Eaton
1121 Highway 74 South
Peachtree City, GA 30269
tel: (770) 486-4800
Date
For Release
Contact
March 10, 2015
Immediately
Karin Martin, (630) 513-8625
Eaton’s Halo LED Recessed Downlights Add Versatility, Up to 73 Percent
Energy Savings to Slope Ceiling Applications
PEACHTREE CITY, Ga. … Power management company Eaton today announced the
introduction of the Halo® ALLSLOPE light-emitting diode (LED) Downlight System, adding
more high-performing, energy-saving products to its recessed downlighting offering.
Featuring unique interchangeable beam-forming optics, full range dimming and numerous
color temperatures and trim options, the HL6 downlights are specifically designed for slope
ceiling applications to fulfill residential, hospitality, retail and institutional needs.
“The Halo ALLSLOPE LED downlights offer customers a high-efficiency, energy-saving
solution, offering up to 73 percent in energy savings with virtually no maintenance,” said Mark
Eubanks, president, Eaton’s Cooper Lighting Division. “The innovative design for pitched
ceilings allows the LED lamp module full adjustment capability so it can be aimed straight
down in accordance with the ceiling pitch, resulting in outstanding performance and
appearance.”
The Halo LED ALLSLOPE recessed downlight system is specifically designed for slope
ceilings with pitch aiming from 2/12 (10 degrees) to 12/12 (45 degrees). The three-piece
system consists of a choice of a 6-inch aperture housing, available in 1200 lumens or 1800
lumens, an LED light engine module with three interchangeable optics and a trim selection
from a full line of compatible trims including reflectors, baffles and lens choices.
– more –
Eaton/Page 2
The high efficacy LED downlights deliver up to 90 lumens per watt and are offered in 2700K,
3000K, 3500K and 4000K correlated color temperatures with a high color quality 90 color
rendering index, satisfying California’s Title 24 compliance. The unique interchangeable
beam-forming optics are available in Narrow Flood (25 degrees), Flood (40 degrees) and
Wide Flood (55 degrees) options, which offer the ability to select a cone of light (beam angle)
in proportion to the ceiling height. The aiming mechanism allows 360 rotation and locks the
LED light module in place in accordance to the pitch.
The ALLSLOPE LED downlights offer dimming capability and are designed to last 50,000
hours. Depending on the selected housing, these AIR-TITE™, ENERGY-STAR®-certified
products consume only 19 watts or 27 watts of energy, replacing comparable 70 watt and
100 watt traditional reflector lamp sources. The products offer up to 73 percent in energy
savings over the fixture’s lifespan (based on six hours daily use at $0.115/kilowatt hour).
The fixtures incorporate Halo’s contractor-friendly installation features including Got Nail!™
bar hangers with pre-installed nail and integral T-grid clip, Slide-N-Side™ wire traps and
quick-connects for tool-less wiring outside the junction box, as well as the Pass-N-Thru™ bar
hanger feature for tool-less shortening of bars without removal from the frame. The products
are damp location listed with a wet location listing for showers and outdoor covered patios
using lens trims.
For more information on Eaton’s lighting solutions, visit www.eaton.com/lighting.
Eaton delivers a range of innovative and reliable indoor and outdoor lighting solutions, as well
as controls products specifically designed to maximize performance, energy efficiency and
cost savings. Eaton lighting solutions serve customers in the commercial, industrial, retail,
institutional, residential, utility and other markets.
Eaton’s electrical business is a global leader with expertise in power distribution and circuit
protection; backup power protection; control and automation; lighting and security; structural
solutions and wiring devices; solutions for harsh and hazardous environments; and
engineering services. Eaton is positioned through its global solutions to answer today’s most
critical electrical power management challenges.
– more –
Eaton/Page 3
Eaton is a power management company with 2014 sales of $22.6 billion. Eaton provides
energy-efficient solutions that help our customers effectively manage electrical, hydraulic and
mechanical power more efficiently, safely and sustainably. Eaton has approximately 102,000
employees and sells products to customers in more than 175 countries. For more
information, visit www.eaton.com.
###