Internal Signage 2
UCL
SPECIFICATION OF INTERNAL SIGNAGE
___________________________________________________________________
1.0
Signs to be metal slatted with suitable non-ferrous screw fixings hidden from
view, no sharp edges. End stops in UPVC to be included if part of
manufacturer’s system.
2.0
Signs including lettering to be polyester powder coated or stove enamelled all
sides and edges. Background colour light grey BS 4800/00A01 with catalyst
hardened ink (or similar approved) lettering, black finish. All finished matt.
3.0
Lettering font Ariel. Lettering height, arrows, symbols and sign height to
comply with DDA recommendations. Typeface to be upper and lower case.
4.0
Where room numbers are required these are to be provided as white lettering
on a square grey plate RAL 7031. Height of number plate to be the same as
the adjoining name plate. Number plate fitted to LHS of name plate.
5.0
Signage company to be responsible for:
6.0
5.1
Full size dimensional artwork in electronic format for each sign in
colour with up to two UCL revisions. Include margins, indents,
centering, UCL logo.
5.2
Making arrangements directly with each department for design and
fixing.
5.3
Fixing level, true and square at a suitable height to meet DDA
recommendations.
5.4
Fixing by suitably skilled personnel all to wear identification badges.
5.5
Clear away debris and fill and make good any decorations directly
disturbed.
5.6
Filling, make good, decorations in matching colour to be included
when obsolete signs are removed
5.7
Rates to apply to replacement signs, new signs where none exist and
new slats to be added to existing directories.
Manufacturer’s invoices will be sent directly to Departments. Departments
should verify invoices against the agreed rates and settle invoices within 28
days.
D Bannister
Revised 14.10.2005