Perforated & Solid Cable Tray - Straight Section Covers
Straight Section Covers
Solid Flanged
Cover
Tray Width + 4mm
Thickness
15
A full range of covers is available for straight sections.
Solid flanged covers should be used when maximum enclosure of the cable is desired and no accumulation of
heat is expected.
Flanged covers have a 15mm flange.
Cover clamps are not included with the cover and must be ordered separately.
Straight Section Cover Part Numbering
Example: PC F S P 15 SS - 300 - 3000 - SA
Cover
Type
Cover
Style
Top
Style
PC =
F=
Formed
S=
Solid
(Perforated
& Solid
Tray Cover)
(Southern Asia)
Material
Thickness
Type
Width
Length **
P = Pre-Galv
G = HDGAF
SS6 = Stainless
Type 316
10 * = 1.0mm
15 = 1.5mm
SS =
Straight
Section
050 = 50mm
100 = 100mm
150 = 150mm
200 = 200mm
300 = 300mm
400 = 400mm
500 = 500mm
600 = 600mm
900 = 900mm
1500 = 1.5m
3000 = 3.0m
* 1.0mm thickness is only available in widths up to and including 300 (300mm).
** All G (galvanized steel) covers only available in 1500 (1.5m) lengths. 900 (900mm) widths only available in 1500 (1.5m) lengths.
All dimensions are in millimeters unless otherwise specified.
22
Perforated & Solid Cable Tray - Fitting Covers
Fitting Covers
HT
Horizontal Tee
HT
Horizontal Bend
Mitered Shown
Mitered Shown
HX
Horizontal Cross
Formed Shown
VO
Vertical Outside Bend
VI
Vertical Inside Bend
Formed Only
Formed Only
LR
Right Reducer
SR
Straight Reducer
RR
Left Reducer
Mitered Only
Mitered Only
Mitered Only
A full range of covers are available for fittings.
Solid flanged covers should be used when maximum enclosure of the cable is desired and no accumulation of
heat is expected.
Flanged covers have a 15mm flange. Cover clamps are not included with the cover and must be ordered separately.
Fitting Cover Part Numbering
Example: PC F S P 15 HB - 500 - 60 R600 - 050 - SA
Cover
Type
Cover
Style
Top
Style
PC =
F=
Formed
M=
Mitered
S=
Solid
(Perforated
& Solid
Tray
Fitting
Cover)
(Southern Asia)
Angle †
Material
Thickness
P = Pre-Galv
G = HDGAF
SS6 = Stainless
Type 316
10 * = 1.0mm
15 = 1.5mm
Type
HB
HT †
HX †
VO ***
VI ***
RR †
LR †
SR †
Width
(°)
Radius
050 = 50mm
100 = 100mm
150 = 150mm
200 = 200mm
300 = 300mm
400 = 400mm
500 = 500mm
600 = 600mm
900 = 900mm
30
45
60
90
R300 =
300mm
R600 =
600mm
R900 =
900mm
* 1.0mm thickness is only available in widths up to and including 300 (300mm).
angle designation required on these fitting covers.
*** Not available as a mitered cover
††† Required on VO part numbers only.
† No
All dimensions are in millimeters unless otherwise specified.
23
Tray
Height †††
025 =
25mm
050 =
50mm
075 =
75mm
100 =
100mm