Safety Grating
GSMSG-13R
Safety gratings
product line overview
Product Applications
• Quality Safety Gratings With The Widest Assortment •
Ladder Rungs - Stair Treads - Walkways - Mezzanine Flooring - Rooftop Walkways
GRIP STRUT™ Walkways
GRATE-LOCK™ Rooftop Walkways
Mezzanine Grating
Mezzanine Flooring
Stair Treads
Ladder Rungs
2
Safety Gratings
Product
GRIP STRUT ™
Safety Grating
Eaton’s B-Line Business is the manufacturer of the
original GRIP STRUT Safety Grating.
• High strength lightweight metal grating designed for
safety underfoot
• Unique one-piece diamond-shaped construction
provides slip resistance in all directions
• Suited for all walking/working surfaces where mud,
ice, snow, grease, oil and detergents create slippery
or hazardous conditions
• Commonly used for work platforms, industrial
flooring, catwalks, balconies, storage areas,
walkways, and stair treads
• Standard Lengths - 10’ & 12’
• Type 316 Stainless Steel available upon special quote
* Stainless only available in plank form and up to
113/4” wide
• Relief hole available upon request on 3, 4, &
5-diamond planks
• Special fabrication, cutting or specialty
configurations available upon request
Plank
Walkway
Available Configurations
Side Channel Available
Gauge & Type Available
Product Widths Available
11/2”, 2”, 21/2”, 3” (Planks)
12 ga. or 14 Ga. Galvanized or HRP&O Steel
0.080 or 0.100 Aluminum 5052-H32
*16 Ga. Type 304 Stainless Steel
43/4”, 7”, 91/2”, 113/4”,
183/4”, 24” (Planks)
41/2” (Walkway)
12 ga. or 14 Ga. Galvanized or HRP&O Steel
24” (Walkway)
Application Photos
Safety Gratings
3
Product
Heavy Duty GRIP STRUT ™
Safety Grating
Plank
Eaton’s B-Line Business is also the manufacturer of the
Heavy Duty GRIP STRUT Safety Grating.
• One-of-a-kind plank grating sporting a hefty 24 foot
clear span capability
• Offers the advantages of regular GRIP STRUT plus
the capabilities for greater loads and/or longer spans
• Ideal for process plants, refineries, grain elevators,
conveyor walkways, under-bridge inspection
walkways, papermills, etc.
• Competitive against Bar Grating
• Standard Lengths - 10’ & 12’
• Available in 24-foot spans
• Less support structure means labor savings
• Walkways also available in 20’ & 24’
• 9 Ga. & 11 Ga. available upon request
• Hot Dip Galvanized after fabrication is available
upon request
• Special fabrication, cutting or specialty
configurations available upon request
Walkway
Available Configurations
Side Channel Available
Gauge & Type Available
Product Widths Available
2”, 21/2”, 3”, 4” Planks
10 Ga.
Galvanized Steel &
HRP&O Steel
91/4”, 133/4”, 231/4”,
273/4”, 36” (Planks)
5” (Walkway)
24”, 30” & 36” (Walkway)
Application Photos
4
Safety Gratings
Product
TRACTION TREAD ™ Flooring – Plank, Sheet, & Ladder Rungs
TRACTION TREAD panels have a surface of perforated raised buttons. The perforations
allow spillage to drain and break oil film, detergent, and other slippery agents away from
the walking surface.
• Ideal for pedestrian traffic
• Button design allows all to walk comfortably and safely over the surfaces
• Offered in planks and 36” x 120” sheets
• Ideal for pedestrian walkways, scaffold planking, mezzanines, stair treads,
and resurfacing of worn materials
Plank
• Useful anywhere a light slip-resistance flooring is required
• Sheet Length - 10’ (120”) - also available in HRP&O steel
Other
• Plank Lengths - 10’ & 12’
Available
• Ladder Rung Length - 483/4” & 60”
Button
• Stainless available upon request
Patterns
• Special fabrication cutting or specialty configurations available upon request
Available Configurations
Product
Channel Heights
Gauge & Material
Widths
Sheet
N/A
11 Ga., 12 Ga., 13 Ga., 14 Ga. & 16 Ga.
HRP&O Steel
0.125 Aluminum 5052-H32
36”
Planks
2”,
1 /2” (Minimum)
11 Ga., or 13 Ga.
Pre-Galvanized Steel
0.125 Aluminum 5052-H32
11/2” (2 row)
11/4” (2 row)
11/8” (3 row)
11 Ga. or 13 Ga. Galvanized or
HRP&O Steel
11/2” (4 row)
0.125 Aluminum 5052-H32
21/4” (4 row)
Ladder
Rungs
1
Ladder Rungs
7”, 10”, 12”
15/8” (3 row)
PERF-O GRIP ™
PERF-O-GRIP is a plank metal grating offers a slightly less aggressive surface than
GRIP STRUT .
• Made with a round hole pattern
• Light weight and resilient design makes the product easy to handle and
install producing a very economical installed cost
• Standard Lengths - 10’ & 12’
• Stainless Steel and Hot Dip Galvanized After Fabrication are available upon
request and special quotation
• Special fabrication, cutting or specialty configurations available upon request
Available Configurations
Channel Heights Available
Gauge & Type Available
Product Widths Available
11/2”, 2” (Plank)
11 Ga. or 13 Ga. Galvanized Steel
or HRP&O Steel
.125 Aluminum 5052-H32
5”, 7”, 10”, 12”, 18”, 24”
(Plank)
5” (Walkway)
11 Ga. or 13 Ga. Galvanized Steel
or HRP&O Steel
24”, 30” & 36” (Walkway)
Safety Gratings
5
Plank
Grating
Product
Stair Treads, Reconditioning Material, Ladder Rungs
Stair Treads
We offer a full range of stair tread products.
• GRIP STRUT™ with abrasive nosing
• GRIP STRUT™ without nosing
GRIP STRUT
Stair Tread
without nosing
• Heavy Duty GRIP STRUT™
• PERF-O GRIP™
• TRACTION TREAD™
• GRATE-LOCK™
GRIP STRUT
Stair Tread with
abrasive nosing
Reconditioning Material
• Economical method of resurfacing worn and
unsafe floors
• Down-turned edges allow the grating to lie flat
and secure over existing flooring
• Available in GRIP STRUT
GRIP STRUT Reconditioning Material
Ladder Rung
We offer a large variety of ladder rungs for use in different
environments and industries
• GRIP STRUT one-diamond ladder rungs are ideal in
environments where safe footing is hard to come by.
Diamonds can also run perpendicular to the length
GRIP STRUT
Ladder Rung
• TRACTION TREAD ladder rungs are ideal for use in
hand-over-hand ladder applications where safe
footing is also required
TRACTION TREAD
Ladder Rung
6
Safety Gratings
Product
GRATE-LOCK ™
Interlocking Type Mezzanine Grating
GRATE-LOCK safety grating is a easy-to-install system of
interlocking planks, treads and accessories, providing
safe, sturdy footing for mezzanine floors, platforms,
walkways and other applications.
• Increased load performance has been achieved
through interlocking planks and a “ventilated” rung
design
• Hundreds of sole-gripping dimples help ensure a safe
surface in all kinds of environments
Smooth (MS) shown
• Lighter gauge steel for substantial material savings.
• Standard Lengths - 12’, 20’ & 24’
• Side Channels in Female/Male (FM), Female/Female (FF),
or Male/Male (MM) configurations
• Surface in smooth (MS) or gripping (MG) configuration
• Special fabrication cutting or specialty configurations
available upon request an special quotation
• Other heights and steel gauges available
Gripping (MG) configuration
Available Configurations
Channel Heights
Available
Gauge & Type
Available
Product Widths
Available
11/2”, 21/2”, 3”, 4”
18 Ga. or 14 Ga.
Galvanized Steel
3” (Solid Filler)
6”, 9”, 12”
Specialty Products & Fabrications
We are dedicated to serving your needs. Specialty fabrication services (cut to length, banding, welding, and general
fabrication) is available at your request. If you have an idea in mind, let us know and we will make every effort to fill
your needs and solve your specific problems.
Safety Gratings
7
U.S. Customer Service Center is staffed Monday through Friday
from 7 a.m. to 5:00 p.m. Central Standard Time.
For more information visit, www.cooperbline.com/grating.
Eaton’s B-Line Business
United States
509 West Monroe Street
Highland, IL 62249
United States
Phone: (800) 582-3643
www.cooperbline.com/contactus
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton’s B-Line Business
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917
www.cooperbline.com
© 2013 Eaton
All Rights Reserved
Printed in USA
Publication No. GSMSG-13R
October 2014
Eaton is a registered trademark
All other trademarks are property
of their respective owners.