Name:
Date:
Gavilan College AMT 111
Aircraft Electrical Systems
Worksheet #1
1.
Points: 23
is a document that shows information on wire size and
terminal type and can be found in the
2. Name two types of diagrams that are used for troubleshooting electrical systems.
&
3. A bonded group of insulated wires is called a
4. What process is used to prevent surface oxidation on bare copper wire?
5. The insulation property that measures the resistance to current leakage is called?
6. The ability of an insulator to withstand voltage differences is called?
7. What reference is first used for guidance when making a wire substitution?
8. The standard for wiring size is?
9. Which has a larger diameter, 0 or 1 gauge wire?
10. Which has greater current carrying capability, a wire in a bundle or the same wire in free air?
11. The allowable voltage drop for a wire, with continuous operation in a 28 volt system, is?
12. The maximum distance between cable labels is?
13. Wire at terminal lugs should have sufficient slack to allow?
14. Splicing of a coaxial cable requires what type of data?
15. What is the maximum number of splices between connectors?
16. The minimum bend diameter of a wire bundle is?
17. Wire should be routed (below or above) fluid lines.
18. The maximum distance between wire clamps is?
19. What should be used to protect wire passing through a bulkhead?
20. Electrically connecting conductive objects to create a return path for a circuit is called?
21. Grounding and bonding connection resistance shouldn’t exceed?
22. The maximum number of terminal lugs connected to a stud is?
23. A stud’s bus bar (is or isn’t) counted when determining the maximum number of lugs.
Page 1 of 1