Pauluhn™ Meridian FCM Engineered for marine interior applications Marine lighting Pauluhn

Marine lighting
Pauluhn™ Meridian FCM fluorescent luminaire
Pauluhn™ Meridian FCM
Engineered for marine interior applications
Pauluhn Meridian FCM luminaires are designed for a variety of uses
for marine interiors, including passageways and corridors.
Applications:
•
Surface mount cornice applications and under cabinet mounting
•
Marine interiors, including corridors, passageways and stairwells
Key features & benefits:
•
Multi-voltage electronic ballast resistant to brownouts or voltage
and frequency fluctuations
•
Wraparound lens design provides the proper balance of side and
direct lighting
•
Tool-less entry for easy relamping
•
Available with toggle switch and convenience outlet
•
Filter tube options allow colored lamps to operate on a separate
circuit for darken ship mode
•
Optional self-contained emergency battery back-up ballasts with
test switch
•
Optional long life T5 lamps available upon request (consult factory)
Certifications:
•
Conforms to IP52
•
Marine Inside Drip Proof Type
•
ABS
•
UL1598A Luminaires for
Marine Vessels
•
UL924 Emergency Lighting
Equipment
Materials:
Housing and reflector:
• Type 5052H32 aluminum with
white polyester powder coat
Lens:
DR acrylic, translucent white
•
Lamp
wattage
Ballast/socket
type
ANSI lamp
code
Starting
temp.
Max.
ambient
Supply
wire
17
T8 bi-pin G13
F17-T8
0°F / -18°C
55°C
90°C
32
T8 bi-pin G13
F32-T8
-20°F / -29°C
55°C
90°C
14/28
T5 mini bi-pin G5
F14/F28-T5
0°F / -18°C
55°C
90°C
24/54
T5HO mini bi-pin G5
F24/F54-T5HO
-20°F / -29°C
55°C
90°C
Entries:
(2) ½” and (2) ¼”NPT
knockouts on the housing;
(1) NPT knockout on each end
•
Lamp holder:
Polycarbonate
•
Technical specifications:
Terminal block:
• 2-pole
Ballast:
120-277V 50/60 Hz and
electronic, except F20 and
F40 T12 bi-pin which are 120V
60 Hz
•
Emergency battery back-up
ballast:
• Optional, self-contained 90
minute minimum for all lamp
types. 120 minute minimum
for F32T8 one lamp. Starting
temperature 32ºF/0ºC.
Convenience outlet
Optional 125V 3-wire, 2-pole
U-ground (inside type only)
•
Switch
Optional double pole toggle
switch
•
Mounting options:
•
Ceiling or wall type, through
the luminaire
Ordering information
Part number
FCM114
FCM214
FCM117
FCM217
FCM120
FCM220
FCM124
FCM224
Nominal
length
Lamp type
No. of
lamps/
nominal
lamp
wattage
Nominal
length
Lamp type
No. of
lamps/
nominal
lamp
wattage
2 ft.
2 ft.
2 ft.
2 ft.
2 ft.
2 ft.
2 ft.
2 ft.
F14T5
F14T5
F17T8
F17T8
F20T12
F20T12
F24T5HO
F24T5HO
1 x 14W
2 x 14W
1 x 17W
2 x 17W
1 x 20W
2 x 20W
1 x 24W
2 x 24W
FCM254
4 ft.
4 ft.
4 ft.
4 ft.
4 ft.
4 ft.
4 ft.
4 ft
F28T5
F28T5
F32T8
F32T8
F40T12ES
F40T12ES
F54T5HO
F54T5HO
1 x 28W
2 x 28W
1 x 32W
2 x 32W
1 x 34W
2 x 34W
1 x 54W
2 x 54W
Description
Suffix
Description
Emergency battery back-up ballast, 1 lamp, 277V max.,
test switch
Emergency battery back-up ballast, high lumen, 1 lamp,
277V max., test switch
Lamps
Long life lamps (F54T5HO only)
Double pole toggle switch
Convenience outlet (not for drip proof areas)
-225***
220V 50 Hz (T12 bi-pin only)
-226***
220V 60 Hz (T12 bi-pin only)
277V 60 Hz (T12 bi-pin only)
Dimming ballast (not available for F20T12)
Weight
(lbs.)
7.0
7.0
7.0
7.0
8.5
8.5
7.0
7.0
Part number
FCM128
FCM228
FCM132
FCM232
FCM140
FCM240
FCM154
Weight
(lbs.)
12.0
12.0
12.0
12.0
15.0
15.0
12.0
12.0
Options
Suffix
EMT2*
EMT3*
L**
LL**
SW
CO
-276***
DIM
*For T5 and T5HO, EM ballast is fixed voltage, 120 or 277V, 50/60 Hz.
**Lamps are not included unless option “L” or “LL” is specified.
***Not available with “CO” option.
Dimensions
Eaton’s Crouse-Hinds
1201 Wolf Street
Syracuse, NY 13208
Crouse-Hinds.com
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 5297-0416
April 2016
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.