Iris
DESCRIPTION
A LED module for use with separate control gear is suitable for
field replacement. The light emitting surface when combined
with primary optics produce diffuse light, ideal for downlighting
and wall washing applications. Available in various CRI, CCT and
lumen values. Use where color quality, consistency and optical
control are required.
Type
Catalog #
Project
Date
Comments
Prepared By
S P E C I F I C AT I O N F E AT U R E S
Mechanical
A Zhaga Book 3 compatible 50mm
diameter LED module with 19mm light
emitting surface (LES 19) intended to
attach to the heat sink of the luminaire.
Thermal Interface Material
Use with die cut graphite thermal
interface material (provided) to insure
effective heat transfer between the
LED module and heat sink.
Electrical Interface
Integral 2-pin connector provides
power to the LED array and mounts to
the heat sink assembly.
Optical
A high density LED array comprised
of multiple die on a ceramic substrate
(COB) with remote phosphors
providing a uniform source without
pixilation.
Available in 2700 and 3000 K in CRI 95
(minimum) with R9 values above 90.
Refer to ordering table for available
CRI/CCT combinations. Color accuracy
within 2 SDCM provides excellent
color uniformity and stability unit to
unit and over time.
Luminous Flux
Delivered module lumens are
dependent on various factors
including CRI, CCT, driver current
and thermal droop. All measurements
are based on given drive current
and tested at 85° C.
Compliance
cULus recognized and suitable for
damp locations. CE marked. Class
2 input only. Lumen maintenance
projections in accordance with IES
LM-80-08 and TM-21-11. Zhaga
compliant.
Warranty
5 year warranty when used in an
approved luminaires.
ZLM031920
LED Module
50mm Diameter
LES 19
2,000 Lumen Xicato
XTM Artist Series
1/4"
[6mm]
2"
[50mm]
1/8"
[3mm]
5 PLACES
1-3/8"
[35mm]
TD520018EN
12-3-2015
Iris
O R D E R I N G I N F O R M AT I O N
Example:
C o n f i g u ra t i o n
LES
ZLM03
19
ZLM03 = LED module,
Zhaga Book 3 compatible
Luminous Flux
19 = 19mm light emitting surface
CRI/CCT
20 = 2,000 lumen series
A927 = 95 CRI minimum, 2700 K CCT
A930 = 95 CRI minimum, 3000 K CCT
Catalog
Number
D ri ve
C u rre n t
Luminous Flux
Category
Minimum
Luminous Flux
Nominal
CCT
Z L M 0 3 19 2 0 A 9 2 7
10 5 0
2000
18 0 0
2000
2700 K
Z L M 0 3 19 2 0 A 9 3 0
10 5 0
2000
18 0 0
2000
3000 K
CRI
LES
C a te g o r y
Light
E m i tt i n g
S u r fa c e
97
L E S 19
19.0mm
S P E C T R A L P OW E R D I ST R I B U T I O N Color rendering index (CRI) is an incomplete metric for many source technologies, especially LED. It is possible to
over state CRI for LED sources without improving the color rendering across the visible spectrum. Consider CRI, spectral
power distribution (SPD) and real world performance to determine suitability for a gi ven application.
Z L M 0 3 19 2 0 A 9 2 7
C o l o r Pe r f o rm a n c e
Spec t r al Pow er Di s t r i but i on
Color rendering index (CRI) is an incomplete metric for
many source technologies, especially LED. It is possible to
over state CRI for LED sources without improving the color
rendering across the visible spectrum. Consider CRI, spectral
power distribution (SPD) and real world performance to
determine suitability for a gi ven application.
Ra
R1
R2
R3
R4
R5
R6
R7
R8
R9
R 10
R 11
R12
R13
R14
97
96
99
98
94
96
97
98
97
95
98
91
95
97
97
C o l o r A c c u ra c y
C I E x y C h r o m a t i c i t y D i a g r a m w i t h B l a ck B o d y C u r v e , L E D A N S I
Specifications and 2-step MacAdam Ellipse
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
Color accuracy greatly exceeds ANSI and Energy Star specifications for
u n i f o r m i t y. I n i t i a l c o l o r t e m p e r a t u r e i s w i t h i n 2 S D C M a n d m a i n t a i n e d w i t h i n
3 SDCM over rated life.
TD520018EN
12-3-2015
Iris
S P E C T R A L P OW E R D I ST R I B U T I O N Z L M 0 3 19 2 0 A 9 3 0
C o l o r Pe r f o rm a n c e
Sp ec t r al Pow er Di s t r i but i on
Color rendering index (CRI) is an incomplete metric for
many source technologies, especially LED. It is possible to
over state CRI for LED sources without improving the color
rendering across the visible spectrum. Consider CRI, spectral
power distribution (SPD) and real world performance to
determine suitability for a gi ven application.
Ra
R1
R2
R3
R4
R5
R6
R7
R8
R9
R 10
R 11
R12
R13
R14
98
98
99
98
98
98
97
98
98
98
99
98
88
98
98
C o l o r A c c u ra c y
C I E x y C h r o m a t i c i t y D i a g r a m w i t h B l a ck B o d y C u r v e , L E D A N S I
Specifications and 2-step MacAdam Ellipse
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
Color accuracy greatly exceeds ANSI and Energy Star specifications for
u n i f o r m i t y. I n i t i a l c o l o r t e m p e r a t u r e i s w i t h i n 2 S D C M a n d m a i n t a i n e d w i t h i n
3 SDCM over rated life. Color over angle also within xx SDCM.
TD520018EN
12-3-2015