Series A2000, LP2000 & CB2000
Single Row Terminal Blocks
A20110807WR
SPECIFICATIONS
Rating: A2: 30A, 300V*
LP2: 30A, 150V*
CB2: 30A, 300V*
Center Spacing: 0.375” or 3/8” (9.52mm)
Wire Range: #12-22 AWG Cu
Screw Size: #6-32 zinc-plated philslot
LP202110
Torque Rating: 9 lb-in.
Base: Standoffs standard for easy flux washing
Distance Between Barriers: 0.32” (8.1mm)
Recommended PCB Hole Diameter: 0.076” (1.93mm)
Operating Temperature: 105°C (221°F) max., -40°C (-40°F) min.
Molded Material: Black, UL Rated 94V0 Thermoplastic
Breakdown Voltage: 3400V (A2 & LP2); 4100V (CB2).
Agency Information: UL File E62622, CSA File 47235;
IEC Compliance; CE Certified
*30A Rating achieved with a #10 copper wire crimped to a ring terminal.;
20A Rating without ring terminal.
CB20210507
Dimensions - in (mm)
A2000 & LP2000 Series
Poles
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Edge Connectors,
One-Sided Boards
Wire Management
Products
Power Distribution
Blocks
Terminal Blocks:
Panel & Rail Mount
EuroMag Series
Terminal Blocks:
Single & Double Row
Terminal Blocks - Single Row
MOUNTING
ENDS
ONLY
A
C
Mount Ctrs.
Length
1.13
1.50
1.88
2.25
2.63
3.00
3.38
3.75
4.13
4.50
4.88
5.25
5.63
6.00
6.38
6.75
7.13
7.50
7.88
8.25
8.63
9.00
9.38
9.75
10.13
10.50
10.88
11.25
11.63
–
–
1.56
1.93
2.30
2.68
3.06
3.43
3.81
4.18
4.56
4.93
5.31
5.69
6.06
6.43
6.81
7.18
7.56
7.93
8.31
8.68
9.06
9.43
9.81
10.18
10.56
10.93
11.31
11.68
12.05
–
–
BARRIER &
MOUNTING
ENDS
B
Pole Ctrs.
0.38
0.75
1.13
1.50
1.88
2.25
2.63
3.00
3.38
3.75
4.13
4.50
4.88
5.25
5.63
6.00
6.38
6.75
7.13
7.50
7.88
8.25
8.63
9.00
9.38
9.75
10.13
10.50
10.88
11.25
11.63
BARRIER
ENDS
ONLY
C
Length
0.81
1.18
1.56
1.93
2.31
2.68
3.06
3.43
3.81
4.18
4.56
4.93
5.31
5.68
6.06
6.43
6.81
7.18
7.56
7.93
8.31
8.68
9.06
9.43
9.81
10.18
10.55
10.93
11.31
11.68
12.05
0.375
(9.53)
0.15
(3.8)
Ø
0.65
(16.5)
C
Mount End
Barrier End
0.76 (19.3)
0.565 (14.35)
on LP2000
0.40
(10.2)
0.02
(0.5)
B Pole Centers
A Mount Centers
Mount End
Barrier End
CB2000 Series
0.375
(9.53)
0.19
(4.8)
Ø
0.32
(8.1)
0.70
(17.8)
C
Mount End
Barrier End
* Dimensions in inches. To convert to millimeters, multiply by 25.4.
Compliance
References
0.60
(15.2)
0.02
(0.5)
B Pole Centers
A Mount Centers
Mount End
10
For additional product information, visit www.bussmann.com
Barrier End
Terminal Blocks - Single Row
Terminal Blocks:
Single & Double Row
Series A2000 & LP2000
Single Row Terminal Blocks
Part Numbering System
Base/End
Poles
Screw Options
Options
nn
n
nn
nnnn
nnn
Blank - std. screw
00 - screws shipped bulk
03* - stainless steel
04 - brass nickel-plated
07 - steel SEMS
(not available
with hardware options)
09* - brass SEMS
nickel-plated
(not available with
hardware options)
CA** - captive screw
WR - wire ready
(not available on LP2
series)
AB* - angle mnt. options (pg 13)
A1 to A9 - 0.250˝ QC
B1 to B9 - 0.187˝ QC
DR* - drilled right angle (pg 13)
L1 to L6 marking options (pg 27)
MP* mounting plates (pg 13)
RC* - retaining clips (pg 13)
R30 to R77 - right angle bends (pg 13)
S1* - solder lug/flat
JA***, JB*** & JC*** - barrier jumpers
OJ2*** & OJ4*** - over barrier jumpers
(not available w/covers)
A2 - standard barrier 01* - handwired
LP2 - low profile
02 - printed circuit
barrier
03 - non feed-thru
04 - wire wrap tail
06 - handwired
07 - extended pin
08 - printed circuit
09 - 0.250˝ QC short
10 - 0.187˝ QC
14 - printed circuit
19 - 0.250˝ QC long
1 - std. base/mnt. end 02 to 32
2 - std. base/barrier end 02 to 30 on mount
3 - insulator base/mnt. end
end base
4 - insulator base/
barrier end
5 - closed base/
mount end
6 - closed base/
molded mount end
*A2 only.
**Not compatible with 03-stainless steel screws.
***Contact factory for configuration.
Terminal Styles
Inches (Millimeters)
0.55
(14.0)
0.20
(5.1)
0.110
(2.79)
0.031
(0.79)
01
Handwired
0.062
(1.57)
03
Non Feed-Thru
0.031
(0.79)
0.11
(2.79)
0.055
(1.40)
0.14
(3.6)
0.17
(4.3)
0.032
(0.81)
0.031
(0.79)
0.33
(8.4)
0.72
(18.3)
09
0.250˝ QC short
0.30
(7.62)
0.31
(7.9)
0.187
(4.75)
10
0.187˝ QC
0.250
(6.35)
0.031
(0.79)
Compliance
References
0.42
(10.7)
0.031
(0.79)
0.40
(10.2)
0.062
(1.57)
08
Printed Circuit
07
Extended Pin
06
Handwired
04
Wire Wrap Tail
0.031
(0.79)
0.125
(3.2)
14
Printed Circuit
0.062
(1.57)
0.031
(0.79)
Edge Connectors,
One-Sided Boards
0.54
(13.7)
0.30
(7.6)
0.062
(1.57)
0.031
(0.79)
02
Printed Circuit
Wire Management
Products
0.55
(14.0)
0.031
(0.79)
Covers - (pg 28)
Power Distribution
Blocks
Base/End Note: 6
style not available with
covers. 5 & 6 Styles
only available with 03
terminals.
Terminal Blocks:
Panel & Rail Mount
Terminal Style
EuroMag Series
An
2
n
Ln
P n
2
n
Series
0.250
(6.35)
19
0.250˝ QC long
For additional product information, visit www.bussmann.com
11
EuroMag Series
Terminal Blocks:
Single & Double Row
Terminal Blocks - Single Row
Series A2000 & LP2000
Single Row Terminal Blocks Continued
Screw Options
Standard
Zinc-plated Steel
(F505-J)
(Bulk ordering part numbers are in parentheses)
03
Stainless Steel
(F507-J)
FIG 1
Wire Management
Products
Power Distribution
Blocks
Terminal Blocks:
Panel & Rail Mount
Hardware Options
04
Brass
Nickel-Plated
(F506-J)
WR
Wire Ready
09
Brass SEMS
Nickel-Plated
(F524-J)
Inches (Millimeters)
(Bulk ordering part numbers are in parentheses)
Jumpers
Solder Lugs
07
Steel SEMS
(F523-J)
Quick Connects
Blade Width A = 0.250” Blade Width B = 0.187”
0.68 (17.3)
0.33 (8.4)
FIG 1
0.84 (21.2)
FIG 2
FIG 1
†JA
(JA2-02-J)
S1
(2S1-J)
†OJ2
(OJ2-J)
A1 & B1
(2A1-J & 2B1-J)
A2 & B2
(2A2-J & 2B2-J)
A3 & B3
(2A3-J & 2B3-J)
†OJ4
(OJ4-J)
A4 & B4
(2A4-J & 2B4-J)
A5 & B5
(2A5-J & 2B5-J)
A6 & B6
(2A6-J & 2B6-J)
A7 & B7
(2A7-J & 2B7-J)
A8 & B8
(2A8-J & 2B8-J)
A9 & B9
(2A9-J & 2B9-J)
0.33 (8.4)
FIG 2
FIG 3
FIG 2
†JB
(JB2-02-J)
FIG 1
0.33 (8.4)
FIG 3
†JC
(JC2-02-J)
†Contact factory for configuration.
FIG 2
FIG Base/End
1
Options
FIG 1
FIG3 4
FIG
FIG 2
Inches (Millimeters)
Mount End Details
B
Edge Connectors,
One-Sided Boards
B
FIG 4
FIG 3
FIG
2 - Standard
base/barrier end
FIG
45
1 - Standard base/mount end
FIG 2
0.180 (4.57)
0.150 Ø (3.8)
mounting holes (2)
FIG 3
0.218 (5.54)
0.30
(7.62)
0.30
(7.62)
3 - Insulator base/mount end
FIG 5
FIG 4
Compliance
References
B
FIG 3
5 - Closed base/mount end
FIG 6
125
FIG
FIG 4
0.40
(10.2)
4 - Insulator base/barrier end
FIG 6
FIG 5
0.40
(10.2)
0.095
(2.4)
SECTION A–A
SECTION B–B
FIG 4
6 - Closed base/molded mount end
6
Molded Mount End
FIG 6
For additional product information, visit www.bussmann.com
FIG 5
1, 3 & 5
Mount End
B
Terminal Blocks - Single Row
Terminal Blocks:
Single & Double Row
Series A2000 & LP2000
Single Row Terminal Blocks Continued
Mounting Options
Right Angle Bends (A2, LP2 only)
07 Terminal Bend Configurations
EuroMag Series
Right angle terminals are offered on the A2000 & LP2000 Series. Configurations
are defined in these dimensions: X = pin extension beyond the block base; Z
= length from block base to centerline of the terminal tip. Standard bends
consist of the X and Z dimensions shown in the chart. Specify by adding the
selected Bend Option Code to the terminal part number.
Z
04 Terminal Bend Configurations
0.82
X
Z
Bend
Option
Code
Bend
Option
Code
X
X
(minimum)
0.04
0.01
0.02
0.05
0.08
0.12
0.14
0.16
Available
w/insulator
base
0.28
0.23
0.22
0.19
0.16
0.12
0.10
0.08
No
No
No
No
No
No
No
No
R30
R35
R36
R42
R46
R50
R53
R66
R69
R75
R77
0.04
0.01
0.02
0.08
0.12
0.16
0.19
0.32
0.35
0.41
0.43
Z
Available
w/insulator
base
0.55
0.50
0.49
0.43
0.39
0.35
0.32
0.19
0.16
0.10
0.08
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
Power Distribution
Blocks
R30
R35
R36
R39
R42
R46
R48
R50
Z
X
(minimum)
Dimensions in inches. To convert to millimeters, multiply by 25.4.
Drilled Right Angle (A2, LP2 only)
Angle Brackets (A2, LP2 only)
Wire Management
Products
0.12
5
0.32
0.25
0.04
0.45
0.144 HOLE
w/0.312 C' BORE
0.32
0.15
Option DR
Counterbored holes across mount ends of
block enable fastening with two screws at
right angles to normal mount position.
Mounting Plates
Retaining Clip
Edge Connectors,
One-Sided Boards
Option AB
Angle brackets enable block to be fastened
at right angles to normal mount position.
Bulk part number 2AB-J.
MOUNTING
PLATE
Terminal Blocks:
Panel & Rail Mount
0.55
MP
MT
RETAINING CLIP
Compliance
References
Option
MP Metal inserts with 0.150” dia. hole
accept #6 screw. Bulk part number 2MP-J.
Option RC
Use on standoff tubes. Fit panels up to
0.125” thick. Two clips for every five
positions. Supplied unassembled. Bulk part
number H541-J.
For additional product information, visit www.bussmann.com
13
Edge Connectors,
One-Sided Boards
Wire Management
Products
Power Distribution
Blocks
Terminal Blocks:
Panel & Rail Mount
EuroMag Series
Terminal Blocks:
Single & Double Row
Terminal Blocks - Single Row
Series CB2000
Single Row Terminal Blocks
Part Numbering System
Series
Cn
Bn
2
n
Terminal Style
nn
Base/End
n
Poles
nn
Screws
nn n n
nnn
CB2 - closed back
01 - handwired
02 - printed circuit
07 - extended pin
14 - printed circuit
1 - mount end
2 - barrier end
02 to 32
02 to 30 on mount
end base
07 -
AB** - angle mounting brackets (pg 15)
A7 to A9 - 0.250” QC
B7 to B9 - 0.187” QC
EB - exit back terminals
EF - exit front terminals
L1 to L6 marking options (pg 27)
LT1 to LT6 marking options (pg 27)
MP mtg. plates (pg 15)
S1 - solder lug/flat
JA***, JB*** & JC*** - barrier jumpers
OJ2*** & OJ4*** - over barrier jumpers
Covers - (pg 28)
steel SEMS
standard
09 - brass SEMS
nickel-plated
CA - captive screw
07CA - SEMS captive
**Only available on 3-poles and up.
***Contact factory for configuration..
Terminal Styles
0.40
(10.2)
0.18
(4.6)
0.045
(1.14)
01
Handwired
0.125
(3.18)
0.70
(17.8)
0.18
(4.6)
0.031
(0.79)
0.062
(1.57)
02
Printed Circuit
Screw Options
07
Steel SEMS
zinc-plated
(B001-7084-J)
Inches (Millimeters)
0.19
(4.8 )
0.031
(0.79)
0.120
(3.05)
Options
0.031
(0.79)
0.18
(4.6)
0.045
(1.14)
07
Extended Pin
0.18
(4.6)
0.031
(0.79)
14
Printed Circuit
(Bulk ordering part numbers are in parentheses)
09
Brass SEMS
nickel-plated
(F524-J)
* NOTE: Wire ready screws standard on all terminal styles.
CB2 Terminal Exit Options
Inches (Millimeters)
Compliance
References
0.255
(6.48)
0.18
(4.6)
Exit Rear (std.)
14
0.18
(4.6)
EF Exit Front
X
EB Exit Back
For additional product information, visit www.bussmann.com
Terminal Blocks - Single Row
Hardware Options
Inches (Millimeters)
(Bulk ordering part numbers are in parentheses)
Jumpers
Solder Lugs
Terminal Blocks:
Single & Double Row
Series CB2000
Single Row Terminal Blocks
Quick Connects
Blade Width A = 0.250”. Blade Width B = 0.187”.
0.68 (17.3)
0.84 (21.2)
S1
(2S1-J)
†OJ2
(OJ2-J)
†JA
(JA2-XX-J)
A7 & B7
(2A7-J & 2B7-J)
A8 & B8
(2A8-J & 2B8-J)
A9 & B9
(2A9-J & 2B9-J)
EuroMag Series
0.33 (8.4)
0.33 (8.4)
Terminal Blocks:
Panel & Rail Mount
†JB
(JB2-XX-J)
†OJ4
(OJ4-J)
0.33 (8.4)
†JC
(JC2-XX-J)
†Contact factory for configuration..
Power Distribution
Blocks
Mounting Options
Inches (Millimeters)
Right Angle Mounting Bracket
End Positions
usable
0.71
(18.0)
Snap-in Angle Bracket
Chassis
or PCB
A
0.79
(20.1)
1.02
(25.8)
Exit Back (EB)
Terminals
0.24
(6.1)
Wire Management
Products
#6 or #8
mounting
screw & nut
(Customer
supplied.)
0.45
(11.4)
A
0.42
(10.7)
Angle
Bracket
Option AB
Edge Connectors,
One-Sided Boards
Mounts blocks on PC boards at a right angle.
• Protects solder joints.
• Recommended for all EB (Exit Back) PCB terminal blocks.
• Bracket snaps securely on block (no hardware required).
• Minimum strip length (end positions are usable).
• Mount with #6-32 or #8-32 screws (not supplied).
Mounting Plates
MP
Compliance
References
MOUNTING
PLATE
Option MP
MP Metal inserts with 0.150” dia. hole accept #6 screw.
Bulk part number 2MP-J.
MT
MT8
For additional product information, visit www.bussmann.com
15