Pipe Clamps B3141 - A.W.W.A. Pipe Clamp (TOLCO Fig. 4CI) Size Range: 4" (100mm) thru 24" (600mm) pipe A Material: Steel Function: Recommended for the suspension of flanged or bell and spigot A.W.W.A. cast iron or ductile iron pipe. The O.D. of the A.W.W.A. iron pipe is shown in the data table. Used with B3200 weldless eye nut, B3210 eye rod or B3211 welded eye rod. Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 4, and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 4. B Maximum Temperature: 650°F (343°C) Finish: Plain Note: Available in Electro-Galvanized and HDG finish or Stainless Steel materials. B Order By: Part number, pipe size and finish Pipe Clamps Part No. Pipe O.D. in. A (mm) in. B (mm) in. 11/8" (28.6) 41/16" (28.6) (mm) Bolt Size Max. Recommended Design Load lbs. (kN) (103.2) 5/8"-11 1400 51/16" (128.6) 5/8"-11 1400 (157.2) 5/8"-11 (184.1) 5/8"-11 Approx. Wt./100 lbs. (kg) (6.23) 860 (390.1) (6.23) 1060 (480.8) 1400 (6.23) 1230 (557.9) 1400 (6.23) 1430 (648.6) B3141-4 4.80" (121.9) B3141-6 6.90" (175.2) 11/8" B3141-8 9.05" 11/8" (28.6) 63/16" B3141-10 11.10" (281.9) 11/8" (28.6) 71/4" B3141-12 13.20” (335.3) 11/8" (28.6) 85/16" (211.1) 5/8"-11 1400 (6.23) 1630 (739.3) B3141-14 15.30" (388.6) 13/4" (44.4) 97/8" (250.7) 3/4"-10 2000 (8.89) 2300 (1043.3) B3141-16 17.40" (441.9) 13/4" (44.4) 115/16" (287.3) 7/8"-9 2500 (11.12) 3725 (1689.6) B3141-18 19.50" (495.3) 17/8" (47.6) 129/16" (319.1) 1"-8 3000 (13.34) 4200 (1905.1) B3141-20 21.60" (548.6) 2" (50.8) 135/8" (346.1) 1"-8 3100 (13.79) 4575 (2075.2) (50.8) 165/16" (414.3) 1/4"-7 4500 (20.01) 6400 (2903.0) B3141-24 (229.9) 25.80" (655.3) 2" All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified. 81 Pipe Hangers & Supports