Hazardous Area LED Lighting
Champ® VMV LED Luminaires
Champ® VMV
LED luminaires for hazardous areas
3,000 to 25,000 lumen LED high bay luminaires
Champ® VMV LED
Safe.
Reliable.
Efficient.
Featuring the industry's broadest range of LED
luminaires for harsh, hazardous and industrial
environments, Eaton's Crouse-Hinds can
deliver a lighting solution that performs reliably
in even the worst operating conditions. All the
while reducing your energy, maintenance and
manpower costs.
Why LED?
Why Crouse-Hinds?
Useful life
Rated life is up to 60,000
hours of maintenance-free
and safe operation
Rugged design
Built to withstand extreme
temperatures, vibration,
water and dust
Energy efficiency
LED average energy
consumption is significantly
less than traditional
fluorescent and HID fixtures
High efficacy
Up to 124 lumens per watt
(model dependent)
Start/restart time
Instant illumination versus 10
minute restrike time for HID
Light quality
Higher color rendering
compared to fluorescent
and HID
Environmental benefits
Mercury-free LED eliminates
disposal costs and lower
energy consumption for a
smaller carbon footprint
2
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
Thermal management
Effective heat sinking
ensures longer life
Quality of light
Custom optics designed to
maximize light distribution
and intensity
Versatile mounting
LED fixtures are compatible
with Crouse-Hinds' HID
installed base
Why Champ VMV LED?
Rugged mid to high bay solutions. Champ VMV LED luminaires
are engineered to provide maintenance-free operation while
delivering long life and high lumen performance.
Built to last:
Type 4X rated
•
•
Impact-resistant lens sealed
from the outside environment
provides ingress protection
against water and dust
•
Die cast aluminum LED
housing provides efficient
thermal path to heat sink
assembly
•
Vertical fin design facilitates air
flow and dust shedding
VMV3L-VMV11L
optimized for 8-30 foot
mounting heights
Simple installation and
replacement:
• Contractor-friendly design is
ideal for both retrofit and new
construction
•
Easy to retrofit using existing
HID Champ mounting module
•
Compact modular design for
easy component replacement
and future upgrades
•
Available with lever lock
connectors and standard
three-pole terminal block
VMV13L & VMV17L
VMV21L & VMV25L
Custom optics:
• Type I, III and V optics
designed to maximize light
distribution and intensity*
optimized for 30-60 foot
mounting heights
Increased efficiency and
durability:
• Up to 124 lumens per watt
•
Economic life: 7-20 years
* Type V optics standard.
VMV7L vs. 175 Watt MH
LED vs. HID
savings at a glance
Why are so many
facilities making the
switch from HID to LED?
The numbers say it all.
64%
64% REDUCTION IN
ENERGY COSTS
75%
75% LOWER TOTAL
COST OF OWNERSHIP
100%
100% MAINTENANCE
REDUCTION
Assumptions: Calculations based on overall life of the LED system. Energy cost of $.09 per kilowatt; 24 hour
per day operation; labor rate of $75 each for 2 workers; average time for fixture maintenance of 1 hour.
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
3
Custom optics
Eaton’s Crouse-Hinds
continuously focuses
on engineering product
solutions tailored to our
customers' unique needs
and applications.
Champ VMV LED
luminaires feature custom
optics designed to
maximize light distribution
and intensity, providing
flexibility for retrofits
or new installations
throughout the site.
Type III optics minimize light spillover onto the walls and direct light to the ground.
Three optical options to maximize light distribution and intensity
Type I
VMV3L - VMV11L
TYPE I
TYPE III
Long and rectangular for
hallways, walkways, loading
docks, catwalks.
Wall mount light
distribution, minimizing
spillover on the wall.
Ideal for:
• Mining conveyor belts
• Aisleways and hallways
Ideal for:
• Narrow crosswalks or
passages with wall mounted
fixtures
• Catwalks and walkways
• Tunnels with wall mount
• Ramps and loading docks
• Wall or stanchion mount
requiring 180° forward throw
beam patterns
• Tunnels with overhead
mounts
Colored LED options:
• Available in red, blue, green and amber*
• Reduction in light pollution for night space observation and sky
glow due to isolating blue wavelength in red and amber colors
• Wildlife-friendly
• Improves visibility for telescopes in observatories during night sky
space exploration
* Custom optics not available with colored LEDs. One model per color, see assignment sheet.
4
Type III
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
Type V
TYPE V
Regular circular distribution
pattern for high/low bay
indoor and outdoor ceiling
or pendant mount lighting.
Ideal for:
• Pendant, ceiling or stanchion
mount overhead building
mounts
• Processing mills, industrial
plants, large buildings,
warehouses, etc.
Case study: Type I optics
Catwalk/conveyor lighting
Utilizing Eaton’s Crouse-Hinds
lighting layout services, Champ
VMV luminaires with Type I
optics and HID luminaires are
shown installed on a catwalk to
compare photometrics.
Champ® Gen III w/ Type I Optics
VMV7L Type I Optics
MH=8 ft.
VMV7L Type I Optics
MH=8 ft.
4 ft.
22 ft.
60 ft.
Comparison
Champ Type I LEDs have a
wider linear pattern than
equivalent HID luminaires
and provide more efficient
light dispersion, which fully
illuminates the catwalk.
Results
VMV7L Type I Optics
MH=8 ft.
175W Metal Halide w/ Type I Optics
VMVM175 PS Type I Optics
MH= 8 ft.
VMVM175 PS Type I Optics
MH= 8 ft.
VMVM175 PS Type I Optics
MH= 8 ft.
4 ft.
22 ft.
Champ VMV LED with Type
I optics provides superior
illumination along the conveyor
and walkway safely. With no
gaps in illumination, the optical
pattern allows for increased
spacing of fixtures and a safer
conveyor system.
Luminaire
Calc. Type
Units
Avg.
Max.
Min.
Avg./Min.
Max./Min.
Champ VMV
Illuminance
Fc
26.91
36.9
17.4
1.55
2.12
Savings realized
175W MH
Illuminance
Fc
14.32
18.0
7.9
1.81
2.28
•
Champ Type I pattern allows
for greater fixture spacing
along the catwalk or conveyor
system
•
Increased visibility with no
dark spots results in safer
conditions for workers
•
LED system provides between
7 to 20 years of maintenancefree operation
•
Up to 64% energy savings
over the life of the fixture
60 ft.
Champ VMV has broader coverage area, higher delivered footcandles
and uniformity for a typical catwalk or conveyor application.
Champ VMV with Type I optics
Broad coverage maximizes luminaire spacing
and prevents dark spots
Lighting layout &
design services:
Let us help you design
your next big project!
Contact Crouse-Hinds
Customer Service
crousecustomerctr
@eaton.com
(866) 764-5454
175W HID with
Type I optics
Lack of coverage
results in dark spots
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
5
Champ VMV Series LED Luminaires
LED system lifetime rated versus economic life:
Champ VMV Series LEDs are designed to provide full-spectrum,
crisp, white light with custom IES Type I, III and V distribution.
Wattage
Lumens
per watt
Equivalent
HID
luminaire
Typical
energy
savings /
lifetime
3,531
29
122
70W-100W
Up to 77%
VMV5L
5,335
43
124
100W-150W
Up to 67%
VMV7L
7,195
62
116
150W-175W
Up to 67%
VMV9L
9,266
85
109
250W-320W
Up to 74%
VMV11L
11,440
113
101
320W-400W
Up to 74%
VMV13L
13,226
130
102
400W
Up to 68%
VMV17L
18,793
168
112
400W-600W
Up to 72%
VMV21L
22,110
196
113
600W-750W
Up to 74%
VMV25L
26,531
232
114
750W-1000W
Up to 77%
Model
Typical
lumens
(Type V)*
VMV3L
* Tolerance +/- 10%.
Applications:
• For areas with mounting heights of 8-60 feet
• Oil and gas refineries, drilling rigs, petrochemical facilities, food
and beverage facilities, platforms, loading docks, tunnels, indoor/
outdoor spotlighting, outdoor wall and stanchion mounted general
area lighting, and where flammable vapors, gases, ignitable dusts,
fibers or flyings are present
• Locations requiring continuous and consistent light levels in
extreme ambient temperatures
• Where extremely corrosive, wet, dusty, hot and/or cold conditions
exist
• Classified and hazardous locations
Economic life can range anywhere between 64,000 to 200,000 hours,
or 7 to 20 years of maintenance-free operation.
Fixture life and years of maintenance-free operation
Ambient
temperature
Fixture life
(hours)
No. of years at
24 hours usage
No. of years at
12 hours usage
25°C
201,008
23
46
30°C
153,445
17
35
40°C
94,949
11
22
55°C
64,286
7
15
* 50,000 hrs of life at 65°C ambient for VMV3L-VMV11L/UNV1 models.
Fixture life:
• Rated life of 60,000 hours @ 55°C operating ambient and 24/7
continuous operation for 365 days
• Economic life of 200,000 hours @ 25°C ambient
• L70 >300,000 hours @ 55°C
Champ VMV benefits:
• Instant illumination and restrike
• Cold temperature operation / no warm-up required
• Option for redundancy in drivers with multiple series circuits
connected to each driver to avoid complete loss of illumination
Drivers
Option
Voltage: VMV3L-VMV25L
/UNV1
120-277 VAC, 50/60 Hz; 108-250 VDC, 50/60 Hz
/UNV34
347-480 VAC, 50/60 Hz
• Easy installation - compact modular fixture attaches onto existing
Champ mounting module
• Energy-efficient technology - up to 64% energy savings over HID
fixtures
• Contains no mercury or other hazardous substances
• Shock- and vibration-resistant solid-state luminaires have no
filaments or glass components that could break - greatly reduces
the risk of premature failure
• Operating ambient: -40°C to 65°C (VMV3L-VMV11L/UNV1
models); -40°C to 55°C (VMV3L-VMV11L/UNV34 and
VMV13L-VMV25L models)
Standard materials:
• Lamp housing and adapter - die cast aluminum with Corro-free™
epoxy powder coat
• Lens - heat- and impact-resistant glass
• Gaskets - silicone
• External hardware - stainless steel
• Factory-sealed, no external seals required
• 5 year fixture warranty†
† Refer to page 2 of the D-0914 authorized distributor price book for Crouse-Hinds
standard Terms and Conditions.
Qualifications and compliances:
• DesignLights Consortium® Qualified
(some models are not DLC qualified)*
LED system:
• High intensity discrete power emitters
• Standard: cool white (5000K, 70 CRI)
Optional: warm white, (3000K, 80 CRI)
• Custom Type I, III and V optics available
* Approved models include: VMV3L/UNV1; VMV5L/UNV1; VMV7L/UNV1; VMV9L/UNV1;
VMV11L/UNV1; VMV13L/UNV1; VMV17L/UNV1; VMV21L/UNV1; VMV25L/UNV1; VMV3L/
UNV34; VMV5L/UNV34; VMV7L/UNV34; VMV9L/UNV34; VMV11L/UNV34.
• Optics clocking in field to align Type I and Type III light patterns to
illumination path for VMV13L-VMV25L
Refer to www.designlights.org Qualified Products List under family models for full listing
details. Not all models are approved for all application categories.
6
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
Certifications and compliances:
Electrical ratings:
VMV3L
VMV5L
VMV7L
VMV9L
Voltage range, VAC
120-277
120-277
120-277
120-277
Frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
• Zone 21 tb
Input power (watts)
29
43
62
85
113
• Simultaneous Presence
Input amps at
120-277 VAC
0.24-0.11
0.35-0.16
0.52-0.23
0.71-0.31
0.95-0.41
• Wet Locations, Type 4X, IP66
Voltage range, VDC
108-250
108-250
108-250
108-250
108-250
Power factor
>0.90
>0.90
>0.90
>0.90
>0.90
<20%
<20%
<20%
<20%
<20%
3,531
5,335
7,195
9,266
11,440
NEC and CEC
• Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, nA nR;
Class II, Groups E, F, G; Class III
UL Standards
• UL844; UL1598 Luminaires; UL1598A Marine; UL8750; UL50;
UL50E
Total harmonic
distortion (THD)
Nominal lumens†
(Type V)
VMV11L
120-277
CSA Standard
• cUL Listed to CSA Standard CSA C22.2 No. 137
VMV13L
VMV17L
VMV21L
VMV25L
Voltage range, VAC
120-277
120-277
120-277
• IEC 60079-0:2011; IEC 60079-15:2010; IEC 60079-31:2008;
IEC 60598-2-1:1979; IEC 60529:2001
Frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Input power (watts)
131
168
196
232
• Ex nA nR IIC T* Gc -40 to +40
Input amps at
120-277 VAC
1.08-0.48
1.40-0.62
1.64-0.73
1.94-0.87
• Ex nA nR IIC T* Gc -40 to +55
Voltage range, VDC
108-250
108-250
108-250
108-250
• Ex nA nR IIC T* Gc -40 to +65
Power factor
>0.90
>0.90
>0.90
>0.90
<20%
<20%
<20%
<20%
13,226
18,793
22,110
26,531
IEC**
• Ex tb IIIC T*°C Db -40 to +40
Total harmonic
distortion (THD)
Nominal lumens†
(Type V)
• Ex tb IIIC T*°C Db -40 to +55
• Ex tb IIIC T*°C Db -40 to +65
120-277
† Tolerance +/- 10%.
VMV3L-VMV11L only
• IECEx UL 13.0052X
VMV13L-VMV25L only
• IECEx UL 14.0031X
Weights:
Luminaire
lbs.
kg.
• EN 60079-0:2012; EN 60079-15:2010; EN 60079-31:2009;
EN 60598-2-1:1989; EN 60929:1991 +A1:2001
VMV3L-VMV11L
21.8
8.07
VMV13L & VMV17L
36.0
16.32
•
II 3 G Ex nA nR IIC T* Gc -40 to +40
VMV21L & VMV25L
44.0
19.95
•
II 3 G Ex nA nR IIC T* Gc -40 to +55
•
II 3 G Ex nA nR IIC T* Gc -40 to +65
Mounting module
lbs.
kg.
•
II 2 D Ex tb IIIC T*°C Db IP66 -40 to +40
Pendant
1.25
0.57
•
II 2 D Ex tb IIIC T*°C Db IP66 -40 to +55
Cone pendant
4.00
1.81
•
II 2 D Ex tb IIIC T*°C Db IP66 -40 to +65
Flexible pendant
1.50
0.68
VMV3L-VMV11L only
Ceiling
2.75
1.25
• DEMKO 13 ATEX 1475031X; DEMKO 13 ATEX 1305741X
Wall
4.50
2.04
Angled stanchion*
3.50
1.59
Straight stanchion
4.50
2.04
ATEX/CE**
VMV13L-VMV25L only
• DEMKO 14 ATEX 1324722X; DEMKO 14 ATEX 2274231X
* Angled stanchion for VMV3L-VMV11L models only.
* See temperature code table below.
** VMV3L-VMV11L/UNV1 rated to +65°C, VMV13L-VMV25L and
VMV3L-VMV11L/UNV34 rated to +55°C.
Class III, Div. 1
Temperature codes:
Simultaneous
rating
Class I, Zone 2
Class II, Div. 1,
Groups E, F, G
Lamp/lumen output
Driver type
Ambient
temperature
Class I, Div. 2
Class II, Div. I
Class I, Div. 2,
Div. 1
AEx nA nR; Ex
nA nR
Zone 21 AEx tb
IIIC
3L, 5L, 7L, 9L, 11L
/UNV1
40°C
T5
T5
T3C
T6
T66°C
3L, 5L, 7L, 9L, 11L
/UNV1
55°C
T5
T4A
T3A
T5
T83°C
3L, 5L, 7L, 9L, 11L
/UNV1
65°C
T4A
T4A
T3A
T4
T92°C
3L, 5L, 7L, 9L, 11L
/UNV34
40°C
T3C
T5
T3C
T4
T70°C
3L, 5L, 7L, 9L, 11L
/UNV34
55°C
T3A
T4A
T3A
T4
T85°C
13L, 17L
/UNV1; UNV34
40°C
T4A
T5
T4A
T6
T66°C
13L, 17L
/UNV1; UNV34
55°C
T4
T4A
T4
T5
T81°C
21L, 25L
/UNV1; UNV34
40°C
T4A
T5
T4A
T6
T71°C
21L, 25L
/UNV1; UNV34
55°C
T4
T4A
T4
T5
T86°C
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
7
Ordering information
Part number example
VMV17LW2AR1G/UNV1 S890
Suffixes
Lamp/function
3L
3,531 Lumen LED
S812*
Trunnion Mount Kit with Pin
5L
5,335 Lumen LED
S831**
Safety Cable
7L
7,195 Lumen LED
S890
Quick Clip
9L
9,226 Lumen LED
S891**
Diffused Lens
11L
11,440 Lumen LED
S892***
Redundant Driver
13L
13,226 Lumen LED
S896**
Teflon Coated Lens
17L
18,793 Lumen LED
S903
Polycarbonate Lens
21L
22,110 Lumen LED
TB6
Six-pole Terminal Block
25L
26,531 Lumen LED
RL*
Red (3,200 Lumen LED)
GL*
Green (4,300 Lumen LED)
BL*
Blue (2,100 Lumen LED)
AL*
Amber (5,000 Lumen LED)
* Order with ceiling mount only.
** Not available for IEC.
*** Available for 5L & 7L only. Redundant
driver standard on 9L - 25L models.
7L = 6,616 lumens with S892 suffix.
Voltage
* Custom optics not available with
colored LEDs.
/UNV1
120-277 VAC, 50/60 Hz;
108-250 VDC, 50/60 Hz
/UNV34
347-480 VAC, 50/60 Hz
Color temperature
BLANK
Cool (5000K), Colored
W
Warm (3000K)
Guard
BLANK
No Guard
G
P3001 Wire Guard
Optics
Mounting style
BLANK
No Cover
2C
¾” Ceiling
J*
1-½” Stanchion, 25° Angled
3C
1” Ceiling
P
1-½” Stanchion, Straight
20C
20mm Ceiling
2A
¾” Pendant
25C
25mm Ceiling
3A
1” Pendant
2HA
¾” Flexible Pendant
20A
20mm Pendant
2TW
¾” Wall
25A
25mm Pendant
3TW
1” Wall
2B
¾” Cone Pendant
20TW
20mm Wall
3B
1” Cone Pendant
25TW
25mm Wall
* For VMV3L-VMV11L only.
BLANK
Type V Optic Standard (All Mounts)
R1
Type I Optic (All Mounts Minus Ceiling)
R1A*
Type I Optic (Ceiling with Conduit 45° Counterclockwise or 135° Clockwise from Hinge)
R1B*
Type I Optic (Ceiling with Conduit 45° Clockwise or 135° Counterclockwise from Hinge)
R3
Type III Optic (All Mounts Minus Ceiling)
R3AP*
Type III Optic (Select when using Appleton® Top Hat Adapter with Champ Fixture)
R3A1*
Type III Optic (Ceiling with Conduit 45° Counterclockwise from Top Hat Hinge)
R3A2*
Type III Optic (Ceiling with Conduit 135° Clockwise from Top Hat Hinge)
R3B1*
Type III Optic (Ceiling with Conduit 45° Clockwise from Top Hat Hinge)
R3B2*
Type III Optic (Ceiling with Conduit 135° Counterclockwise from Top Hat Hinge)
* For VMV3L-VMV11L only.
Accessories (ordered separately)
D2S20
Photocell, 120V, 50/60 Hz
D2S208 277
Photocell, 208-277V
VMVL S812 K1*
Trunnion Mount Kit with Pin
* Order with ceiling mount only.
8
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
Mounting options and dimensions
Stanchion - 25° Angled
Stanchion - Straight
Pendant
Ceiling
Wall
Cone Pendant
Trunnion
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
9
Photometric comparison at 15 ft. mounting height
175W PSMH - Type I
VMV7L - Type I
Type I optical pattern
0.25
0.50
1.0
2.5
5.0
Calculation summary
175W PSMH - Type III
Label
Calc. type (in Fc)
Avg.
Max.
Min.
VMV 175W MH Grid
Illuminance
0.45
2.8
0.0
VMV LED Grid
Illuminance
0.62
8.0
0.0
VMV7L - Type III
Type III optical pattern
0.25
0.50
1.0
2.5
5.0
Calculation summary
175W PSMH - Type V
Label
Calc. type (in Fc)
Avg.
Max.
Min.
VMV 175W MH Grid
Illuminance
0.53
3.2
0.1
VMV LED Grid
Illuminance
0.61
7.5
0.0
VMV7L - Type V
Type V optical pattern
0.50
1.0
2.5
5.0
10.0
Calculation summary
Higher average footcandles,
uniformity and distribution
coverage with less than half
the lumens and energy
consumption compared to
175W metal halide
Label
Calc. type (in Fc)
Avg.
Max.
Min.
VMV 175W MH Grid
Illuminance
0.51
2.8
0.1
VMV LED Grid
Illuminance
0.69
10.1
0.0
Actual lumens
(nominal†)
VMV3L
VMV5L
VMV7L
VMV9L
VMV11L
Type I
3,360
5,045
6,844
8,823
10,730
Type III
3,309
4,468
6,741
8,618
10,660
Type V
3,531
5,335
7,195
9,266
11,440
Actual lumens
(nominal†)
VMV13L
VMV17L
VMV21L
VMV25L
Type I
12,842
18,194
21,404
25,685
Type III
12,493
17,699
20,822
24,987
Type V
13,266
18,793
22,110
26,531
† Tolerance +/- 10%.
10
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
Notes:
EATON'S CROUSE-HINDS SERIES Champ® VMV LED Luminaires
11
U.S. (global headquarters):
Eaton's Crouse-Hinds business
1201 Wolf Street
Syracuse, NY 13208
Canada
Toll Free: 800-265-0502
FAX: (800) 263-9504
FAX Orders only: (866) 653-0645
Middle East (Dubai)
971 4 8066100
FAX: 971 4 8894813
chmesales@eaton.com
Korea
82-2-3484-6783
82-2-3484-6778
CCHK-sales@
cooperindustries.com
Mexico/Latin America/Caribbean
52-555-804-4000
FAX: 52-555-804-4020
ventascentromex@eaton.com
Singapore
65-6645-9888
FAX: 65-6297-4819
chsi-sales@
cooperindustries.com
Australia
61-2-8787-2777
FAX: 61-2-9609-2342
CEASales@
cooperindustries.com
Europe (Germany)
49 (0) 6271 806-500
49 (0) 6271 806-476
sales.CCH.de@
cooperindustries.com
China
86-21-2899-3600
FAX: 86-21-2899-4055
cchsales@
cooperindustries.com
India
91-124-4683888
FAX: 91-124-4683899
cchindia@
cooperindustries.com
(866) 764-5454
FAX: (315) 477-5179
FAX Orders Only:
(866) 653-0640
crousecustomerctr@eaton.com
For more information:
If further assistance is
required, please contact
an authorized Eaton
Distributor, Sales Office,
or Customer Service
Department.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 5123-0216
February 2016
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.