2013
Polygon Modeling
1- Customize  Units Setup ( *US Standard "Feet w / Decimal Inches" * Inches )  OK
(Figure 1)
2- Right Click on Snap Toggle  Home Grid (Figure 2)
3- Shelf
a- In the Perspective Window, Create Geometry  Extended Primitives 
ChamferBox
b- Modify  Length (14), Width (55), Height (1), Fillet (0.125), No smooth
4- Side Panel
a- In the Top Window, Create Geometry  Extended Primitives  ChamferBox
(Figure 4)
b- Modify  Length (14), Width (1), Height (16), Fillet (0.125) , No smooth
5- Copy Side Panel ( Shift +LClick) Clone Option  Instance  Number of copies (1)
6- Tools Menu Array ( Count "4" , Instance, * Preview, Incremental "Z=14")
7- For measurement issue ( Create Helpers  Tape  Select 3 Snaps Toggle  RClick
on 3 Snaps Toggle ( Grid Points is active)
8- Draw the Tape  Pin Stack  Modify  Specify Length  Length (79)
9- Select all and Group it  Group Menu  Group
10- To modify Group (Group Open ) to stop modifying (Group Close)
1
‫ قسم التصميم‬-‫ المرحلة الرابعة‬3DMax ‫دروس تعلم احتراف‬
‫ رفاه المطيري‬.‫د‬
‫‪2013‬‬
‫‪Figure 4‬‬
‫د‪ .‬رفاه المطيري‬
‫دروس تعلم احتراف ‪ 3DMax‬المرحلة الرابعة‪ -‬قسم التصميم‬
‫‪2‬‬