VICTOR VALLEY COLLEGE SYLLABUS
SPRING 2016
COURSE NO.:
AUTO 80
SECTION NO.:
55479 CLASS HOURS:
INSTRUCTOR NAME: JOHN SWEET
E-MAIL ADDRESS:
COURSE TITLE: AUTOMOTIVE COMPUTERS & ELECTRONICS UNITS: 12.0
8:00AM TO 12:00 PM
OFFICE NO: VE-3
DAYS: M, T, W, TH, F ROOM NO.:AU8-A
TEL. EXT.:
2426
john.sweet@vvc.edu
SPRING CALENDAR
Spring Term Begins
Spring Break Holiday (college closed)
College Closed (no classes)
Spring Break (no classes-offices open)
College Closed (no classes)
Memorial Day Holiday (college closed)
Commencement
Spring Semester Ends
Sixteen (16) week term
Off-Campus Twelve (12) week term
First Twelve (12) week term
Second Twelve (12) week term
First Eight (8) week term
Second Eight (8) week term
February 16
March 25
March 26
April 11 – 15
April 16
May 30
June 10
June 11
February 16 – June 11
February 16 – May 14 (Does not follow VVC calendar, see that site’s calendar)
February 16 – May 14
March 14 – June 11
February 16 – April 9
April 18 – June 11
WITHDRAWAL POLICY
NOTE – CAMPUS IS CLOSED and CLASSES WILL NOT BE HELD ON CAMPUS THE FOLLOWING DATES:
March 25th, 26th, April 11th, 12th, 13th, 14th, 15th, 16th, and May 30th
STATEMENT OF ACCESS: Students with special needs are encouraged to meet with instructors to discuss the opportunity
for academic accommodation and referral to Disabled Students Programs and Services (DSPS) and services per
Administrative Procedure (AP 3440)
Visit Victor Valley College online at www.vvc.edu
Prerequisite:
None, but Auto 50, 50.5, and/or Auto 79 very helpful
Page 1 of 24
01/08/15
Textbook:
1. MAST (Modern Automotive Service Technician)
(Purchase your individual packet with your Access Code from the Ram’s Bookstore)
2. Auto 80 Lab Packet including NATEF A-6 Tasks (purchased from Rams bookstore)
3. Auto 80 Lab Book (sign off) supplied by the Instructor
Course Description:
This course covers the techniques used by the automotive industry to diagnose and repair computer, fuel injection, and
electronic ignition systems. Goal of course is to take ASE A-6 test and become employed in the automotive repair field.
Course Objectives:
1. Recognize and identify shop safety, environmental hazards and sustainable environmental
practices in an automotive repair facility.
2. Recognize and evaluate the condition of an automotive electrical system
3. Recognize and evaluate automotive battery malfunctions
4. Recognize and evaluate starting systems
5. Recognize and evaluate automotive charging systems
6. Recognize and evaluate automotive lighting systems
7. Recognize and evaluate condition of gauges, warning devices, and driver information
systems
8. Recognize and evaluate automotive horn, wiper, and washer systems
Student Learning Outcomes:
1. Safely and responsibly perform automotive repairs while minimizing negative impact on the
environment.
2. Determine and perform the necessary repairs to bring a vehicles electrical system into
industry compliance for driveability and Emissions
Page 2 of 24
01/08/15
Attendance Policy: (Class attendance is not a measure of performance or proficiency. Whether a student is just physically
present in the class is not a valid basis for grading. Reference Title 5 Section 55002 of the California Code of Regulations: (A)
Grading Policy. The course provides for measurement of student performance in terms of stated course objectives and
culminates in a formal, permanently recorded grade based upon uniform standards in accordance with section 55758 of this
Division. The grade is based on demonstrated proficiency in the subject matter and the ability to demonstrate that
proficiency, at least in part, by means of written expression that may include essays, or, in courses where the curriculum
committee deems them to be appropriate, by problem solving exercises or skills demonstrations by students.)
Grading Policy:
Automotive Knowledge Tests
20%
90 to 100%
=
A
Written Examinations
20%
80 to 89%
=
B
Quizzes
15%
70 to 79%
=
C
Homework
15%
60 to 69%
=
D
Under 60%
=
F
Laboratory (Inst 10%--NATEF 20%) 30%
Automotive Computers, Electronic, & Electrical Systems
AUTO 80
LAB WORK:
Lab work gives the students the skills needed to become employed in the automotive trade and
it will count for 30% (10% for Instructors book and 20% for the NATEF book) of your final grade. A student should
treat their lab time as they were working in an auto repair shop, keeping in mind customer satisfaction. All
repairs must be completed in a timely and thorough manner. Students will work in assigned teams and are
expected to cooperate with team members and work together in a safe manner. There are up to 146 (if the ASE
A-6 NATEF Standards Job Sheets are all done, this number includes the Instructors lab projects (Auto 80 Lab
Book), each have a value of from 0 to 200 points, and the total maximum possible points are 735 for Instructors
and 250 for NATEF, 662 (Instructors) & 225 (NATEF) points are the minimum required for an “A” in lab. The lab
grade will depend upon the lab points accumulated and signed off by the instructor or assistant. You must
perform lab work to succeed in Auto 80. Each lab assignment is at least a part of an ASE Task; before a lab
project will be signed off you must explain the result or lesson learned to the instructor or assistant. During lab
sessions a student must dress appropriately (no shorts, sandals or baggy clothes). Students must wear ANSI
impact rated safety glasses as well as nitrile rubber gloves when exposed to hazards during all lab sessions.
Assignments are either in the NATEF Standards Job Sheets or Instructors Lab Book. All sheets must be filled out
and documented properly. Auto 80 is not designed for the lab book to be completed 100%, but at least (95% of P1, 80% of p-2, and 50% of P-3 Tasks must be completed) there are enough projects to receive an A for lab. Be
sure to check all NATEF Job Sheet or Instructors Lab Sheets early in the semester to become familiar with all the
tasks. This way as repair orders are assigned, you can document your lab work. When your team is assigned a
Student Tech Sheet (repair order) look in this book and the index for all of the NATEF Job Sheets that apply to
that job. Fill out each NATEF Job Sheet or Instructors Lab Sheet completely and tear them out of the book, the
day when they are turned into the Service Consultant is the only time they will be signed off and awarded the
earned points. The following chart outlines lab points and there relationship to the lab grade.
Page 3 of 24
01/08/15
Instructors
LAB GRADE
662
To
735
Points
A
589
To
661
Points
B
516
To
588
Points
C
514
To
515
Points
D
514
Points
F
Below
NATEF
LAB GRADE
225
To
250
Points
A
175
To
224
Points
B
150
To
174
Points
C
125
To
149
Points
D
125
Points
F
Below
Page 4 of 24
01/08/15
Special note: Log on to Blackboard, then to your class (Auto 80) and
you will see links that will help you through all phases of the class
(located on the left side under How to videos and E-Lectures)
Tech Sheet (Repair Order) Grading Rubric
These are examples of proper service order documentation and the corresponding
subjective grade.
Example of repair order request: Owner reports engine runs roughly inspect and
advise.
1.
Engine missing.
2.
Engine has ignition misfire.
3.
Engine has ignition misfire from #1 cylinder.
4.
Scanned vehicles computer system and found that the #1 cylinder has an ignition misfire from the #1
cylinder. Hooked vehicle to oscilloscope of found high firing line on #1 cylinder.
5.
Scanned vehicles computer system and found one code present, PO301 indicating misfire on the #1
cylinder. Hooked vehicle to oscilloscope and found high firing line on #1 cylinder indicating open in the
ignition wire to the #1 cylinder. Inspected spark plugs and found the #1 spark plug was also fuel and
carbon fowled and showed excessive wear. Recommend replacing ignition wires and spark plugs. After
this condition is corrected further diagnosis will need to occur to determine if any further condition exists.
Page 5 of 24
01/08/15
Example of proper tech sheet documentation after the cooling system was opened –
Use this as a guide for any other repair procedures on the vehicle systems
The team filled the cooling system with the proper mix of the recommended coolant and water then made sure all trapped
air was removed. We brought the vehicle to operating temperature and verified the thermostat opened and the cooling fan
operated as designed then pressure tested the cooling system and found no leaks.
SAFETY:
All students will be given thorough safety instructions and a S/P-2 safety test (must
be passed with a grade of 80% or more before lab work is allowed). Log on to the
Internet sp2.org website. Your user name is 78442, your password is fact, and your
pin is your last 6 digits of your student ID number. Read the information presented
for S/P2 Training for Mechanical Repair Safety and S/P2 Training for
Mechanical Repair Pollution Prevention, take the quizzes, take both finals.
Successful completion of these two tests satisfy your safety requirements for one
year in the VVC Automotive Program. All lab rules and safety practices must be
followed. Failure to follow these rules is cause to be dropped from class. NOTE:
All students are required to have and bring eye protection (no sun glasses) (eye
protection will NOT be loaned from the tool crib) to all lab sessions. A student must
put on their eye protection as they walk from the classroom into shop. For every task
in Engine Performance the following safety requirement must be strictly enforced:
Comply with personal and environmental safety practices associated with clothing;
eye protection; hand tools; power equipment; proper ventilation; and the handling,
storage, and disposal of chemicals/materials in accordance with local, state, and
federal safety and environmental regulations.
Page 6 of 24
01/08/15
HOMEWORK:
Homework will be assigned most Monday’s and will be due on Wednesday
of the following week. Homework consists of reading the assigned Module Lessons in the
MAST textbook as well as answering the Instructor supplied
questions (it must be legible as another student will correct the paper). Late
homework will not be accepted, but you will receive one late coupon for one
late homework assignment. Homework will count for 15% of your final grade.
See the course syllabus and class schedule for the homework assignments.
Late Homework Coupon
Name ____________ Date ___/___/___ Chapter ________
Auto 80 -- Spring 2016
Staple this Coupon to your Late Homework Assignment
Page 7 of 24
01/08/15
ATTENDANCE:
Attendance is very important; if you are not in class you can’t hear the lecture,
see the video, or perform lab work. A student can be dropped for missing four classes without
personal or telephone contact with the instructor (see student handbook). Leaving class early
without instructor’s permission is considered an absence. The instructor uses the time just
after roll call to review course material, perform lab demonstrations, and administer the
automotive knowledge test. Missing this time will affect your grade and you will get less out of
the class. You should treat your Auto 80 Class as if you are employed in an auto shop, no
employer will put up with an employee coming in late or having too many absences. Roll (signin sheet) will be taken at 8:00 AM sharp each morning, if you are not in your seat you are not
counted, roll will also be taken at the end of class occasionally. Note: If you disrupt the class by
talking at inappropriate times you will be asked to leave the class, see the VVC Student
Handbook.
TESTS,
There will be a test after each chapter or section, (large sections may be
AUTOMOTIVE
broken down), an automotive knowledge test at the beginning of each class session,
KNOWLEDGE
and quizzes can be given at any time. If you miss a test it is your
QUESTION,
responsibility to make it up within two weeks, or you will receive half credit.
&
and automotive knowledge tests cannot be made up. The tests will usually be
QUIZZES
administered on the Wednesday or Thursday of the week following the assigned
material. Again quizzes can be given at any time. You will find Chapter Quizzes in MAST, you
may take these as many times as you want and you will receive credit for the highest score in
each area There will be a final test given the last week of the semester.
Quizzes =15%, Tests = 20%, Automotive Knowledge Questions = 20%
of the final grade.
AUTOMOTIVE
KNOWLEDGE
QUESTION:
There will be an automotive knowledge question given just after roll call each class
session. This test will emphasize automotive technology, industry practices,
safety, ASE tests material, automotive laws, and work ethics. Missing this
lecture/demonstration, and test will affect your Auto 80 grade. You will also lose
valuable knowledge that could affect the quality of your automotive career.
As noted above, the automotive knowledge question will count for 20% of your final
grade.
Page 8 of 24
01/08/15
All students are required to have a three ring notebook with dividers and two packages of scantrons form number 882-ES
(scantrons will not be returned)(this package is purchased from the Victor Valley College Rams Book Store along with
your MAST eTextbook login and your Auto 80 Lab Packet).
Common Sense Rules for Automotive Technicians
1. Try not to borrow any tool more than once.
2. Don't start screwing an important bolt or plug into its hole and walk away thinking you'll remember to tighten
it later.
3. Don't leave any vehicle with a dry crankcase or bad brakes without disabling the vehicle so it can't be started
and driven.
4. When parking a customer's vehicle outside, don't leave the windows down, even if the weather is clear.
5. When doing an oil change along with another service operation, always complete one operation before
beginning the other.
6. Being a really good mechanic doesn't give you a license to be a jerk - not ever.
7. Don't plunder in the console or glove box of a customer's car just to see what they have in there.
8. Don't take any of their ashtray coins or their chewing gum.
9. Don't change their radio station. Turn the radio off if you don't like what's playing.
10. When replacing something like a water pump, glue the gasket to the pump instead of the mating surface - it
makes things easier for the next tech.
11. Always respect the next tech and work to make things easier for him (or her). The next tech might be you.
12. Don't dress like a slob. You're a professional.
Page 9 of 24
01/08/15
Automotive Computers, Electronics and
Electrical Systems
AUTO 80
CLASS SCHEDULE
WEEK 1:
Introduction to Auto 80 course, shop safety, diagnostic equipment, introductions,
2/16 - 2/19
SP2 training, receive tool lists (tools are required for Auto 80 see tool list), equipment
hook up, smog inspections, team assignments, and team leader responsibilities, repair
order procedures
LAB WORK: Tour of Auto Shop, (computer lab, tool crib, shop area), equipment
hook up lab sheet, SP2 Tests
HOMEWORK: Buy (login) and preview MAST eTextbook, read course syllabus,
(there will be a quiz on Tuesday) Read in Chapter 3, Basic Hand Tools, Chapter 5, Auto Shop
Safety, Chapter 7 Service Information and Work Orders. Read Instructors Electrical Study Guide.
Answer Instructor supplied homework questions, Electricity # 1 (you might have to refer to
Chapter 17 or 18
QUIZ: Chapter 3, 4, & 7 (online) Listed as Auto 80 Spring 15 Ch XX Quiz in MAST
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
Page 10 of 24
01/08/15
WEEK 2:
2/22 - 2/26
Basic Theories, Automotive Electricity and Electronics
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Chapter17 - Electrical Principals, Chapter 18 Circuit Types and Ohm’s Law,
Chapter 20 Electrical Tools and Test Equipment .
Read Instructor’s Electrical & Electronic Study Guide, Answer Instructor supplied homework
questions. Electricity # 2
QUIZ: Chapters 17, 18, & 20 (online)
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
WEEK 3:
2/29 - 3/4
Automotive Electricity and Electronics -- Application
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Instructors Handouts on Computers, Read Chapter 23 - Computer System
Fundamentals, Chapter 24 – On-Board Diagnostic Scan Tools.
Answer Instructor supplied homework questions.
QUIZ: Chapters 23 & 24 (online)
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
WEEK 4:
3/7 - 3/11
Automotive Computers Systems
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Chapter25 - Computer System Services -- Read instructors handouts for
computer systems theory & OBD II, answer Instructor supplied OBD II homework questions
QUIZ: Chapter 25 (online)
TEST: Electricity
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
Page 11 of 24
01/08/15
WEEK 5:
Automotive Computer Systems/OBD II
3/14 - 3/18
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Chapter34 - Ignition System Technology & Chapter 35 - Ignition
System Diagnosis, Testing and Repair, Answer Instructor supplied homework questions.
QUIZ: Chapter 34 & 35 (online)
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
WEEK 6:
Ignition Systems
3/21 - 3/24
LAB WORK:
N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Instructors handouts for Electrical Circuits, Read Chapter21,
Wiring Diagrams and Wiring Repairs – Chapter 40, Fuel Tanks, Pumps, Lines, and Filters
Chapter 41, Gasoline Injection Fundamentals - Chapter 42, Gasoline Injection Diagnosis and
Repair
QUIZ: Chapter 21, 40, 41, & 42 (online)
TEST: Computers
Register for new ASE Computer Based Testing
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
WEEK 7:
Electrical Circuits – Fuel Injection
3/28 - 4/1
LAB WORK:
N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Chapter 32, Charging System Technology & Chapter 33, Charging
System Diagnosis and Repair, Answer Instructor supplied homework questions.
QUIZ: Chapter 32 & 33 (online)
TEST: Ignition Systems
Page 12 of 24
01/08/15
Register for new ASE Computer Based Testing
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
WEEK 8:
Charging Systems -- Student Learning Outcome Assessment Test
4/4 - 4/8
LAB WORK:
N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Read Chapter 30, Engine Starting Systems & Chapter 31 - Starting System
Diagnosis and Repair, Answer Instructor supplied homework questions.
QUIZ: Chapter 30 & 31 (online)
TEST: Electrical Circuits
Spring Break Holiday Monday, April 11 thru Friday, April16, Have Fun, Drive Carefully
WEEK 9:
Starting Systems
4/18 - 4/22
LAB WORK:
N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Scan the MAST eTextbook for areas of interest
If you are taking an ASE Test use Car and Light Truck Series for ASE test preparation
WEEK 10:
4/25 -4/29
ASE Test Preparation
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets, Car and Light Truck Series for ASE test
preparation
HOMEWORK: Read Chapter 36,- Lights, Instrumentation, Wipers, and Horns
Answer Instructor supplied homework questions
QUIZ: Chapter 36 (online)
Page 13 of 24
01/08/15
WEEK 11:
Lighting Systems
5/2 -5/6
LAB WORK:
N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Scan the MAST eTextbook for areas of interest
TEST: Charging and Starting Systems
WEEK 12:
Advanced Diagnostic Strategies
5/9 - 5/13
LAB WORK:
N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Chapter 51, Emission Control System Technology and
Chapter 52, Emission Control System Testing, Service and Repair, Answer Instructor supplied
homework questions.
QUIZ: Chapter 51 & 52 (online)
TEST: Lighting Systems
WEEK 13:
Emissions
5/16 - 5/20
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Review the MAST eTextbook for final preparation
Apply for Auto Specialist II Certificate
WEEK 14:
Pin Point Testing -- Course Questions
5/23 - 5/27
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets, GPS Lab
HOMEWORK: Review for final
Memorial Day Holiday Monday, May 30, Have Fun, Drive Carefully
Register for new ASE Computer Based Testing
WEEK 15:
BAR Flowchart -- Course Questions
5/31 -6/3
LAB WORK: N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Review for final
Page 14 of 24
01/08/15
Apply for Auto Specialist II Certificate
WEEK 16:
Course Questions
6/6 - 6/10
LAB WORK: Finish N.A.T.E.F. & Instructors Job/Lab Sheets
HOMEWORK: Review for final
TEST: Final – Student Learning Outcome Assessment Test
Have a good semester break
Page 15 of 24
01/08/15
TOOL LIST
AUTO 80
REQUIRED
1) Tool box
2) Ball peen hammer
3) 1 set flat screwdrivers -- at least one 12" long medium tip
4) 1 set phillips screwdrivers
5) 1 3/8" drive socket set (3/8" to 7/8")
6) 1 3/8" drive metric socket set (8 mm to 19 mm)
7) 2 3/8" drive ratchets (one spark plug type 14" with swivel head and one standard type 7")
8) 3/8" extensions (1" 3" 6" 12")
9) 2 channel lock type pliers (7" & 14")
10) 1 standard pliers
11) 1 needle nose pliers with cutters
12) 1 pair diagonal cutters
13) 1 gasket scrapper
14) 1 pair eye protection (not sunglasses)
15) 1 set combination wrenches (5/16" to 7/8")
16) 1 set metric combination wrenches (8 mm to 19 mm)
17) 1 3/8" u-joint
18) 1 good quality computer safe test light
19) Jumper leads (at least 2)
20) Good quality flashlight (standard size) with extra batteries
21) Clothes for lab (shop coat, coveralls, etc. No shorts, sandals, or baggy pants)
22) Golf tee’s
Page 16 of 24
01/08/15
23) Vacuum caps, paper clips
24) Nitrile rubber gloves
Highly recommended
1) Popper clips (at least 2)
2) Nut driver set (1/4" to 1/2")
3) Metric nut driver set
4) Torx driver set
Optional tools
1) 1/4" socket set
2) Gloves
3) DVOM with HZ. & dwell (good quality is best)
Instructors Note: If you are going to work in the automotive field as your career, think about your tool choice -- does it fit your
hand, will it break, will it slip and cause injury. Analyze the quality vs price vs budget
John Sweet Instructor
Page 17 of 24
01/08/15
NOTE: This is your copy of the following
Victor Valley College Automotive Technology Department
Student Policies and Procedures
In addition to the following policies and procedure, students are governed by and expected to abide by
the general rules, code of ethics and conducts of Victor Valley College. Please refer to the student
handbook for complete information.
General Rules
1. All repairs must be supervised by an instructor or qualified assistant designated by the
instructor. The shop may not be used outside of regular scheduled class time or without the
permission and presence of an instructor.
2. If a student needs to leave the shop area during regular scheduled class time they are asked to
inform the instructor.
3. Student are encouraged and in some courses required to bring tools to lab sessions, however
VVCC or its employees are not responsible for the theft of your tools. VVCC will provide an open
top, unmonitored, locked tool storage area, however you are leaving locked toolboxes at your
own risk. If you do not feel comfortable leaving your tools under these conditions you are
encouraged to store them elsewhere.
4. Only students that are currently enrolled in a class are permitted to be in a classroom, the auto
shop library, parking area or in the auto shop work area.
5. All hazardous waste including oil, brake fluids, oil filters, gasoline, solvents and any other
substance generally considered by the State of California to be of a hazardous nature must be
stored and disposed of properly, if you have questions contact the Automotive Instructional
Assistance
6. Students are encouraged to review the (MSDS) Material Safety Data Sheets before contacting
any material or chemical in the shop. MSDS are located in the auto shop library.
Page 18 of 24
01/08/15
7. If a student leaves the lab, class or instruction area during class time the college or its
employees does not assume any liability.
8. Students enrolled in a class that is currently in session may borrow tools from the tool crib to use
in the shop during that lab session. The student must return borrowed tools at the conclusion of
that lab session. Tools are not to be removed from the lab area. The student that has borrowed
the tool will be financial responsible for the tool if it is not returned to the tool crib at the end of
the lab session or is damaged due to a negligence or mischief. Tools will be treated just like
borrowed library books from the library, if the tool is not returned to the tool crib the
corresponding replacement cost be be placed on the student's account until paid in full.
Financial holds on accounts will result in the student losing the ability to register for classes,
holds on graduation and transcripts or other holds as determined by the college. To borrow a
tool the student must surrender their current semester Victor Valley College student
Identification. No other form of identification can be used to borrow tools. (I.E) Students cannot
borrow tools using a driver's license or state ID, cell phone or car keys. ETC.
Service Order Procedures and Lab Rules
1. The instructor must approve all lab projects before work has begun.
2. Students will not be permitted to work in the lab area until they have passed both SP2
automotive safety and pollution training courses and tests with a score of 80% or higher.
3. All vehicles entering the auto shop parking area must have a current work order.
4. Keys will be given to the service advisor and kept in a locked storage area for the duration of the
vehicles stay in the automotive department. Keys can be checked out during lab sessions from
the tool crib with a washer from the tool crib.
5. Only vehicles with a current repair order will be permitted in the shop or rear parking areas.
Student parking is provided in designated parking areas only.
6. All vehicles must have steering wheel covers, seat cover, floor mats and fender covers applied
before repair work is started.
7. Students will be giving a technician work sheet and must document all work that is performed
and all needed additional work on that sheet.
8. An instructor must verify all repairs and the technician worksheet must be signed by the
instructor before the repair order can be closed and the vehicles can leave the lab area.
9. After repairs have been completed and repair orders have been closed vehicles must be removed
from the shop and rear parking areas. Vehicle left without permission may be subject to
impound.
10. All lab projects including vehicles left beyond the last day of the term will assumed to be
abandoned and will be disposed of properly and at the sole discretion of Victor Valley College.
Page 19 of 24
01/08/15
11. The instructor will have the ability to stop any project, assignment, repair or operation at
anytime and for any reason if he or she feels that is being conducted in an unsafe manner, a
safety rule is being violated, or it poses a hazard to anyone.
12. The internet may be accessed in the computer lab of the automotive department during
scheduled class time and only with the permission of the instructor. The following web sites are
the only sites that may be accessed. Students found in violation of the internet rules or
procedure will be subject to the following procedures or may be subject to immediate dismissal
depending on the severity of the infraction.
13. Respiratory protection is required whenever in the presence of vapors or airborne particulate
matter of any kind
14. Students are not permitted to use any piece of shop equipment without being properly trained
on its usage and safety practices.
15. Students are not permitted to drive or road test a vehicle without being accompanied by the
instructor or Instructional Assistant. If the road test is with the instructional Assistant the
student must acquire permission from the instructor.
16. When road testing a vehicle all laws must be obeyed and the vehicle may not be operated in an
unsafe manner.
17. Students who do not possess a valid California driver’s license may not operate or sit in the
driver’s seat of a vehicle.
18. Before starting any vehicle ensure that both feet are in the vehicle, all doors are closed, seat belt
is on and you are prepared to operate the vehicle.
19. Wheels must be chocked on all vehicles before repair work is started.
20. A shop exhaust ventilation hose must be connected to the exhaust pipe of any vehicle running in
the auto shop.
21. If a student doesn't understand the complete and safe operation of a piece of equipment,
service operation or procedure it is not only their right but the responsibility of the student to
stop and ask for proper training from an Instructor and Instruction Assistant before proceeding.
Personal Conduct and Behavior
1. Profanity and inappropriate conversation is unprofessional and will not be permitted.
2. In the Automotive Industry it is very important that you not only behave in a professional
manner, but that you also look professional. Therefore the following mandatory dress policy
must be followed:
a. The Victor Valley College Automotive Department Shirt must be worn to all lab and
class sessions.
b. The designated department shirt must be clean, unwrinkled and worn properly at all
times.
Page 20 of 24
01/08/15
c. You must be bathed, clean, free of malodor, properly groomed and attired before
coming to class. This determination will be made by the instructor and should be
consistent with what an employer would expect during working hours.
d. Your hair must be neat and clean.
e. Fingernails must be clean and cut short. For Safety reasons acrylic are not allowed.
f. Students not abiding by these policies will be dismissed from class for the day and will
not be allowed to make up missed work.
g. Any student who fails to conduct themselves in a professional manner will be removed
from the class and forwarded to the Dean for corrective action.
h. Students are required to conduct themselves in a safe and professional manner when in
the classroom, lab area and when on the VVCC campus.
i. Victor Valley College is a smoke-free institution. Smoking or the use of any tobacco
products or smokeless devices such as e-cigarettes, is prohibited at all campus sites.
Students, staff members and visitors to the campuses of Victor Valley College are
permitted to use tobacco products or smokeless devices in their personal vehicles only.
j. Students are not permitted to take breaks in the rear parking area
k. Eating or drinking is not permitted in the shop, library/computer lab, or the rear parking
area.
l. Thievery of any kind is against department and college rules.
m. Safety glasses are required when in the shop, whether working on a lab project or not.
Smoked colored glasses, sunglasses, and some tinted glasses do not meet the auto shop
standard. Please see instructor before purchasing glasses for proper identification. The
instructor will have final say on what is or is not safe and appropriate. Some operations
may require the additional use of a complete safety shield or tinted lenses for welding or
cutting.
a. Proper close-toed shoes are required in the lab area.
b. Short pants are not permitted in the lab area.
c. Loose or baggy clothing is not recommended and may be unsafe. The instructor will
have final say on what is or is not safe and appropriate.
Shop Cleanup and Maintenance
1.
2.
3.
4.
Students are responsible for keeping and maintaining a clean lab area while working in lab.
Each class will both sweep and mop the entire shop at the end of each lab session.
Students are to ensure that all lab areas are thoroughly cleaned before leaving the lab area.
Cleaning up oil spills from the shop floor:
a. Apply oil absorbent to oil spill and allow sufficient time for oil absorbent to absorb fluid.
b. Sweep up and either recycle or dispose of absorbent in oil absorbent disposal container.
c. Wipe up remaining residue with shop rags and recycle shop rags.
d. After determining floor is free of oil, mop floor with hot soapy water.
Page 21 of 24
01/08/15
5.
6.
7.
8.
e. After ensuring mop water is free of contaminates, dispose of mop water in shop sink.
f. After disposing of used mop water thoroughly clean mop head and bucket and return
empty bucket and clean mop to storage rack. Ensure that mop is returned to the
hanging position to ensure that it dries.
g. (Please not that complete shop cleaning instructions are contained the in Shop
Maintenance guide, however due to the legality of waste oil disposal a brief explanation
was given here.)
All vehicle must be removed from the shop and work areas, parked and locked at the end of the
lab session.
All benches must be cleaned and returned to the proper area at the end of the lab session.
Food and drinks are not allowed in the computer or service advisor areas.
Please notify your instructor and the instructional assistant in the event of a large hazardous
materials spill.
Attendance
1. All students enrolled in a lecture or lab class are required to “clock in” upon their arrival and
“clock out” upon their departure from class. This time card will serve as the official attendance
record for the course. It is the responsibility of the student to ensure that this task is completed
during every class session.
I have read, fully understand and agree to be abide by the Victor Valley College
Departments Policies and Procedures.
Signature: ____________________________________
Print Name: ____________________________________
Page 22 of 24
01/08/15
Date: ________________
After signing and dating above, please return the
entire packet. Your copy of this document is
included in the course syllabus of record of all
Victor Valley College Automotive Courses.
Last Revision 12-16-15
Page 23 of 24
01/08/15
Page 24 of 24
01/08/15