Bussmann® Modular Fuseblocks 1BS102 0-600V, 400 Amps CATALOG SYMBOL: 1BS102 VOLTAGE RATING: 600V CURRENT RATING: 400A BASE: Molded black phenolic, 150°C MOUNTING STUDS: Zinc-plated steel ⁄Ω¢∑ - 20 ≈ ⁄Ω™∑ hex head bolt NUT: Zinc-plated steel WASHER: Zinc-plated steel ⁄Ω¢∑ Belleville washer CONNECTOR: Tin-plated aluminum WIRE RANGE: Single #6AWG through two 250MCM WIRE TYPES: Copper or aluminum Stranded or solid AGENCY APPROVALS: UL Recognized, Guide No. IZLT2, File No. E14853 CSA Certified, Class Pending WITHSTAND RATING: 200,000A RMS. SYM. or the interrupting rating of the fuse used, whichever is smaller. TORQUE REQUIREMENTS: Conductor Set Screw: 275 lbs-in Fuse Mounting Bolt: 120 lbs-in Mounting Dimensions mm (inches) Catalog No. FWA 70A-100A FWH 125B-200B FWX 125A-200A KBC 110-200 70-100CJ 125-200M09C 250-400P09C* JJS 110-200 “A” 50.3 70.4 61.2 94.0 92.2 111.3 111.3 63.5 “B” (`1.98) (2.77) (2.41) (3.70) (3.63) (4.38) (4.38) (2.50) 8.9 29.0 19.8 52.6 50.8 69.9 69.9 22.1 “C” (0.35) (1.14) (0.78) (2.07) (2.00) (2.75) (2.75) (0.87) 167.9 188.0 178.8 211.6 209.8 228.9 228.9 181.1 (6.61) (7.40) (7.04) (8.33) (8.26) (9.01) (9.01) (7.13) *When used in multiple pole configurations, 19.05 (.750) should be maintained between adjacent moldings when mounting the fuses indicated. 14.0 CLEARANCE FOR (.55) SCREW HEAD 32.3 (1.27) CL 57.2 (2.25) 6.9 9.9 X MOUNTING HOLE SLOT FOR 1/4" SCREW (.27) (.39) 15.0 (.59) 41.4 (1.63) 'A' REF. 7.9 (.31) 250 MCM-6 CU-AL 64.3 (2.53) 48.3 (1.90) 42.4 (1.67) 35.6 (1.40) 20.8 (.82) 79.50 (3.130) 12.7 (.50) 'B' REF. 79.50 (3.130) 'C' REF. 79.50 (3.130) 8.4 (.33) 6.4 (.25) 6.76 DIA. (.266) 79.50 (3.130) 32.23 (1.269) CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. MOUNTING HOLE ARRANGEMENT The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-16-98 SB98107 Rev. A Form No. 1BS102 Page 1 of 1 BIF DOC #1207