Worksheet 2 – Report Information
Complete the following details:
Name
Name of Instructor
Instructions
To record your answers for the activities and tasks, you will need to:
1) click in the text boxes
2) type your response
When you close the document you will be prompted to save your changes. Save the document to your computer hard drive
or a removable storage device such as a USB drive.
When finished, print it and keep it with the other forms and records. You may be required to submit this document as part
of your evidence of learning for this task. Please check with your instructor or team leader.
Use the worksheet to research the types of problems that may require notification and reporting
in your workplace.
Review your workplace policies and procedures to find out what information is reported, when
and to whom. Attach a copy to this worksheet.
When would you report a situation that was outside usual operational parameters?
What are some different ways that this situation could come to your attention (e.g. customer
complaint or own observation)?
Worksheet 2 – Report information
Page 1 of 2
Use your organisational policies and procedures to complete the following table.
Who would you report the following issues to and in what timeframe?
Issue
Who to make the report to
In what time frame
Contamination of source water with a chemical
spill.
Major changes in raw or treated water quality,
such as turbidity, pH, alkalinity, chlorine levels,
sludge characteristics, floc carry over into
launder weirs.
Level 3 warning on the SCADA (or other control
system).
Lack of response to changes in coagulant and/or
flocculant dose.
Sudden changes in environmental conditions
such as ambient temperature, wind speed and
direction, heavy rainfall.
Sudden changes in influent and effluent water
flow rates.
Sudden changes in influent water temperature.
Equipment failure, such as mixers, pumps,
chlorinators, chemical injectors, warning
systems.
Power failures.
Worksheet 2 – Report information
Page 2 of 2