D/I Extrusions
D/I Extrusions
Versatility. Scalability. Capability.
Corelite’s extensive lines of Direct/Indirect Extruded product
families infallibly provide the simple solution to complex
spaces. The Element, Loft, Vertechs, Traverse and Navigator
families of luminaires offer versatile lighting solutions for
modern architectural spaces with their innovative uplight and
downlight control features and unique scalability between
fixtures. All D/I Extrusion fixtures provide both task and
ambient illumination, while offering elegant styling, extruded
aluminum housings and up to five unique media options.
Corelite’s D/I Extrusions also provide the ideal platform for
the revolutionary Slide-N-Lock™ adjustable optics, as well
as the cutting-edge Smart Environment control system.
1
ELEMENT
pg. 3-4
ELEMENT MICRO
pg. 5-6
LOFT
pg. 7-8
LOFT MICRO
pg. 9-10
VERTECHS
pg. 11-12
TRAVERSE
pg. 13-14
NAVIGATOR II
pg. 15-16
MINIGATOR
pg. 17-18
2
Element
SUSPENDED | DIRECT-INDIRECT / SEMI-INDIRECT | T5 / T5HO / T8
A minimal rectilinear profile with
dedication to innovative optical
controls is the essence of Element.
E2-WM with standard die-cast end caps
Micro Prismatic
Lens (E2-WM)
Cross Blade Parabolic
Louver (E2-WB)
RPerformance™
Louver (E2-WH)
Concave Metallic
Perf (E2-WC)
Slide-N-Lock™
(pages 19-20)
Lamp Isolators
(pages 19-20)
Day-Sense
2Sense
Ř)LYHGRZQOLJKWPHGLDRSWLRQV
Ř53HUIRUPDQFHŠ/RXYHUPHHWV53UHTXLUHPHQWV
Ř6OLGH1/RFNŠRSWLFVZLWKILHOGDGMXVWDEOHVHWWLQJV
Ř/DPS,VRODWRUNLWV
Ř'D\6HQVHLQWHJUDOGD\OLJKWVHQVRUDQG6HQVHLQWHJUDO
daylight/occupancy sensor
Element Wall
3
High Efficiency
Louver (E2-WW)
SUSPE NDE D E L E ME NT
ORDERING INFORMATION:
SAMPLE NUMBER:E2-WM-2N5-1C-UNV-AC48-T1-12
6-3/4" [171MM]
SERIES
E2=Element Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
B=Cross Blade Parabolic Louver
C=Concave Metallic Perf
H=RPerformance™ Louver
M=Micro Prismatic Lens
W=High Efficiency Louver
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
Louvers: Cross Blade and RPerformance™ are
continuous semi-specular aluminum. Perf is
semi-specular material, perforated section is
15% open with 0.062” diameter holes and opal
diffuser. High Efficiency is continuous highly
reflective painted white aluminum.
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0” and 12’-0” centers. Refer to
installation section for various ceiling interface
details and rigid pendant mounting details.
OPTICS UP
W=White
S=Specular
NUMBER OF LAMPS
1=1 Lamp (N5, T5)
2=2 Lamps (N5, T5, T8)
3=3 Lamps (N5, T5)
SUSPENDED
2-1/2" [64MM]
Construction: Housing is 6063 T5 aluminum
extrusion forming a 7-1/2” x 2-1/2” rectilinear
profile. Standard 4’-0”, 8’-0” and 12’-0” fixture
lengths combine for continuous runs.
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
WIRING*
C=Standard Circuit
D=Dimming
E=Emergency
B=Battery Pack
T=Nightlight
Y=Daylight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
-Rigid Pendant
12”, 15”, 18”, 21”, 24” or 27”
(additional pendant lengths available, consult factory)
48”
96”
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
OPTIONS
Slide-N-Lock™ (page 20-21)
DL1=95% Downlight
DL5=75% Downlight
DL2=90% Downlight
DL6=70% Downlight
DL3=85% Downlight
DL7=65% Downlight
DL4=80% Downlight
DL8=60% Downlight
Lamp Isolator Kits* (page 20-21)
DL/UDU=2 lamps up 1 lamp down
DL/DUD=2 lamps down 1 lamp up
DL/UXU=2 lamps up
DL/DXD=2 lamps down
DL/XDX=1 lamp down
DL/XUX=1 lamp up
Dimensions do not include
end plates or caps
DS=Day-Sense Integral Daylight Sensor
2S=2Sense Integral Daylight/Occupancy Sensor
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
4
Element Micro
SUSPENDED | DIRECT-INDIRECT | T5 / T5HO / T8
The Element Micro offers
maximized performance in a
modern micro-scaled package.
E1-WM with standard die-cast end caps
Micro Prismatic
Lens (E1-WM)
Ř+LJKO\HIILFLHQWPLFURSULVPDWLFOHQV
Element Micro Wall
5
SUSPE NDE D E L E ME NT MI CR O
ORDERING INFORMATION:
SAMPLE NUMBER:E1-WM-2N5-1C-UNV-AC48-T1-12
5-1/4" [133MM]
SERIES
E1=Element Micro Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
M=Micro Prismatic Lens
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
OPTICS UP
W=White
S=Specular
NUMBER OF LAMPS
1=1 Lamp (N5, T5, T8)
2=2 Lamps (N5, T5)
SUSPENDED
2-1/2" [64MM]
Construction: Housing is 6063 T5 aluminum
extrusion forming a 5-1/4” x 2-1/2” rectilinear
profile. Standard 4’-0”, 8’-0” and 12’-0” fixture
lengths combine for continuous runs.
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
WIRING*
C=Standard Circuit
D=Dimming
E=Emergency
B=Battery Pack
T=Nightlight
Y=Daylight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0” and 12’-0” centers. Refer to
installation section for various ceiling interface
details and rigid pendant mounting details.
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
48”
96”
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
Dimensions do not include
end plates or caps
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
6
Loft
SUSPENDED | DIRECT-INDIRECT / SEMI-INDIRECT | T5 / T5HO / T8
The exceptionally versatile Loft
takes efficiency and modern design
sophistication to new heights.
L2-WM with standard die-cast end caps
Micro Prismatic
Lens (L2-WM)
Cross Blade Parabolic
Louver (L2-WB)
RPerformance™
Louver (L2-WH)
Concave Metallic
Perf (L2-WC)
Slide-N-Lock™
(pages 19-20)
Lamp Isolators
(pages 19-20)
Day-Sense
2Sense
Ř)LYHGRZQOLJKWPHGLDRSWLRQV
Ř53HUIRUPDQFHŠ/RXYHUPHHWV53UHTXLUHPHQWV
Ř6OLGH1/RFNŠRSWLFVZLWKILHOGDGMXVWDEOHVHWWLQJV
Ř/DPS,VRODWRUNLWV
Ř'D\6HQVHLQWHJUDOGD\OLJKWVHQVRUDQG6HQVH
integral daylight/occupancy sensor
Loft Wall
7
High Efficiency
Louver (L2-WW)
SUSPE NDE D L O FT
ORDERING INFORMATION:
SAMPLE NUMBER:L2-WM-1T5-1C-UNV-AC48-T1-12
7-1/2" [191MM]
SERIES
L2=Loft Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
B=Cross Blade Parabolic Louver
C=Concave Metallic Perf
H=RPerformance™ Louver
M=Micro Prismatic Lens
W=High Efficiency Louver
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
Louvers: Cross Blade and RPerformance™ are
continuous semi-specular aluminum. Perf is
semi-specular material, perforated section is
15% open with 0.062” diameter holes and opal
diffuser. High Efficiency is continuous highly
reflective painted white aluminum.
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0” and 12’-0” centers. Refer to
installation section for various ceiling interface
details and rigid pendant mounting details.
OPTICS UP
W=White
S=Specular
NUMBER OF LAMPS
1=1 Lamp (N5, T5)
2=2 Lamps (N5, T5, T8)
3=3 Lamps (N5, T5)
SUSPENDED
2-1/2" [64MM]
Construction: Housing is 6063 T5 aluminum
extrusion forming a 7-1/2” x 2-1/2” angled
profile. Standard 4’-0”, 8’-0” and 12’-0” fixture
lengths combine for continuous runs.
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
WIRING*
C=Standard Circuit
D=Dimming
E=Emergency
B=Battery Pack
T=Nightlight
Y=Daylight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
-Rigid Pendant
12”, 15”, 18”, 21”, 24” or 27”
(additional pendant lengths available, consult factory)
48”
96”
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
OPTIONS
Slide-N-Lock™ (page 20-21)
DL1=95% Downlight
DL5=75% Downlight
DL2=90% Downlight
DL6=70% Downlight
DL3=85% Downlight
DL7=65% Downlight
DL4=80% Downlight
DL8=60% Downlight
Lamp Isolator Kits* (page 20-21)
DL/UDU=2 lamps up 1 lamp down
DL/DUD=2 lamps down 1 lamp up
DL/UXU=2 lamps up
DL/DXD=2 lamps down
DL/XDX=1 lamp down
DL/XUX=1 lamp up
Dimensions do not include
end plates or caps
DS=Day-Sense Integral Daylight Sensor
2S=2Sense Integral Daylight/Occupancy Sensor
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
8
Loft Micro
SUSPENDED | DIRECT-INDIRECT | T5 / T5HO / T8
The Loft Micro combines
maximized performance with a
uniquely minimalistic profile.
L1-WM with standard die-cast end caps
Micro Prismatic
Lens (L1-WM)
Ř+LJKO\HIILFLHQWPLFURSULVPDWLFOHQV
Loft Micro Wall
9
SUSPE NDE D L O FT MI CR O
ORDERING INFORMATION:
SAMPLE NUMBER:L1-WM-1T5-1C-UNV-AC48-T1-12
Construction: Housing is 6063 T5 aluminum
extrusion forming a 5-7/8” x 2-1/2” angled
profile. Standard 4’-0”, 8’-0” and 12’-0” fixture
lengths combine for continuous runs.
SERIES
L1=Loft Micro Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
M=Micro Prismatic Lens
2-1/2" [64MM]
5-7/8" [149MM]
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
OPTICS UP
W=White
S=Specular
NUMBER OF LAMPS
1=1 Lamp (N5, T5, T8)
2=2 Lamps (N5, T5)
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
SUSPENDED
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
WIRING*
C=Standard Circuit
D=Dimming
E=Emergency
B=Battery Pack
T=Nightlight
Y=Daylight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0” and 12’-0” centers. Refer to
installation section for various ceiling interface
details and rigid pendant mounting details.
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
48”
96”
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
Dimensions do not include
end plates or caps
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
10
Vertechs
SUSPENDED | DIRECT-INDIRECT / SEMI-INDIRECT | T5 / T5HO / T8
Vertechs embodies the twenty-first
century demands of architecturally
attractive and efficient design.
VB-WB with standard die-cast end caps
Micro Prismatic
Lens (VB-WM)
Cross Blade Parabolic
Louver (VB-WB)
RPerformance™
Louver (VB-WH)
Concave Metallic
Perf (VB-WC)
Slide-N-Lock™
(pages 19-20)
Lamp Isolators
(pages 19-20)
Day-Sense
2Sense
Ř)LYHGRZQOLJKWPHGLDRSWLRQV
Ř53HUIRUPDQFHŠ/RXYHUPHHWV53UHTXLUHPHQWV
Ř6OLGH1/RFNŠRSWLFVZLWKILHOGDGMXVWDEOHVHWWLQJV
Ř/DPS,VRODWRUNLWV
ŘDay-Sense integral daylight sensor and 2Sense integral
daylight/occupancy sensor
Vertechs Wall
11
High Efficiency
Louver (VB-WW)
SUSPE NDE D V E RTE CHS
ORDERING INFORMATION:
SAMPLE NUMBER:VB-WB-2T8-1C-UNV-AC48-T1-32’-DL5
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
2-1/2" [64MM]
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
9" [229MM]
Louvers: Cross Blade and RPerformance™ are
continuous semi-specular aluminum. Perf is
semi-specular material, perforated section is
15% open with 0.062” diameter holes and opal
diffuser. High Efficiency is continuous highly
reflective painted white aluminum.
SERIES
VB=Vertechs Suspended
OPTICS UP
W=White
S=Specular
OPTICS DOWN
B=Cross Blade Parabolic Louver
C=Concave Metallic Perf
H=RPerformance™ Louver
M=Micro Prismatic Lens
W=High Efficiency Louver
NUMBER OF LAMPS
1=1 Lamp (N5, T5)
2=2 Lamps ((N5, T5, T8)
3=3 Lamps (N5, T5)
SUSPENDED
Construction: Housing is 6063 T5 aluminum
extrusion forming a 9”x2-1/2” rectangular
profile. Standard 4’-0”, 8’-0”, and 12’-0” fixture
lengths combine for continuous runs.
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
WIRING*
C=Standard Circuit
B=Battery Pack
D=Dimming
E=Emergency
Y=Daylight
T=Nightlight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0”, and 12’-0” centers. Refer to spec
sheets for various ceiling interface details and
rigid pendant mounting details.
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
48”
96”
-Rigid Pendant
12”, 15”, 18”, 21”, 24” or 27”
(additional pendant lengths available, consult factory)
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
End Caps: Standard end caps are precision diecast aluminum, mechanically attached without
exposed fasteners.
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
OPTIONS
Slide-N-Lock™ (pg. 20-21)
DL1=95% Downlight
DL5=75%
DL2=90% Downlight
DL6=70%
DL3=85% Downlight
DL7=65%
DL4=80% Downlight
DL8=60%
Downlight
Downlight
Downlight
Downlight
Lamp Isolator Kits* (pg. 20-21)
DL/UDU=2 lamps up 1 lamp down
DL/DUD=2 lamps down 1 lamp up
DL/UXU=2 lamps up
DL/DXD=2 lamps down
DL/XDX=1 lamp down
DL/XUX=1 lamp up
Dimensions do not include
end plates or caps
DS=Day-Sense Integral Daylight Sensor
2S=2Sense Integral Daylight/Occupancy Sensor
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
12
Traverse
SUSPENDED | DIRECT-INDIRECT / SEMI-INDIRECT | T5 / T5HO / T8
No matter the design goal, the
Traverse is equipped with the
media and controls to achieve it.
TB-WB with standard die-cast end caps
Micro Prismatic
Lens (TB-WM)
Cross Blade Parabolic
Louver (TB-WB)
RPerformance™
Louver (TB-WH)
Concave Metallic
Perf (TB-WC)
Slide-N-Lock™
(pages 19-20)
Lamp Isolators
(pages 19-20)
Day-Sense
2Sense
Ř)LYHGRZQOLJKWPHGLDRSWLRQV
Ř53HUIRUPDQFHŠ/RXYHUPHHWV53UHTXLUHPHQWV
Ř6OLGH1/RFNŠRSWLFVZLWKILHOGDGMXVWDEOHVHWWLQJV
Ř/DPS,VRODWRUNLWV
Ř'D\6HQVHLQWHJUDOGD\OLJKWVHQVRUDQG6HQVH
integral daylight/occupancy sensor
Traverse Wall
13
High Efficiency
Louver (TB-WW)
SUSPE NDE D TR AV E R SE
ORDERING INFORMATION:
SAMPLE NUMBER:TB-WB-3T8-1C-UNV-AC48-T1-32
SERIES
TB=Traverse Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
B=Cross Blade Parabolic Louver
C=Concave Metallic Perf
H=RPerformance™ Louver
M=Micro Prismatic Lens
W=High Efficiency Louver
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
NUMBER OF LAMPS
1=1 Lamp
2=2 Lamps
3=3 Lamps
9" [229MM]
Louvers: Cross Blade and RPerformance™ are
continuous semi-specular aluminum. Perf is
semi-specular material, perforated section is
15% open with 0.062” diameter holes and opal
diffuser. High Efficiency is continuous highly
reflective painted white aluminum.
OPTICS UP
S=Specular
W=White
SUSPENDED
2-7/8" [73MM]
Construction: Housing is 6063 T5 aluminum
extrusion forming a 9”x2-7/8” rectangular
profile. Standard 4’-0”, 8’-0”, and 12’-0” fixture
lengths combine for continuous runs.
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
WIRING*
C=Standard Circuit
B=Battery Pack
D=Dimming
E=Emergency
Y=Daylight
T=Nightlight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
Mounting: Aircraft cable mounts on 4’-0”, 8’-0”,
and 12’-0” centers. Refer to spec sheets for
various ceiling interface details and rigid
pendant mounting details.
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
48”
96”
144”
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
-Rigid Pendant
12”, 15”, 18”, 21”, 24” or 27”
(additional pendant lengths available, consult factory)
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
OPTIONS
Slide-N-Lock™ (page 20-21)
DL1=95% Downlight
DL5=75% Downlight
DL2=90% Downlight
DL6=70% Downlight
DL3=85% Downlight
DL7=65% Downlight
DL4=80% Downlight
DL8=60% Downlight
Lamp Isolator Kits* (page 20-21)
DL/UDU=2 lamps up 1 lamp down
DL/DUD=2 lamps down 1 lamp up
DL/UXU=2 lamps up
DL/DXD=2 lamps down
DL/XDX=1 lamp down
DL/XUX=1 lamp up
Dimensions do not include
end plates or caps
DS=Day-Sense Integral Daylight Sensor
2S=2Sense Integral Daylight/Occupancy Sensor
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
14
Navigator II
SUSPENDED | DIRECT-INDIRECT / SEMI-INDIRECT | T5 / T5HO / T8
The classic Navigator II, now updated
and tailored to the requirements of
contemporary design.
NB-WB with standard die-cast end caps
Micro Prismatic
Lens (NB-WM)
Cross Blade Parabolic
Louver (NB-WB)
RPerformance™
Louver (NB-WH)
Concave Metallic
Perf (NB-WC)
Slide-N-Lock™
(pages 19-20)
Lamp Isolators
(pages 19-20)
Day-Sense
2Sense
Ř)LYHGRZQOLJKWPHGLDRSWLRQV
Ř53HUIRUPDQFHŠ/RXYHUPHHWV53UHTXLUHPHQWV
Ř6OLGH1/RFNŠRSWLFVZLWKILHOGDGMXVWDEOHVHWWLQJV
Ř/DPS,VRODWRUNLWV
Ř'D\6HQVHLQWHJUDOGD\OLJKWVHQVRUDQG6HQVH
integral daylight/occupancy sensor
Gator Wall
15
High Efficiency
Louver (NB-WW)
SUSPE NDE D NAV I G ATO R I I
ORDERING INFORMATION:
SAMPLE NUMBER:NB-WB-2N5-1C-UNV-AC48-T1-32-DL1
Construction: Housing is 6063 T5 aluminum
extrusion forming a 9”x2-7/8” rounded profile.
Standard 4’-0”, 8’-0”, and 12’-0” fixture lengths
combine for continuous runs.
SERIES
NB=Navigator II Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
B=Cross Blade Parabolic Louver
C=Concave Metallic Perf
H=RPerformance™ Louver
M=Micro Prismatic Lens
W=High Efficiency Louver
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
NUMBER OF LAMPS
1=1 Lamp
2=2 Lamps
3=3 Lamps
9" [229MM]
Louvers: Cross Blade and RPerformance™ are
continuous semi-specular aluminum. Perf is
semi-specular material, perforated section is
15% open with 0.062” diameter holes and opal
diffuser. High Efficiency is continuous highly
reflective painted white aluminum.
OPTICS UP
S=Specular
W=White
SUSPENDED
2-7/8" [73MM]
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical
components certified to UL and CUL standards.
WIRING*
C=Standard Circuit
B=Battery Pack
D=Dimming
E=Emergency
Y=Daylight
T=Nightlight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0”, and 12’-0” centers. Refer to spec
sheets for various ceiling interface details and
rigid pendant mounting details.
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
48”
96”
-Rigid Pendant
12”, 15”, 18”, 21”, 24” or 27”
(additional pendant lengths available, consult factory)
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
OPTIONS
Slide-N-Lock™ (page 20-21)
DL1=95% Downlight
DL5=75% Downlight
DL2=90% Downlight
DL6=70% Downlight
DL3=85% Downlight
DL7=65% Downlight
DL4=80% Downlight
DL8=60% Downlight
Lamp Isolator Kits* (page 20-21)
DL/UDU=2 lamps up 1 lamp down
DL/DUD=2 lamps down 1 lamp up
DL/UXU=2 lamps up
DL/DXD=2 lamps down
DL/XDX=1 lamp down
DL/XUX=1 lamp up
Dimensions do not include
end plates or caps
DS=Day-Sense Integral Daylight Sensor
2S=2Sense Integral Daylight/Occupancy Sensor
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
16
Minigator
SUSPENDED | DIRECT-INDIRECT / SEMI-INDIRECT | T5 / T5HO / T8
The Minigator offers a minimal profile
with the same immense capabilities
as its larger counterpart.
MB-WB with standard die-cast end caps
Micro Prismatic
Lens (MB-WM)
Cross Blade Parabolic
Louver (MB-WB)
RPerformance™
Louver (MB-WH)
Concave Metallic
Perf (MB-WC)
Slide-N-Lock™
(pages 19-20)
Lamp Isolators
(pages 19-20)
Day-Sense
2Sense
Ř)LYHGRZQOLJKWPHGLDRSWLRQV
Ř53HUIRUPDQFHŠ/RXYHUPHHWV53UHTXLUHPHQWV
Ř6OLGH1/RFNŠRSWLFVZLWKILHOGDGMXVWDEOHVHWWLQJV
Ř/DPS,VRODWRUNLWV
Ř'D\6HQVHLQWHJUDOGD\OLJKWVHQVRUDQG6HQVH
integral daylight/occupancy sensor
Gator Wall
17
High Efficiency
Louver (MB-WW)
SUSPE NDE D MI NI G ATO R
ORDERING INFORMATION:
SAMPLE NUMBER:MB-WB-2T8-1C-UNV-AC48-T1-32’-DL5
Construction: Housing is 6063 T5 aluminum
extrusion forming a 6-3/4”x2-1/2” rounded
profile. Standard 4’-0”, 8’-0”, and 12’-0” fixture
lengths combine for continuous runs.
SERIES
MB=Minigator Suspended
Reflectors: Reflector pan is painted with a high
reflectance white powder coat finish. Optional
die-formed side reflectors are highly specular
anodized aluminum.
OPTICS DOWN
B=Cross Blade Parabolic Louver
C=Concave Metallic Perf
H=RPerformance™ Louver
M=Micro Prismatic Lens
W=High Efficiency Louver
Lens: Lens is .125” thick clear micro-prismatic
acrylic material offering 91% transmission.
NUMBER OF LAMPS
1=1 Lamp (N5, T5)
2=2 Lamps (N5, T5, T8)
3=3 Lamps (N5, T5)
6-3/4" [171MM]
Louvers: Cross Blade and RPerformance™ are
continuous semi-specular aluminum. Perf is
semi-specular material, perforated section is
15% open with 0.062” diameter holes and opal
diffuser. High Efficiency is continuous highly
reflective painted white aluminum.
OPTICS UP
W=White
S=Specular
SUSPENDED
2-1/2" [64MM]
LAMP TYPE
N5=T5 Normal Output
T5=T5 High Output
T8=T8 Normal Output
NUMBER OF CIRCUITS*
1=1 Circuit
2=2 Circuits
Electrical: T5/T5HO fixtures are pre-wired with
quick wire connectors and use UL listed Class P,
T5/T5HO program rapid start universal voltage
electronic ballasts, power factor of 97% with
less than 10% THD. T8 fixtures are pre-wired
with quick wire connectors and use UL listed
Class P, 265ma T8 instant start universal voltage
electronic ballasts, power factor of 95% with
less than 10% THD. Fixtures and electrical components certified to UL and CUL standards.
Mounting: Standard aircraft cable mounts on
4’-0”, 8’-0”, and 12’-0” centers. Refer to spec
sheets for various ceiling interface details and
rigid pendant mounting details.
WIRING*
C=Standard Circuit
D=Dimming
E=Emergency
B=Battery Pack
T=Nightlight
Y=Daylight
VOLTAGE*
120=120V
277=277V
347=347V
UNV=Universal (120V-277V)
SUSPENSION
A=Aircraft Cable
P=Rigid Pendant
POWER FEED*
C=Straight Cord
K=Curly Cord
P=Rigid Pendant
SUSPENSION LENGTH
-Adjustable Cable
48”, 120”, 240”, 300”, 360”
(infinite adjustment along entire length of cable)
Finish: Fixture housings are standard white
using electrostatically applied polyester powder
coat paint.
48”
96”
-Rigid Pendant
12”, 15”, 18”, 21”, 24” or 27”
(additional pendant lengths available, consult factory)
CEILING TYPE*
T1=1” T-Bar
T9=9/16” T-Bar
TS=Slotted T-Bar
ST=Structure
JB=4” Octagonal J-Box
144”
RUN LENGTH
Specify luminaire length in feet.
-Individually Mounted
Luminaires may be 4’,8’, or 12’ in length.
-Continuously Mounted
Standard row configurations over 12’ consist of 8’ and 12’ sections.
End Caps: Standard end caps are precision
die-cast aluminum, mechanically attached
without exposed fasteners.
OPTIONS
Slide-N-Lock™ (page 20-21)
DL1=95% Downlight
DL5=75% Downlight
DL2=90% Downlight
DL6=70% Downlight
DL3=85% Downlight
DL7=65% Downlight
DL4=80% Downlight
DL8=60% Downlight
Lamp Isolator Kits* (page 20-21)
DL/UDU=2 lamps up 1 lamp down
DL/DUD=2 lamps down 1 lamp up
DL/UXU=2 lamps up
DL/DXD=2 lamps down
DL/XDX=1 lamp down
DL/XUX=1 lamp up
Dimensions do not include
end plates or caps
DS=Day-Sense Integral Daylight Sensor
2S=2Sense Integral Daylight/Occupancy Sensor
PROJECT NAME:
CATALOG #:
TYPE:
-
-
-
-
-
*Not all options available. Please consult your Cooper Lighting Representative for availability and
technical information. Specifications and dimensions subject to change without notice.
-
-
-
18
SLIDE-N-LOCK™
The original revolutionary Slide-N-Lock™ optics designed for the Navigator II can
also be specified for all D/I Extruded families. Rather than one optic per configuration,
the Slide-N-Lock™ is a one-size-fits-all optic with 8 settings that are factory preset at the specified level and, if necessary, can later be easily adjusted in the field.
To adjust, simply depress the control notch, then “Slide-N-Lock” the optic into the
new desired setting.
GXk\ ek\ [
Ř 83/,*+7$1'
DOWNLIGHT SETTINGS
Ř )8//<),(/'$'-867$%/(
uplight
5%
95%
downlight
10%
90%
15%
85%
DL2
DL1
20%
80%
DL3
25%
75%
DL4
30%
70%
DL5
35%
75%
DL6
40%
60%
DL7
DL8
*All distributions based on a 2T8 lamping
LAMP ISOLATORS
The ability to isolate uplight and downlight when combined with dual circuit
wiring is an added feature of several Corelite fixtures. This feature is ideal
for training rooms, classrooms and lecture halls where three light levels may
be required to accommodate a variety of room tasks.
Ř $''(')/(;,%,/,7<:,7+
DUAL CIRCUIT WIRING
Ř ,'($/)250(',$
PRESENTATIONS
;$L$;
L4@jfcXkfiLg
;4@jfcXkfi;fne
O4Ef@jfcXkfi
19
;$O$;
O$L$O
L$;$L
L$O$L
O$;$O
A pp l icat io n Ex am p le > Su p erm ark e t – Low-Ene rgy Sta c k s
* K / KiX [ ` k ` f e X c
Scenario 1
Ř
Ř
Ř
Ř
ő&HLOLQJ
ő0RXQWLQJKHLJKW
7œ2SHQŔFRQƂJXUDWLRQ
$YHUDJH+RUL]RQWDO,OOXPLQDQFHOOI
Vertical Shelf Surface: 25.9 fc
Floor: 39.5 fc
Ceiling: 114.0 fc
Ř :DWWVSHUVTIW
SUMMARY
Scenario 1 illustrates a typical direct-indirect
supermarket application wherein luminaires
are suspended high above the floors and
aligned with the aisles. Although the bright
FHLOLQJ VXUIDFHV FUHDWH DQ RSHQ IHHO
wasted light in the ceiling truss represents
wasted energy.
* Lamp: Standard T8, 3000 initial lumens
Ballast: .88 Ballast factor, 85 input watts
) K / LckiX<e\i^p<]]`Z`\ek
Scenario 2
Ř
Ř
Ř
Ř
ő&HLOLQJ
ő0RXQWLQJKHLJKW
7'/VXSHU7FRQƂJXUDWLRQ
$YHUDJH+RUL]RQWDO,OOXPLQDQFH
Vertical Shelf Surface: 28.8 fc
Floor: 41.5 fc
Ceiling: 19.8 fc
Ř :DWWVSHUVTIW
** Lamp: “Super T8”, 3100 Initial Lumens
Ballast: .88 Ballast Factor, 55 input watts
SUMMARY
By lowering the luminaire's mounting
height, eliminating a lamp, utilizing an ultra
energy efficient lamp/ballast combination
and adding Slide-N-Lock™ Optics in the
DL5 configuration, light levels improve
and energy consumption is substantially
reduced. Although the uplight is lowered
dramatically, 25% of the total output still
gently illuminates the ceiling for subtle
luminous effects.
IMPROVED VERTICAL A N D
H O R I Z O N T A L I L LUMINANCE
USING 4 0 % LESS
ENERGY!
A pp l icat io n Ex am p le > Clas s ro om/Tra ining Room
Scenario 1
Scenario 2
Scenario 3
Ř '8'/DPS,VRODWRUFRQILJXUDWLRQ
Ř '8'/DPS,VRODWRUFRQILJXUDWLRQ
Ř '8'/DPS,VRODWRUFRQILJXUDWLRQ
Ř 2XWERDUGODPSVDW100%
inboard lamp at 100%
Ř 2XWERDUGODPSVRII
inboard lamp at 5%
Ř 2XWERDUGODPSVDW
inboard lamp off
Maximum system brightness for
clean-up and non-media presentations, notice the screen is washed out.
This setting creates enough ambient
illumination for wayfinding and note
taking while creating ideal projection
screen contrast.
This condition creates recommended
light levels for reading and writing
while also creating great projection
screen contrast by eliminating the
uplight component.
20
21
22
23
24
Corelite
4675 Holly Street
Denver, CO 80216
P: 303-393-1522
F: 303-393-1477
International Sales, USA
Cooper Lighting
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
F: 770-486-4801
Cooper Lighting
Customer First Center
1121 Highway 74 South
Peachtree City, GA 30269
Canada
Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 770-486-4800
F: 770-486-4801
P: 905-507-4000
F: 905-568-7049
www.cooperlighting.com
Domestic Facilities
Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia
The Cooper Lighting Family
Halo
Metalux
Lumark
Sure-Lites
Neo-Ray
Corelite
Portfolio
Iris
Shaper
io
Lumière
Invue
McGraw-Edison
Streetworks
Fail-Safe
PDS
MWS
RSA
Ametrix
Canadian Facilities
Calgary, Alberta T2E 7V9
Mississauga, Ontario L5R 1B8
Cooper Lighting and Corelite logos are valuable trademarks of Cooper Industries in the United States and other countries.
You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.
Cooper Industries, Ltd.
600 Travis, Ste. 5800
Houston, TX 77002-1001
3
www.cooperindustries.com
3ULQWHGLQ86$