MechaTools Geometric properties of the composite section

advertisement
MechaTools Technologies
Numerical simulation and finite elements in engineering
Geometric properties of
the composite section
are computed by
ShapeDesigner software:
www.mechatools.com
The French high-speed train (TGV)
17 t
17 t
1 2
3 4
5 6
7 8
3.75
3.52
3
11
3
23 24
25 26 27 28
15.70 + 7x(3 +15.7)
3
15.7
3
3
15.7
3
3.75
3
29 30
11
3
3.52
[m]
237.59 m
Some dynamics results and curves
The critical speeds Vcr
Displaying graphics results for
displacement, moment, etc.r
shear forces
Dynamic Amplification Factor (DAF)
1,60
1,50
1,40
1,30
1,20
1,10
Speed [km/h]
1,00
150
MechaTools Technologies
3030 Louvigny Sainte-Foy , Quebec - G1W1B1 Canada.
Technical Support : support@mechatools.com
Phone: (418)-651-3689; Fax: (418)-651-6456
Information : contact@mechatools.com www.mechatools.com
Copyright© 2003 MechaTools Technologies
200
250
300
350
400
MechaTools Technologies
Numerical simulation and finite elements in engineering
Bancel Viaduct example in BEDAS
Example of Bancel Bridge (France), dynamics analysis under moving French fast speed
train(TGV) computed by BEDAS software:
The Bancel viaduct situated in the South-East of France, is a fast speed train(TGV) railway
bridge . The viaduct is continuous bridge of 5 spans and 3sections kinds. Section 3 is a
cracked concrete region, and the modular ratio between steel and concrete elastic
modulus taken in this example is10 under live loads. The coefficient of damping is take
equal 0.5% of the critical damping and the train speed is varied from 150 to 400 km/h. and
the viaduct is simply supported.
ShapeDesigner Software computes geometric properties of the transverse section (c) and are
given as follow:
Section type
1
2
3
ρ (kg/m3 )
6447.48
80495.86 60622.4
S(m2 )
4.5320
0.363
0.482
Ss(m2 )
0.1495
0.162
0.162
J (m4)
0.4100
0.410
0.410
I z(m4)
1.2150
0.6650
0.964
The Viaduct Model in BEDAS
MechaTools Technologies
3030 Louvigny Sainte-Foy , Quebec - G1W1B1 Canada.
Technical Support : support@mechatools.com
Phone: (418)-651-3689; Fax: (418)-651-6456
Information : contact@mechatools.com www.mechatools.com
Copyright© 2003 MechaTools Technologies
.
Download