Corelite INSTALLATION JUNCTION BOX STRUCTURE INTERFACE (Connection at Ceiling) Corelite luminaires are precision tooled for simple trouble free contractor installation. The Pendant/Cross-Bar Interface mounts directly to a standard 4" octagon junction box. Double Swivel Pendant Pipe Mounting DD_JB *FOR ALL CORELITE SUSPENDED LUMINAIRES MOUNT DETAILS POWER NON-POWER 4" OCTAGONAL BOX w/ CROSS SUPPORT (BY OTHERS) PENDANT WIRE (BY OTHERS) STRUCTURE SWIVEL BALL SWIVEL CROSSBAR 3/8" PENDANT 5" CANOPY 1/4 IPS NUT FULL SWIVEL COVER SWIVEL BALL FULL SWIVEL 3/8" PENDANT POWER (2-D) NON-POWER (2-D) APPROPRIATE HARDWARE TO STRUCTURE (BY OTHERS) CONNECTION AT CEILING 1. Layout mounting locations. 2. Ensure that power feed is at the UL end of the fixture. Power feed: to be installed to local/national electrical codes by a Certified Electrician. 3. Secure junction boxes to structure. 4. Secure cross bar to junction box. 5. Attach pendant to swivel ball and secure using 1/4" IPS lock nut. 6. Feed wires through pendant to allow access in junction box and connect wires ensuring all connections are properly matched. 7. Slide canopy up pendant and attach to swivel crossbar. NOMINAL ID FOR ¼ IPS = 9.5mm, 0.375 in. POWER WIRES CAN RUN THROUGH ANY PENDANT (REFER TO LOCAL/NATIONAL ELECTRICAL CODES). CONTACT CORELITE FOR CONNECTING POWER AT A JOINT FOR NAVIGATOR II. MOUNTS LOCATIONS* DISTANCES ARE EQUAL TO FIXTURE LENGTH PLUS OR MINUS DIMENSIONS BELOW FIXTURE FAMILY DIM "A" DIM "B" DIM "C" CLASS A - 1 1/8" - 1 1/8" 0" 0" FEROS - 1 1/8" - 1 1/8" 0" 0" RADIUS - 1 1/8" - 1 1/8" 0" 0" IRIDUM - 1 1/8" - 1 1/8" 0" 0" STELLAR - 2 3/8" - 2 3/8" 0" 0" RAVE 0" - 1 1/8" 0" - 1 1/8" 0" 0" 0" 0" + 5/8" - 5/16" 0" + 15/16" MINIGATOR NAVIGATOR II 1 COOPER Lighting SINGLE FIXTURE DIM "D" DIM "A" SAMPLE ROW DIM "B" DIM "C" *For continuous rows see joining sheet. Not all options available. Please consult your Cooper Lighting Representative for availability. Specifications and Dimensions subject to change without notice DIM "D" ADE080789 SS_JB Rev. A