuous silicone gasket.
Door hinges open via release
of two concealed quick release
fasteners. Impact resistant 1/8”
thick tempered flat or sag glass
lens seals to door with a one-piece
silicone gasket.
feature tool-less removal, quick
disconnect wiring plugs, and are
360° field rotatable.
Fin ish
El e c tri c a l
ELECTRICAL TRAY: Ballast and
related electrical componentry are
mounted to a reinforced one-piece
tray with integral handle. Quick
disconnect wiring plugs allow
easy tray removal during routine
maintenance.
O pti c a l
OPTICAL SYSTEMS: Choice of five
high efficiency segmented optical
systems constructed of premium
95% reflective anodized aluminum
sheet. Optical segments are rigidly
mounted inside a thick gauge
aluminum housing for superior
protection. All segment faces
are clean of rivet heads, tabs or
other means of attachment which
may cause streaking in the light
distribution. All reflector modules
Housing finished in a five-stage
premium TGIC polyester powder
coat paint, 2.5 mil nominal
thickness for superior protection
against fade and wear. Standard
colors include black, bronze, grey,
white, dark platinum, graphite
metallic and hartford green.
RAL and custom color matches
available. Consult your lighting
representative at Eaton for more
information.
ECL/EML
EPIC LARGE
70 - 400W
D IMENS IONS
Pulse Start Metal Halide
ECL Classical
EML Modern
Compact Fluorescent
Maximum
Height
25-5/8"
[650mm]
Maximum
Height
25"
[635mm]
DECORATIVE AREA LUMINAIRE
CERTIFICATION DATA
See configurations for more detailed information.
IP66 Rated
U.L. 1598 Listed
2G Vibration Tested
CSA Listed
40°C Ambient Temperature Rating
ISO 9001
EPA
Effective Projected Area: (Sq. Ft.)
Flat Lens 1.55
Sag Lens 1.75
SHIPPING DATA
Approximate Net Weight:
50 lbs. (23 kgs.)
C
ER
TEM
S
YS
D
Maximum Width
31-13/16" [808mm]
S
Maximum Width
31-13/16" [808mm]
TIFIE
TD500024EN
2015-06-11 14:58:18
ECL / E M L EPI C L A R G E
ORDER ING INFOR M A TION
Sample Number: ECL-400-MP-MT-3S-FG-SR-FL-BK-L
Product
Family 1
Lamp
Wattage 2
ECL=Epic
Classical
Large
EML=Epic
Modern
Large
Pulse Start
Metal Halide
150=150W
175=175W
250=250W
320=320W
350=350W
400=400W 3
Lamp Type
Voltage 7
Distribution
Lens Type
Mid Section Type
Shade Type
Color 11
MP=Pulse
Start
Metal
Halide
CF=Compact
Fluorescent 6
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
wired 277V 8
MT=Multi-Tap
wired 277V 9
TT=Triple-Tap
wired 347V 10
UNV=120-277V
Universal
Electronic
Ballast
2S=Type II Segmented
3S=Type III Segmented
4S=Type IV Segmented
5S=Type V Segmented
SL=Forward Throw
with Spill Light
Eliminator
Horizontal Lamp
FG=Flat Glass
SG=Sag Glass
SO=Solid
SR=Solid Rings
BL=Bell
FL=Flute
SN=Straight
Narrow
SW=Straight
Wide
AP=Grey
BZ=Bronze
BK=Black
DP=Dark
Platinum
GM=Graphite
Metallic
WH=White
Compact
Fluorescent
70=70W 4
84=(2) 42W 5
114=(2) 57W 5
Options (Add as Suffix)
Accessories (Order Separately) 15
CEC=California Title 20 Compliant Ballast
(Applies to 175-320W and 400W MP only)
F=Single Fuse
(120, 277 or 347V. Specify voltage)
FF=Double Fuse
(208, 240 or 480V. Specify voltage)
Q=Quartz Restrike 12
EM=Quartz Restrike with Time Delay
(Also strikes at cold start) 12
EM/SC=Quartz Emergency Separate Circuit 12
DS=Dual Fluorescent Switching Control 13
HS=House Side Shield 14
L=Lamp Included
Classical
VA6050-XX=Bishop Wall Mount Arm
VA6051-XX=Bishop Wall Mount Arm with Cross Rod
VA6052-XX=Traditional Wall Mount Arm
VA6053-XX=Traditional Wall Mount Arm with 45° Strap
VA6054-XX=Bishop Single Pole Mount Arm
VA6055-XX=Bishop Single Pole Mount Arm with Cross Rod
VA6056-XX=Bishop Twin Pole Mount Arm
VA6057-XX=Bishop Twin Pole Mount Arm with Cross Rods
VA6058-XX=Traditional Single Pole Mount Arm
VA6059-XX=Traditional Single Pole Mount Arm with Rounded Upper Bar
VA6060-XX=Traditional Single Pole Mount Arm with Rounded Lower Bar 16
VA6061-XX=Traditional Single Pole Mount Arm with 45° Upper Bar
VA6062-XX=Traditional Single Pole Mount Arm with 45° Lower Bar 16
VA6063-XX=Traditional Single Pole Mount Arm with 45° Upper Strap
VA6065-XX=Traditional Twin Pole Mount Arm
VA6066-XX=Traditional Twin Pole Mount Arm with Rounded Upper Bars
VA6067-XX=Traditional Twin Pole Mount Arm with Rounded Lower Bars 16
VA6068-XX=Traditional Twin Pole Mount Arm with 45° Upper Bars
VA6069-XX=Traditional Twin Pole Mount Arm with 45° Lower Bars 16
VA6070-XX=Traditional Twin Pole Mount Arm with 45° Upper Straps
VA6071-XX=Mast Arm Adapter
OA/RA1016=NEMA Twistlock Photocontrol - Multi-Tap
OA/RA1027=NEMA Twistlock Photocontrol - 480V
OA/RA1201=NEMA Twistlock Photocontrol - 347V
OA/RA1013=Photocontrol Shorting Cap
Accessory Options 17, 18
V=Victorian Finial
M=Modern Finial
A=Architectural Finial
N=Nostalgic Finial
R=NEMA Twistlock Photocontrol Receptacle 19
Modern
VA6001-XX=Bishop Wall Mount Arm
VA6002-XX=Bishop Wall Mount Arm with Cross Rod
VA6003-XX=Traditional Wall Mount Arm
VA6004-XX=Traditional Wall Mount Arm with 45° Strap
VA6005-XX=Bishop Single Pole Mount Arm
VA6006-XX=Bishop Single Pole Mount Arm with Cross Rod
VA6007-XX=Bishop Twin Pole Mount Arm
VA6008-XX=Bishop Twin Pole Mount Arm with Cross Rods
VA6009-XX=Traditional Single Pole Mount Arm
VA6010-XX=Traditional Single Pole Mount Arm with Rounded Upper Bar
VA6011-XX=Traditional Single Pole Mount Arm with Rounded Lower Bar 16
VA6012-XX=Traditional Single Pole Mount Arm with 45° Upper Bar
VA6013-XX=Traditional Single Pole Mount Arm with 45° Lower Bar 16
VA6014-XX=Traditional Single Pole Mount Arm with 45° Upper Strap
VA6016-XX=Traditional Twin Pole Mount Arm
VA6017-XX=Traditional Twin Pole Mount Arm with Rounded Upper Bars
VA6018-XX=Traditional Twin Pole Mount Arm with Rounded Lower Bars 16
VA6019-XX=Traditional Twin Pole Mount Arm with 45° Upper Bars
VA6020-XX=Traditional Twin Pole Mount Arm with 45° Lower Bars 16
VA6021-XX=Traditional Twin Pole Mount Arm with 45° Upper Straps
VA6022-XX=Mast Arm Adapter
NOTES:
1. Arm not included. Use with Invue brand arms. See accessories.
2. Standard with mogul-base socket for 175-400W MP. Standard with medium-base socket for MP lamps 150W and below.
3. 400W MP requires reduced envelope ED28 lamp.
4. Single 70W Compact Fluorescent lamp available with vertical optical systems only. 120V through 277V only.
5. Dual Compact Fluorescent lamp options available in Type 2S with 84 and 114W. Type 3S available in 84W only.
6. Compact Fluorescent ballasts are 120 through 277V. Specify with UNV voltage designation.
7. Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
8. Dual-tap is 120/277V wired 277V.
9. Multi-tap is 120/208/240/277V wired 277V.
10. Triple-tap is 120/277/347V wired 347V.
11. Custom and RAL color matching available upon request. Consult your lighting representative at Eaton for more information.
12. Quartz options not available with SL optic or vertical lamped optical systems.
13. Dual switching requires dual 42W or dual 57W Compact Fluorescent lamps. Allows independent switching control of each lamp through use of two electronic ballasts. Allows 50% power reduction when dual ballasts are
independently wired and controlled.
14. House side shield available on horizontally lamped 2S, 3S and 4S optical systems only.
15. Replace XX with color suffix.
16. Requires use of 4" O.D. round straight pole.
17. Add as suffix to accessory. Example: VA6009-BK-R.
18. Finials compatible with traditional arms only.
19. Not compatible with finials, bishop wall mount arms or pendant mounting.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TD500024EN
2015-06-11 14:58:18
ECL / E M L EPI C L A R G E
CONF IG UR A TIONS
HOUSING
MID SECTION
SHADE
FINIALS
Solid
3-7/8" H x 13-7/16" W
Classical
12-1/4" H x 12" W
Architectural
Straight Narrow
6-5/8" H x 30" W
Bell
9" H x 30" W
Modern
Solid Rings
3-7/8" H x 15-7/8" W
Modern
12-7/8" H x 12-1/4" W
Straight Wide
6-5/8" H x 30" W
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
Flute
8-7/16" H x 31-7/8" W
Nostalgic
TD500024EN
2015-06-11 14:58:18
ECL / E M L EPI C L A R G E
MOUNT ING A C C ES S OR IE S
Pole mount arms are designed to fit both large ECL/EML housings (Only these arms are compatible with the Epic luminaire). Arms feature a precision welded cast aluminum mounting
hub for attachment of fixture head to arm with four stainless steel fasteners. Wall mount arms compliment pole mount luminaires and attractively transition fixture scale in lower mounting
height pedestrian environments. Wall mount arms are designed to fit both large ECL/EML housings. Arms feature a precision welded cast aluminum mounting hub for attachment of
fixture head to arm with four stainless steel fasteners.
33-1/2" [852mm]
62" [1575mm]
33-1/2" [852mm]
2"
[51mm]
2"
[51mm]
54-3/16"
[1376mm]
BISHOP SINGLE POLE
MOUNT ARM
VA6005 (Modern), VA6054 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 24 lbs. E.P.A: 0.92
62" [1575mm]
Radius
12"
[304mm]
Radius
12"
[304mm]
Radius
12"
[304mm]
2"
[51mm]
54-3/16"
[1376mm]
BISHOP SINGLE POLE MOUNT ARM
WITH CROSS ROD
VA6006 (Modern), VA6055 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 25 lbs. E.P.A: 0.98
Radius
12"
[304mm]
54-3/16"
[1376mm]
BISHOP TWIN POLE MOUNT ARM
VA6007 (Modern), VA6056 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.43
2"
[51mm]
54-3/16"
[1376mm]
BISHOP TWIN POLE MOUNT
ARM WITH CROSS RODS
VA6008 (Modern), VA6057 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 39 lbs. E.P.A: 1.55
30-15/16" [786mm]
26-3/4" [679mm]
18-7/8"
[480mm]
35-7/8"
[911mm]
18-7/8"
[480mm]
35-7/8"
[911mm]
35-7/16"
[900mm]
26-3/4" [679mm]
30-15/16" [786mm]
TRADITIONAL SINGLE POLE
MOUNT ARM
VA6009 (Modern), VA6058 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 20 lbs. E.P.A: 0.86
26-3/4" [679mm]
26-3/4" [679mm]
30-15/16" [786mm]
30-15/16" [786mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH ROUNDED
UPPER BAR
VA6010 (Modern), VA6059 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.4
TRADITIONAL SINGLE POLE
MOUNT ARM WITH ROUNDED
LOWER BAR
VA6011 (Modern), VA6060 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 25 lbs. E.P.A: 1.16
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45° UPPER BAR
VA6012 (Modern), VA6061 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.38
30-15/16" [786mm]
26-3/4" [679mm]
18-7/8"
[480mm]
35-7/16"
[900mm]
18-7/8"
[480mm]
35-7/16"
[900mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
26-3/4" [679mm]
30-15/16" [786mm]
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45° LOWER BAR
VA6013 (Modern), VA6062 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 24 lbs. E.P.A: 1.17
TRADITIONAL SINGLE POLE
MOUNT ARM WITH 45° UPPER STRAP
VA6014 (Modern), VA6063 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 24 lbs. E.P.A: 1.17
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TRADITIONAL TWIN POLE
MOUNT ARM
VA6016 (Modern), VA6065 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 30 lbs. E.P.A: 1.44
TD500024EN
2015-06-11 14:58:18
ECL / E M L EPI C L A R G E
MOUNT ING A C C ES S OR IE S
57" [1448mm]
53-1/2" [1359mm]
26-3/4" [679mm]
35-7/16"
[900mm]
35-7/16"
[900mm]
18-7/8"
[480mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH ROUNDED
UPPER BARS
VA6017 (Modern), VA6066 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.28
35-7/16"
[900mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH ROUNDED
LOWER BARS
VA6018 (Modern), VA6067 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 40 lbs. E.P.A: 2.04
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45° UPPER BARS
VA6019 (Modern), VA6068 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.24
57" [1448mm]
53-1/2" [1359mm]
26-3/4" [679mm]
35-7/16"
[900mm]
18-7/8"
[480mm]
35-7/16"
[900mm]
8-3/8"
[211mm]
26-3/4" [679mm]
53-1/2" [1359mm]
57" [1448mm]
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45° LOWER BARS
VA6020 (Modern), VA6069 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 40 lbs. E.P.A: 2.0
NEMA
Photocontrol
Receptacle
TRADITIONAL TWIN POLE
MOUNT ARM WITH 45° UPPER STRAPS
VA6021 (Modern), VA6070 (Classical)
Slipfits over 4" round straight pole,
or 4" O.D. by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.81
NEMA
Photocontrol
Receptacle
8-3/8" [211mm]
MAST ARM ADAPTER
VA6022 (Modern), VA6071 (Classical)
Secures fixture to nominal 2" pipe
(2-3/8" horizontal O.D.)
Weight: 4 lbs.
NEMA TWISTLOCK PHOTOCONTROL (R)
Order separately (Not compatible with
finials or wall mount bishop arms)
Wall Mount Accessories
30-5/8" [777mm]
30-5/8" [777mm]
Radius
12"
[304mm]
2"
[51mm]
51-3/8"
[1306mm]
Radius
12"
[304mm]
2"
[51mm]
35-7/16"
[900mm]
51-3/8"
[1306mm]
11-3/4"
[298mm]
10-1/2"
[267mm]
28-1/2" [723mm]
BISHOP WALL MOUNT ARM
VA6001 (Modern), VA6050 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 16 lbs.
BISHOP WALL MOUNT ARM
WITH CROSS ROD
VA6002 (Modern), VA6051 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 17 lbs.
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TRADITIONAL WALL MOUNT ARM
VA6003 (Modern), VA6052 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 17 lbs.
11-3/4"
[298mm]
28-1/2" [723mm]
TRADITIONAL WALL MOUNT ARM
WITH 45° STRAP
VA6004 (Modern), VA6053 (Classical)
Mounts to wall with four stainless
steel lag bolts (provided by other).
Weight: 18 lbs.
TD500024EN
2015-06-11 14:58:18